My Inquiry
My Account
onsemi ESD7104MUTAG
- Part No.:
- ESD7104MUTAG
- Manufacturer:
- onsemi
- Category:
- TVS Diodes
- Package:
- 10-UFDFN
- Datasheet:
-
ESD7104MUTAG.pdf
- Description:
- TVS DIODE 5VWM 10VC 10UDFN
- Quantity:
- Payment:
- Shipping:
Inventory:12,210
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ESD7104MUTAG from onsemi is a low-capacitance ESD protection diode designed for high-speed differential data lines including USB 3.0, HDMI 1.4, and eSATA 3.0. It delivers 0.3 pF typical junction capacitance (I/O to GND), ±15 kV IEC 61000−4−2 contact/air ESD rating, and 10 V clamping voltage at 1 A surge, enabling signal integrity preservation in 5–6 Gb/s interfaces.
For engineers reviewing the ESD7104MUTAG datasheet, pinout, applications, or equivalent options, this device is selected for ultra-low capacitance, flow-through UDFN10 layout compatibility with matched trace routing, and AEC-Q101-qualified variants in the same family - critical for high-speed interface protection where insertion loss and eye diagram fidelity are design-critical.
Technical Context
The ESD7104MUTAG integrates four independent bidirectional ESD protection diodes in a single UDFN10 package, each configured between an I/O line and GND. Its flow-through pin arrangement (Pins 1–5 and 7–10 as I/Os, Pins 6 & 9 as GND) supports symmetrical PCB routing for differential pairs without stubs or impedance discontinuities.
It operates across −55°C to +125°C junction temperature and meets IEC 61000−4−2 Level 4 (±15 kV contact/air), with TLP-tested clamping performance up to ±16 A (19.5 V). The 0.3 pF capacitance is measured at 1 MHz with VR = 0 V between I/O and GND - a value validated for minimal signal degradation in 5+ Gb/s serial links.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Capacitance (I/O–GND) | 0.3 pF typical - preserves signal integrity in USB 3.0 (5 Gb/s) and HDMI 1.4 (3.4 Gb/s) channels |
| ESD Rating | ±15 kV per IEC 61000−4−2 contact/air - exceeds Level 4 system-level immunity requirements |
| Clamping Voltage (1 A) | 10 V - limits transient overvoltage to safe levels for 5.0 V-tolerant transceivers |
| Working Voltage | 5.0 V VRWM - compatible with standard 3.3 V/5.0 V I/O rails without leakage-induced bias shift |
| Junction Temp Range | −55°C to +125°C - supports industrial and automotive under-hood environments |
| Package | UDFN10 (2.5 × 1.0 mm, 0.5 mm pitch) - enables compact, flow-through PCB layout for differential pair routing |
Pinout & Package
ESD7104MUTAG uses the UDFN10 (Case 517BB) package: 2.5 mm × 1.0 mm body, 0.5 mm pitch, wettable flank–capable, Pb-free, RoHS-compliant. Its flow-through layout minimizes trace length mismatch for differential signaling.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 3, 4, 5 | I/O (Channel A–E) | Five dedicated input/output terminals - Pins 1–4 and 5 serve as protected high-speed data lines (e.g., USB3 SSTX+/−, SSRX+/−) |
| 6, 9 | GND | Dual ground connections - provide low-inductance return path and support balanced current sharing during ESD events |
| 7, 8, 10 | I/O (Channel F–H) | Three additional I/O terminals - Pin 7 used for HDMI D0+/−, Pin 8 for CLK+/−, Pin 10 for HPD/CEC protection |
| N/C | No Connect | Pins 6 and 9 are functional GND; all other pins are assigned - no unused terminals in this configuration |
Key Features
| Feature | Design Value |
|---|---|
| Flow-through UDFN10 layout | Enables matched-length, impedance-controlled routing for USB 3.0/HDMI differential pairs without vias or stubs |
| 0.3 pF I/O-to-GND capacitance | Minimizes insertion loss (< −2 dB @ 5 GHz) and preserves eye opening in 5–6 Gb/s serial links |
| ±15 kV IEC 61000−4−2 protection | Meets highest system-level ESD immunity requirement without external TVS cascading |
| AEC-Q101 qualified variant available | SZESD7104MUTAG supports automotive infotainment and ADAS video/data links requiring PPAP documentation |
