My Inquiry
My Account
onsemi ESD5Z7.0T1
- Part No.:
- ESD5Z7.0T1
- Manufacturer:
- onsemi
- Category:
- TVS Diodes
- Package:
- SC-79, SOD-523
- Datasheet:
-
ESD5Z7.0T1.pdf
- Description:
- TVS DIODE 7VWM 22.7VC SOD523
- Quantity:
- Payment:
- Shipping:
Inventory:5,214
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ESD5Z7.0T1 from onsemi is a unidirectional ESD protection diode in SOD-523 package, featuring 7.0 V working peak reverse voltage (VRWM), 13.5 V clamping voltage at 5 A (VC), 22.7 A maximum peak pulse current (IPP), and 65 pF capacitance - designed for high-density I/O line protection in portable electronics.
For engineers reviewing the ESD5Z7.0T1 datasheet, pinout, applications, or equivalent options, key selection criteria include IEC 61000-4-2 Level 4 compliance (±30 kV contact), <1 ns response time, low leakage (<10 nA @ 7.0 V), and compact 1.20 mm × 0.80 mm footprint with MSL 1 reflow capability.
Technical Context
This device operates as a unidirectional transient voltage suppressor, leveraging silicon avalanche breakdown to clamp ESD transients before they reach downstream ICs. Its low 7.0 V stand-off voltage ensures compatibility with 3.3 V and 5 V logic rails while maintaining margin against normal operating voltage excursions.
Clamping performance is validated per IEC 61000-4-2 (±30 kV contact/air) and IEC 61000-4-4 (40 A EFT), with peak power dissipation of 200 W under 8/20 µs surge. The SOD-523 package enables placement directly at connector or port entry points without compromising board space.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRWM | 7.0 V - Maximum continuous reverse voltage before leakage exceeds 10 nA; sets safe operating margin for 3.3 V/5 V interfaces |
| VC @ IPP = 5 A | 13.5 V - Clamped voltage during 5 A ESD pulse; limits stress on protected IC's absolute maximum rating |
| IPP | 22.7 A - Peak pulse current survivability per IEC 61000-4-2; correlates to ±30 kV contact discharge robustness |
| C @ 0 V, 1 MHz | 65 pF - Signal-line capacitance; suitable for USB 2.0, HDMI, and audio lines without data integrity loss |
| Response Time | <1 ns - Enables suppression before transient propagates beyond PCB trace; critical for high-speed I/O |
| ESD Rating | Class 3 HBM (>16 kV) - Meets JEDEC JS-001-2018 for system-level reliability in handheld devices |
| Package | SOD-523 (1.20 mm × 0.80 mm × 0.60 mm) - Enables placement within 2 mm of I/O connector for optimal protection efficacy |
Pinout & Package
SOD-523 surface-mount package with cathode band marking; 0.7 mm body height, Pb-free matte tin lead finish, MSL 1 rated for 260 °C reflow.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Banded) | Cathode | Connected to protected signal line; conducts during positive transients to ground |
| 2 | Anode | Connected to system ground; completes clamping path for bidirectional ESD events when used with complementary diode or in unidirectional configuration |
Key Features
| Feature | Design Value |
|---|---|
| IEC 61000-4-2 Level 4 Compliance | ±30 kV contact discharge protection - eliminates need for external test fixtures during system certification |
| Low Clamping Voltage | 13.5 V at 5 A - keeps protected IC below 15 V absolute max rating even under worst-case ESD strike |
| Ultra-Low Capacitance | 65 pF - preserves signal integrity on 480 Mbps USB 2.0 differential pairs without eye diagram degradation |
| Fast Response Time | <1 ns - activates before transient energy couples into adjacent traces or IC input stages |
| Pb-Free & RoHS Compliant | 100% matte Sn finish, UL 94 V-0 mold compound - meets global environmental compliance and soldering process requirements |
Applications
| USB 2.0 Data Lines | HDMI Interface Protection |
|---|---|
Use Scenario: Protecting D+ and D− pins of USB 2.0 ports in smartphones and tablets against repeated ESD events during cable insertion. IC Role / Device Role / Timing Role: Unidirectional clamping diode placed between signal line and ground, activated only during overvoltage transients. Use Value: 65 pF capacitance avoids USB 2.0 eye mask violations; 13.5 V clamping prevents PHY damage while maintaining VBUS isolation. | Use Scenario: Safeguarding TMDS clock and data channels in portable media players and docking stations exposed to user-handling ESD. IC Role / Device Role / Timing Role: Point-of-entry transient suppressor mounted within 3 mm of HDMI connector shell ground. Use Value: 22.7 A IPP withstands multiple IEC 61000-4-2 strikes; low leakage preserves DC bias stability on high-impedance TMDS receivers. |
| Smartphone Button/Keypad Lines | Industrial Sensor Interface |
Use Scenario: Shielding mechanical button debouncing circuits and capacitive touch keys from human-body ESD in consumer handsets. IC Role / Device Role / Timing Role: Low-leakage (≤10 nA) unidirectional suppressor tied to microcontroller GPIO with internal pull-up. Use Value: Prevents false triggering or latch-up during 16 kV HBM events; 7.0 V VRWM avoids interference with 3.3 V logic thresholds. | Use Scenario: Protecting analog front-end inputs of industrial temperature/humidity sensors connected via long cables in factory environments. IC Role / Device Role / Timing Role: First-stage protection element before TVS array or op-amp input stage, handling fast EFT bursts per IEC 61000-4-4. Use Value: 40 A EFT rating ensures immunity to switching noise from nearby relays/motors; SOD-523 size allows dense sensor node layouts. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESD5Z7.0T5G | Same electrical specs; 8000 pcs/reel vs. 3000 pcs/reel packaging | No functional difference; suited for high-volume production runs requiring larger reels | Select ESD5Z7.0T5G when optimizing for automated assembly throughput and reduced reel change frequency |
| TPD2E001DRYR | Bi-directional, 10 pF capacitance, 12 V clamping at 1 A, SOT-553 package | Better for ultra-high-speed lines (e.g., USB 3.0); lower clamping but higher VRWM (5.5 V) | Choose TPD2E001DRYR where sub-15 pF capacitance is mandatory and 5.5 V stand-off suffices |
Compared with ESD5Z7.0T1, ESD5Z7.0T5G offers identical protection performance with higher reel quantity, while TPD2E001DRYR trades higher stand-off margin for significantly lower capacitance - making it preferable for >1 Gbps serial links but unsuitable for 7 V rail protection.
