My Inquiry
My Account
Texas Instruments ESD761DPYRQ1
- Part No.:
- ESD761DPYRQ1
- Manufacturer:
- Texas Instruments
- Category:
- TVS Diodes
- Package:
- 0402 (1006 Metric)
- Datasheet:
-
ESD761DPYRQ1.pdf
- Description:
- AUTOMOTIVE, 1.1-PF, 24-V, 15-KV
- Quantity:
- Payment:
- Shipping:
Inventory:5,705
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ESD761DPYRQ1 from Texas Instruments is a single-channel, bidirectional automotive-grade TVS diode for LIN bus ESD protection, featuring ±24V working voltage, 1.1pF typical I/O capacitance, ±15kV IEC 61000-4-2 contact discharge rating, and AEC-Q101 qualification for use in headlight modules, door ECUs, and climate control systems.
For engineers reviewing the ESD761DPYRQ1 datasheet, ESD761DPYRQ1 pinout, ESD761DPYRQ1 application, or ESD761DPYRQ1 equivalent, this page delivers verified electrical specs, X1SON package layout guidance, LIN-specific clamping performance at 1.8A (8/20µs), thermal resistance data (RθJA = 282.3°C/W), and direct alternative part comparisons for automotive signal-line robustness design.
Technical Context
The ESD761DPYRQ1 operates as a passive bidirectional clamp with VRWM = ±24V and VBR = ±25.5V minimum, activating above breakdown to divert ESD transients to ground while maintaining ultra-low leakage (≤50nA at ±24V). Its 0.53Ω dynamic resistance ensures low clamping voltage under surge conditions.
Designed specifically for LIN physical layer protection, it supports data rates up to 10Mbps due to its 1.1pF line capacitance and integrates into compact automotive ECUs via the 1.00mm × 0.60mm X1SON (DPY) leadless package with exposed thermal pad and MSL Level-1 reflow profile.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Working Voltage | ±24V - Withstands automotive short-to-battery events without conduction. |
| IEC 61000-4-2 ESD Rating | ±15kV contact / ±15kV air-gap - Meets Level 4 immunity for harsh vehicle environments. |
| Clamping Voltage | 36.3V at 1.8A (8/20µs) - Limits transient overvoltage seen by downstream LIN transceiver. |
| I/O Capacitance | 1.1pF typical - Enables clean signal integrity up to 10Mbps LIN data rate. |
| Dynamic Resistance | 0.53Ω - Minimizes voltage overshoot during fast ESD pulse conduction. |
| Operating Temperature | –55°C to +150°C - Fully rated for under-hood and cabin ECU deployment. |
| Junction-to-Ambient RθJA | 282.3°C/W - Quantifies thermal derating needed for sustained surge duty cycles. |
Pinout & Package
X1SON (DPY) 2-pin leadless package: 1.00mm × 0.60mm body size, 0.45mm max height, exposed thermal pad on bottom, MSL Level-1 (260°C, unlimited reflow), compatible with automated optical inspection (AOI)-free assembly.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | I/O | Bidirectional protected signal line - connects directly to LIN bus trace before transceiver input. |
| 2 | GND | Low-inductance ground return - must connect to solid ground plane via multiple vias under exposed pad. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping | Protects against polarity-reversal faults and both positive/negative ESD strikes without external biasing. |
| AEC-Q101 qualification | Validated for automotive production use across temperature, humidity, and mechanical stress test profiles. |
| Ultra-low leakage | ≤50nA at ±24V - Prevents power drain in always-on LIN nodes during sleep mode. |
| Thermal performance | RθJB = 98.3°C/W - Enables efficient heat transfer to PCB ground plane for repeated surge handling. |
| Leadless X1SON footprint | Reduces board area by >50% vs. SOD-523; eliminates solder wicking concerns and improves high-frequency impedance matching. |
Applications
| Headlight Control Module | Door Module ECU |
|---|---|
Use Scenario: LIN communication between body controller and LED headlight driver IC under hood temperature cycling and vibration. IC Role / Device Role / Timing Role: ESD761DPYRQ1 serves as primary front-end transient suppressor on LIN bus line entering headlight housing. Use Value: 1.1pF capacitance prevents signal distortion at 20Kbps–10Mbps LIN rates; ±15kV ESD rating withstands service technician handling discharges. |
Use Scenario: LIN network linking door latch, window motor, and mirror position sensors in side-door assembly. IC Role / Device Role / Timing Role: ESD761DPYRQ1 placed at connector interface to shunt ESD from cable harness before LIN transceiver input. Use Value: 0.53Ω dynamic resistance ensures clamping voltage stays below 36.3V during 1.8A surge, protecting transceiver's 36V absolute max rating. |
| Climate Control Panel | Roof Console Module |
Use Scenario: LIN-based HVAC actuator feedback loop inside dashboard, subject to user-touch ESD and thermal cycling. IC Role / Device Role / Timing Role: ESD761DPYRQ1 guards LIN RX/TX lines between microcontroller and HVAC transceiver IC. Use Value: –55°C to +150°C operating range covers full automotive ambient envelope; 24V VRWM tolerates jump-start battery reversal events. |
Use Scenario: Roof-mounted sunroof, ambient light, and occupancy sensor cluster communicating via LIN to main body controller. IC Role / Device Role / Timing Role: ESD761DPYRQ1 deployed at PCB edge near FAKRA connector to intercept ESD before routing to LIN PHY. Use Value: X1SON DPY package enables placement within 2mm of connector - minimizing inductance and improving high-frequency ESD suppression efficacy. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESD751DYARQ1 | SOD-523 (DYA) package; 1.6pF capacitance; ±22kV IEC contact rating; 2.8A IEC 61000-4-5 surge current. | Higher capacitance limits max LIN speed to ~5Mbps; larger footprint requires more board space. | Select when higher ESD margin is prioritized over board area and data rate. |
| ESD1LIN24DYFRQ1 | SOD-323 (DYF) package; 2.3pF capacitance; ±30kV IEC contact rating; 4.3A IEC 61000-4-5 surge current. | Higher capacitance restricts use to ≤20Kbps LIN; largest footprint among the three variants. | Select for legacy designs requiring maximum surge current handling and AOI compatibility. |
Compared with ESD751DYARQ1 and ESD1LIN24DYFRQ1, ESD761DPYRQ1 offers the smallest footprint and lowest capacitance-enabling 10Mbps LIN operation in space-constrained modules-while trading off some ESD voltage margin and surge current capacity for miniaturization and thermal efficiency.