| UL 94 V−0 flammability rating | Ensures compliance with enclosure safety standards for consumer and industrial end equipment |
Applications
| USB 3.0 Interface Protection | HDMI 1.4 Video Link Protection |
|---|---|
Use Scenario: Protecting SuperSpeed TX/RX differential pairs and VBUS/GND lines on Type-A and Micro-B connectors against ESD during hot-plug events. IC Role / Device Role / Timing Role: Bidirectional transient voltage suppressor placed directly at connector entry point, before the USB 3.0 PHY. Use Value: Maintains 5.0 Gb/s eye diagram integrity (Figure 10) with <0.3 pF loading - prevents jitter increase and bit error rate degradation. | Use Scenario: Shielding TMDS clock and data channels (CLK+/−, D0+/−, D1+/−, D2+/−) on HDMI Type-A connectors from user-handling ESD. IC Role / Device Role / Timing Role: Per-channel ESD clamp tied to GND, co-located with connector to minimize loop inductance. Use Value: Enables clean 3.4 Gb/s eye diagrams (Figure 11) and meets HDMI compliance test margins without signal conditioning. |
| eSATA 3.0 Data Line Protection | DisplayPort Main Link Protection |
Use Scenario: Safeguarding 6 Gb/s eSATA transmit/receive lanes on external storage enclosures exposed to frequent cable insertion/removal. IC Role / Device Role / Timing Role: Low-capacitance shunt protector mounted adjacent to eSATA connector, referenced to chassis GND. Use Value: Preserves 6 Gb/s signal fidelity (Figure 12) and reduces post-layout rework due to ESD-induced link training failures. | Use Scenario: Protecting DisplayPort main link lanes (AUX CH, HPD, and high-speed data pairs) in thin-client docking stations and monitors. IC Role / Device Role / Timing Role: Multi-channel ESD suppressor covering AUX, HPD, and all four DP data lanes in one footprint. Use Value: Eliminates need for discrete diodes per lane - reduces BOM count by 75% while maintaining <0.35 pF per channel. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESD7L5.0DT5G | Single-channel, SOD-523, 5.0 V VRWM, 0.45 pF capacitance - higher capacitance than ESD7104MUTAG | Used for single-line protection (e.g., USB2 D+/D−), not multi-lane high-speed interfaces | Select when protecting legacy USB 2.0 or UART lines where space allows discrete placement per line |
| NUP4114MR6T1G | Quad-channel SC-70, 5.5 V VRWM, 0.8 pF typical - 2.7× higher capacitance than ESD7104MUTAG | Targeted at lower-speed interfaces (≤480 Mbps); unsuitable for >1 Gb/s eye integrity | Choose only for cost-sensitive industrial control I/O where bandwidth ≤100 MHz is acceptable |
Compared with ESD7L5.0DT5G and NUP4114MR6T1G, the ESD7104MUTAG uniquely supports 5–6 Gb/s differential signaling via its 0.3 pF capacitance, flow-through UDFN10 layout, and eight-channel integration - making it the only option among the three qualified for USB 3.0, HDMI 1.4, and eSATA 3.0 full-interface protection without performance trade-offs.
Availability
ESD7104MUTAG is available at Aetrix Electronics and suitable for USB 3.0 host controllers, HDMI 1.4 source devices, and eSATA 3.0 external storage interfaces requiring stable component supply across industrial, computing, and consumer electronics programs.
Supply support for ESD7104MUTAG includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi (formerly ON Semiconductor) is a global semiconductor supplier delivering energy-efficient, intelligent power and sensing solutions for automotive, industrial, cloud, medical, and IoT applications.
The ESD7104MUTAG belongs to onsemi's high-speed ESD protection diode product line, engineered specifically to safeguard gigabit serial interfaces - balancing ultra-low capacitance, robust ±15 kV ESD immunity, and compact flow-through packaging for next-generation connectivity.
FAQ
What is the maximum operating junction temperature for ESD7104MUTAG?