Availability
ESD5Z7.0T1 is available at Aetrix Electronics and suitable for USB 2.0 interface protection, smartphone keypad ESD hardening, and industrial sensor front-end safeguarding requiring stable component supply and full traceability.
Supply support for ESD5Z7.0T1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi (formerly ON Semiconductor) is a global semiconductor supplier delivering energy-efficient, intelligent power and sensing solutions for automotive, industrial, cloud, medical, and IoT applications.
The ESD5Z Series targets space-constrained portable electronics, providing certified IEC 61000-4-2/4-4 protection in the smallest possible footprint without sacrificing clamping performance or reliability.
FAQ
What is the maximum working voltage supported by ESD5Z7.0T1?
The ESD5Z7.0T1 has a working peak reverse voltage (VRWM) of 7.0 V, meaning it reliably blocks up to 7.0 V in normal operation while remaining fully functional. This makes ESD5Z7.0T1 appropriate for protecting 3.3 V and 5 V digital interfaces where transient overvoltage must be clamped without interfering with steady-state signaling. Exceeding 7.0 V continuously risks increased leakage or premature conduction.
Does ESD5Z7.0T1 meet automotive qualification standards?
The base ESD5Z7.0T1 is not AEC-Q101 qualified; however, its automotive-grade variant SZESD5Z7.0T1G is explicitly listed in the datasheet as AEC-Q101 qualified and PPAP capable. ESD5Z7.0T1 itself is intended for commercial and industrial portable applications. For automotive use, designers must specify the SZ-prefix version to ensure compliance with automotive reliability and change control requirements.
What is the clamping voltage of ESD5Z7.0T1 under real ESD stress?
The ESD5Z7.0T1 clamps to 13.5 V when subjected to a 5 A IEC 61000-4-2 compliant transient, and up to 22.7 V at its maximum rated peak pulse current of 22.7 A. These values are measured using the standardized 8/20 µs waveform and reflect actual voltage seen by the protected IC during an ESD event - critical for verifying margin against downstream component absolute maximum ratings.
Can ESD5Z7.0T1 be used for bidirectional signal lines like USB D+ and D−?
ESD5Z7.0T1 is unidirectional and must be used in pairs (anode-to-ground + cathode-to-signal) or with a complementary diode to protect bidirectional lines. For native bidirectional protection, onsemi offers the ESD7XXX series or alternatives like TPD2E001DRYR. Using a single ESD5Z7.0T1 on a bidirectional line leaves negative transients unprotected unless combined with proper grounding topology.
What is the thermal limit for ESD5Z7.0T1 during reflow soldering?
ESD5Z7.0T1 is rated for a maximum lead solder temperature of 260 °C for 10 seconds and meets J-STD-020 Moisture Sensitivity Level 1 (MSL 1), meaning it can be stored indefinitely at ≤30 °C/85% RH without baking. Its thermosetting plastic package and matte tin finish ensure reliable performance through standard lead-free reflow profiles without delamination or voiding.
ESD5Z7.0T1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Package/Case:
- SC-79, SOD-523
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Type:
- Zener
- Unidirectional Channels:
- 1
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 7V (Max)
- Voltage - Breakdown (Min):
- 7.5V
- Voltage - Clamping (Max) @ Ipp:
- 22.7V
- Current - Peak Pulse (10/1000µs):
- 8.8A (8/20µs)
- Power - Peak Pulse:
- 200W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 65pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOD-523
ESD5Z7.0T1 FAQ
1.How can I place an order for ESD5Z7.0T1 through Aetrix?
Please submit a Request for Quotation (RFQ) for ESD5Z7.0T1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ESD5Z7.0T1 reliable?
The price and inventory of ESD5Z7.0T1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ESD5Z7.0T1 is usually 5 days.
3.What payment methods are accepted for ESD5Z7.0T1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ESD5Z7.0T1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ESD5Z7.0T1?
ESD5Z7.0T1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ESD5Z7.0T1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ESD5Z7.0T1?
For technical support, including ESD5Z7.0T1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ESD5Z7.0T1 requirements.
6.How does Aetrix verify that ESD5Z7.0T1 is sourced from the original manufacturer or authorized distributors?
All ESD5Z7.0T1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ESD5Z7.0T1 meets industry standards.
7.What is the process for return or replacement of ESD5Z7.0T1?
All ESD5Z7.0T1 units undergo pre-shipment inspection (PSI). If there is an issue with ESD5Z7.0T1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ESD5Z7.0T1 part is unused and in its original packaging.
Return procedure for ESD5Z7.0T1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ESD5Z7.0T1 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
