My Inquiry
My Account
onsemi ESD5Z5.0T5G
- Part No.:
- ESD5Z5.0T5G
- Manufacturer:
- onsemi
- Category:
- TVS Diodes
- Package:
- SC-79, SOD-523
- Datasheet:
-
ESD5Z5.0T5G.pdf
- Description:
- TVS DIODE 5VWM 18.6VC SOD523
- Quantity:
- Payment:
- Shipping:
Inventory:31,435
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ESD5Z5.0T5G from onsemi is a unidirectional ESD protection diode in SOD-523 package, designed to clamp transient voltages up to 11.6 V at 5.0 A peak pulse current, with 5.0 V working peak reverse voltage, <1 ns response time, and IEC61000-4-2 Level 4 (±30 kV contact) compliance for protecting USB, HDMI, and audio interfaces in portable electronics.
For engineers reviewing the ESD5Z5.0T5G datasheet, pinout, applications, or equivalent options, key selection criteria include clamping voltage at rated IPP, capacitance (80 pF), stand-off voltage margin, PCB space constraints (<1.20 mm × 0.80 mm footprint), and automotive-grade availability via SZ-prefix variants.
Technical Context
The ESD5Z5.0T5G operates as a unidirectional TVS diode, leveraging silicon avalanche breakdown to divert ESD transients away from sensitive ICs. Its 5.0 V VRWM ensures compatibility with 3.3 V and 5 V logic rails while maintaining sufficient margin above system operating voltage.
Clamping occurs within <1 ns of transient onset, limiting voltage stress to ≤11.6 V at 5 A (8/20 µs), and it sustains 174 W peak power per IEC61000-4-2. The device meets AEC-Q101 when ordered as SZESD5Z5.0T5G and supports reflow up to 260 °C with MSL 1 rating.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRWM | 5.0 V - Maximum continuous reverse voltage before leakage exceeds 50 nA; sets safe operating margin for 3.3 V/5 V interfaces. |
| VC @ IPP = 5.0 A | 11.6 V - Clamped voltage during 8/20 µs surge; determines maximum stress on protected IC input pins. |
| IPP Max | 9.4 A - Peak pulse current capability per IEC61000-4-2; defines robustness against ±30 kV contact ESD events. |
| C @ 0 V, 1 MHz | 80 pF - Junction capacitance; impacts signal integrity in high-speed lines like USB 2.0 or HDMI DDC. |
| Response Time | <1 ns - Time to enter clamping conduction; ensures protection before transient propagates into IC core. |
| ESD Rating | Class 3 HBM (>16 kV) - Validated per JESD22-A114; qualifies for handheld and wearable end-equipment. |
| Package | SOD-523 - 1.20 mm × 0.80 mm × 0.60 mm footprint; enables placement adjacent to connectors with minimal board area. |
Pinout & Package
SOD-523 surface-mount package with cathode marked by polarity band; total body height 0.60 mm, void-free thermosetting epoxy meeting UL 94 V-0.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Banded) | Cathode | Connected to protected line (e.g., USB D+); conducts during positive transients to ground. |
| 2 | Anode | Connected to system ground; completes low-impedance path for ESD current diversion. |
Key Features
| Feature | Design Value |
|---|---|
| Low clamping voltage | 11.6 V at 5 A enables protection of 3.3 V I/O without violating absolute maximum ratings of modern SoCs. |
| Ultra-small footprint | 1.20 mm × 0.80 mm SOD-523 allows placement directly at connector entry points, minimizing trace inductance. |
| IEC61000-4-2 Level 4 compliance | ±30 kV contact discharge support ensures pass/fail reliability in final system-level ESD testing. |
| Low leakage current | 50 nA max at 5.0 V VRWM prevents signal degradation or battery drain in always-on sensor interfaces. |
Applications
| USB 2.0 Data Lines | HDMI DDC Channel |
|---|---|
Use Scenario: Protecting differential data pairs in smartphone USB ports against repeated plug/unplug ESD events. IC Role / Device Role / Timing Role: Unidirectional clamping diode placed between D+ and ground, limiting transient voltage to ≤11.6 V. Use Value: Prevents latch-up or gate oxide damage in USB transceivers while adding only 80 pF loading to maintain eye diagram integrity. | Use Scenario: Safeguarding HDMI Display Data Channel (DDC) lines connecting source and display in portable projectors. IC Role / Device Role / Timing Role: Standoff protection element on 5 V DDC_SCL/SDA lines, activated only during ESD surges. Use Value: Maintains DC bias and low-frequency communication integrity while clamping fast transients below 12 V. |
| Smartphone Audio Jack | Automotive Infotainment USB Port |
Use Scenario: Shielding 3.5 mm TRRS jack microphone and headset detection lines in compact handsets. IC Role / Device Role / Timing Role: Single-line ESD suppressor on MIC_BIAS and HP_DET paths, grounded anode configuration. Use Value: Enables reliable hot-plug detection without false triggers, thanks to sub-1 ns response and 50 nA leakage. | Use Scenario: Hardening USB Type-A receptacles in vehicle head units exposed to dry-climate ESD conditions. IC Role / Device Role / Timing Role: Automotive-qualified unidirectional TVS (SZESD5Z5.0T5G variant) on VBUS and data lines. Use Value: Delivers AEC-Q101 validated performance with same 11.6 V clamping and 80 pF capacitance as industrial version. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESD5Z5.0T1G | Same electrical specs and SOD-523 package; differs only in tape-and-reel quantity (3000 vs. 8000 units). | No functional difference; suitable for lower-volume prototyping or small-batch builds. | Select ESD5Z5.0T1G when smaller reel size aligns with assembly line feeder constraints or inventory turnover goals. |
| SZESD5Z5.0T5G | Identical clamping, capacitance, and footprint; certified to AEC-Q101 and PPAP capable. | Required for automotive infotainment, telematics, or ADAS subsystems where qualification documentation is mandatory. | Choose SZESD5Z5.0T5G for production programs needing automotive-grade traceability, change control, and failure analysis support. |
Compared with ESD5Z5.0T1G and SZESD5Z5.0T5G, the ESD5Z5.0T5G offers identical protection performance and packaging but targets high-volume industrial and consumer manufacturing with optimized reel size-making it ideal for automated SMT lines requiring extended run time between reel changes.