Availability
ESD761DPYRQ1 is available at Aetrix Electronics and suitable for automotive headlight control, door module ECUs, and climate control systems requiring stable component supply across extended temperature ranges and long product lifecycles.
Supply support for ESD761DPYRQ1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor company specializing in analog and embedded processing technologies, with leadership in automotive-grade reliability and functional safety solutions.
ESD761DPYRQ1 belongs to TI's automotive-qualified ESD protection portfolio designed specifically for LIN bus robustness in safety-critical electronic control units, emphasizing low capacitance, AEC-Q101 compliance, and compact packaging for modern vehicle architectures.
FAQ
What is the maximum LIN data rate supported by ESD761DPYRQ1?
ESD761DPYRQ1 supports LIN data rates up to 10Mbps due to its 1.1pF typical I/O capacitance, which minimizes signal rise-time degradation and maintains waveform fidelity across the standard LIN frequency band. This value is measured at 1MHz with 30mVpp bias and confirmed in TI's Electrical Characteristics table (Section 5.7).
Does ESD761DPYRQ1 require external biasing or control signals?
No, ESD761DPYRQ1 is a passive bidirectional TVS diode and requires no external power, biasing, or control logic. It remains in high-impedance state below ±24V VRWM and automatically activates during overvoltage transients. Its bidirectional architecture inherently protects both polarities without additional circuitry.
What is the thermal resistance from junction to board (RθJB) for ESD761DPYRQ1?
The junction-to-board thermal resistance (RθJB) for ESD761DPYRQ1 is 98.3°C/W, as specified in Section 5.6 of the datasheet. This value assumes proper PCB layout with thermal vias connecting the exposed pad to internal ground planes, enabling effective heat dissipation during repetitive ESD events.
Is ESD761DPYRQ1 qualified for automotive under-hood applications?
Yes, ESD761DPYRQ1 is AEC-Q101 qualified and rated for operation from –55°C to +150°C, making it suitable for under-hood environments including engine control modules, transmission controllers, and radiator fan drivers where ambient temperatures exceed 125°C.
How does the clamping voltage of ESD761DPYRQ1 compare to competing devices at 1.8A?
At 1.8A (8/20µs waveform), ESD761DPYRQ1 clamps to 36.3V - lower than ESD751DYARQ1 (36.5V at 2.8A) and significantly lower than many generic 24V TVS diodes exceeding 40V. This tight clamping ensures compatibility with LIN transceivers having 36V absolute maximum ratings, reducing risk of damage during surge events.
ESD761DPYRQ1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Package/Case:
- 0402 (1006 Metric)
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 24V (Max)
- Voltage - Breakdown (Min):
- 35.5V
- Voltage - Clamping (Max) @ Ipp:
- 36.3V (Typ)
- Current - Peak Pulse (10/1000µs):
- 1.8A (8/20µs)
- Power - Peak Pulse:
- 65W
- Power Line Protection:
- No
- Applications:
- CAN
- Capacitance @ Frequency:
- 1.1pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 2-X1SON (1x.60)
ESD761DPYRQ1 FAQ
1.How can I place an order for ESD761DPYRQ1 through Aetrix?
Please submit a Request for Quotation (RFQ) for ESD761DPYRQ1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ESD761DPYRQ1 reliable?
The price and inventory of ESD761DPYRQ1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ESD761DPYRQ1 is usually 5 days.
3.What payment methods are accepted for ESD761DPYRQ1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ESD761DPYRQ1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ESD761DPYRQ1?
ESD761DPYRQ1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ESD761DPYRQ1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ESD761DPYRQ1?
For technical support, including ESD761DPYRQ1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ESD761DPYRQ1 requirements.
6.How does Aetrix verify that ESD761DPYRQ1 is sourced from the original manufacturer or authorized distributors?
All ESD761DPYRQ1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ESD761DPYRQ1 meets industry standards.
7.What is the process for return or replacement of ESD761DPYRQ1?
All ESD761DPYRQ1 units undergo pre-shipment inspection (PSI). If there is an issue with ESD761DPYRQ1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ESD761DPYRQ1 part is unused and in its original packaging.
Return procedure for ESD761DPYRQ1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ESD761DPYRQ1 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