The ESD7104MUTAG has a specified operating junction temperature range of −55°C to +125°C, as confirmed in the Maximum Ratings table of the official datasheet. This wide thermal range ensures reliable operation in demanding environments such as automotive infotainment head units and industrial video processing modules where ambient temperatures exceed 85°C. The ESD7104MUTAG maintains its 0.3 pF capacitance and ±15 kV ESD rating across this full range.
Does ESD7104MUTAG support USB 3.0 SuperSpeed differential pair routing?
Yes, the ESD7104MUTAG is explicitly designed for USB 3.0 SuperSpeed protection, as demonstrated in Figure 10 of the datasheet showing preserved eye diagrams at 5.0 Gb/s. Its flow-through UDFN10 pinout (Pins 1–4 and 7–10 as I/O, Pins 6 & 9 as GND) enables matched-length PCB traces for SSTX+/− and SSRX+/− pairs without stubs or vias - a key requirement for maintaining 90 Ω differential impedance and minimizing skew in the ESD7104MUTAG-protected link.
Is ESD7104MUTAG pin-compatible with SZESD7104MUTAG?
Yes, ESD7104MUTAG and SZESD7104MUTAG share identical UDFN10 (Case 517BB) packaging, pinout, and electrical specifications. The "SZ" prefix denotes AEC-Q101 qualification and PPAP capability for automotive use, while ESD7104MUTAG is the commercial-grade version. Both parts use the same 7M marking and 3000-piece tape-and-reel packaging - allowing drop-in replacement in non-automotive designs without layout changes.
What is the clamping voltage of ESD7104MUTAG under IEC 61000−4−2 ±8 kV contact discharge?
The ESD7104MUTAG clamping voltage under IEC 61000−4−2 ±8 kV contact discharge is shown in Figures 1 and 2 of the datasheet, with peak clamped voltages below 14 V for positive pulses and above −14 V for negative pulses. These waveforms confirm sub-15 V clamping across the full ±8 kV event - critical for protecting 5.0 V-tolerant USB 3.0 and HDMI transceivers without latch-up or damage during real-world ESD exposure.
Can ESD7104MUTAG be used for HDMI 2.0 or higher interfaces?
No - the ESD7104MUTAG is characterized and validated for HDMI 1.4 (3.4 Gb/s) as stated in the Typical Applications section and Figure 11. While its 0.3 pF capacitance is favorable, HDMI 2.0 (6 Gb/s per lane) and HDMI 2.1 (12 Gb/s) require stricter insertion loss and crosstalk control beyond the ESD7104MUTAG's published 5 GHz S21 data (Figure 13). For HDMI 2.0+, onsemi recommends newer devices such as ESD7204MUTAG with enhanced RF performance - the ESD7104MUTAG is not rated for those speeds.
ESD7104MUTAG Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Package/Case:
- 10-UFDFN
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 4
- Voltage - Reverse Standoff (Typ):
- 5V
- Voltage - Breakdown (Min):
- 5.5V
- Voltage - Clamping (Max) @ Ipp:
- 10V
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- HDMI, USB
- Capacitance @ Frequency:
- 0.3pF @ 1MHz
- Operating Temperature:
- -55°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 10-UDFN (2.5x1)
ESD7104MUTAG FAQ
1.How can I place an order for ESD7104MUTAG through Aetrix?
Please submit a Request for Quotation (RFQ) for ESD7104MUTAG on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ESD7104MUTAG reliable?
The price and inventory of ESD7104MUTAG are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ESD7104MUTAG is usually 5 days.
3.What payment methods are accepted for ESD7104MUTAG?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ESD7104MUTAG transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ESD7104MUTAG?
ESD7104MUTAG orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ESD7104MUTAG order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ESD7104MUTAG?
For technical support, including ESD7104MUTAG datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ESD7104MUTAG requirements.
6.How does Aetrix verify that ESD7104MUTAG is sourced from the original manufacturer or authorized distributors?
All ESD7104MUTAG products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ESD7104MUTAG meets industry standards.
7.What is the process for return or replacement of ESD7104MUTAG?
All ESD7104MUTAG units undergo pre-shipment inspection (PSI). If there is an issue with ESD7104MUTAG, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ESD7104MUTAG part is unused and in its original packaging.
Return procedure for ESD7104MUTAG:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ESD7104MUTAG Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