Availability
ESD5Z5.0T5G is available at Aetrix Electronics and suitable for USB interface protection, HDMI DDC hardening, and smartphone audio jack safeguarding requiring stable component supply across consumer, industrial, and medical portable designs.
Supply support for ESD5Z5.0T5G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi (Semiconductor Components Industries, LLC) is a global supplier of energy-efficient semiconductor solutions, specializing in analog, discrete, and power management devices for automotive, industrial, and cloud power applications.
The ESD5Z Series was developed to deliver ultra-compact, high-performance ESD protection for space-constrained portable electronics, with emphasis on low clamping voltage, minimal capacitance, and full IEC61000-4-2 Level 4 compliance.
FAQ
What is the maximum clamping voltage of ESD5Z5.0T5G under IEC61000-4-2 surge conditions?
The ESD5Z5.0T5G clamps to a maximum of 11.6 V at 5.0 A peak pulse current (8/20 µs waveform), as specified in the onsemi datasheet. This value represents the upper limit of voltage seen by the protected circuit during a standardized ESD event, ensuring compatibility with 3.3 V and 5 V I/O structures. The actual clamping voltage may be lower depending on test setup parasitics and current magnitude.
Is ESD5Z5.0T5G suitable for bidirectional signal lines such as USB D+/D−?
No - ESD5Z5.0T5G is a unidirectional diode intended for single-ended lines referenced to ground (e.g., VBUS, MIC_BIAS, DDC_SCL). For bidirectional differential pairs like USB D+/D−, a bidirectional variant such as ESD7L5.0DT5G or dual-rail configuration is required. Using ESD5Z5.0T5G on bidirectional lines risks forward conduction during normal signal swings.
What is the junction capacitance of ESD5Z5.0T5G and how does it affect high-speed interfaces?
The ESD5Z5.0T5G exhibits 80 pF typical capacitance at 0 V and 1 MHz, measured across its terminals. In USB 2.0 applications, this adds measurable loading to data lines and may degrade signal rise/fall times or eye opening if placed directly in series with D+/D−. It is best applied on auxiliary lines (VBUS, ID, or DDC) rather than primary high-speed differential paths.
Does ESD5Z5.0T5G meet automotive qualification standards?
Standard ESD5Z5.0T5G is not AEC-Q101 qualified; however, the SZESD5Z5.0T5G variant - identical in all electrical and mechanical specifications - is fully AEC-Q101 qualified and PPAP capable. Engineers designing for automotive infotainment or body control modules must specify the SZ-prefix part to satisfy OEM qualification requirements.
What is the thermal resistance and power derating behavior of ESD5Z5.0T5G?
ESD5Z5.0T5G has no published RθJA value due to its transient-only duty cycle; its 500 mW steady-state dissipation rating applies only to DC or low-duty-cycle conditions. During ESD events, energy is absorbed in <100 ns, so thermal mass dominates over convection. Derating is unnecessary for compliant IEC61000-4-2 pulses, but repeated surges require PCB copper area ≥1 cm² per the datasheet's FR-4 test condition.
ESD5Z5.0T5G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Package/Case:
- SC-79, SOD-523
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 1
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 6.2V
- Voltage - Clamping (Max) @ Ipp:
- 18.6V
- Current - Peak Pulse (10/1000µs):
- 9.4A (8/20µs)
- Power - Peak Pulse:
- 174W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 80pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOD-523
ESD5Z5.0T5G FAQ
1.How can I place an order for ESD5Z5.0T5G through Aetrix?
Please submit a Request for Quotation (RFQ) for ESD5Z5.0T5G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ESD5Z5.0T5G reliable?
The price and inventory of ESD5Z5.0T5G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ESD5Z5.0T5G is usually 5 days.
3.What payment methods are accepted for ESD5Z5.0T5G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ESD5Z5.0T5G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ESD5Z5.0T5G?
ESD5Z5.0T5G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ESD5Z5.0T5G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ESD5Z5.0T5G?
For technical support, including ESD5Z5.0T5G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ESD5Z5.0T5G requirements.
6.How does Aetrix verify that ESD5Z5.0T5G is sourced from the original manufacturer or authorized distributors?
All ESD5Z5.0T5G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ESD5Z5.0T5G meets industry standards.
7.What is the process for return or replacement of ESD5Z5.0T5G?
All ESD5Z5.0T5G units undergo pre-shipment inspection (PSI). If there is an issue with ESD5Z5.0T5G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ESD5Z5.0T5G part is unused and in its original packaging.
Return procedure for ESD5Z5.0T5G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ESD5Z5.0T5G Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
