My Inquiry
My Account
STMicroelectronics ESDA14V2SC6Y
- Part No.:
- ESDA14V2SC6Y
- Manufacturer:
- STMicroelectronics
- Category:
- TVS Diodes
- Package:
- SOT-23-6
- Datasheet:
-
ESDA14V2SC6Y.pdf
- Description:
- TVS DIODE 12VWM 35VC SOT23-6
- Quantity:
- Payment:
- Shipping:
Inventory:4,837
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ESDA14V2SC6Y from STMicroelectronics is an automotive-grade quad unidirectional Transil™ TVS diode array for ESD and EOS transient voltage suppression on data and signal lines. It features 14.2 V minimum breakdown voltage, 400 W peak pulse power (8/20 µs), 14 A peak pulse current, ±30 kV ESD immunity per ISO 10605, and AEC-Q101 qualification-designed for protecting CAN, LIN, and sensor interface lines in vehicle infotainment and body control modules.
For engineers reviewing the ESDA14V2SC6Y datasheet, ESDA14V2SC6Y pinout, ESDA14V2SC6Y application, or ESDA14V2SC6Y equivalent, key selection criteria include clamping voltage at rated IPP, line capacitance (100 pF typ.), junction temperature range (–40 °C to +150 °C), and SOT23-6L package compatibility with high-density automotive PCB layouts.
Technical Context
The ESDA14V2SC6Y integrates four independent unidirectional TVS elements in a single monolithic silicon chip, each clamping positive transients just above VCC and negative transients to ~0.7 V below ground. Its architecture enables simultaneous protection of four bidirectional signal paths without internal coupling.
It meets stringent automotive transient immunity standards: ISO 7637-2 Pulse 1 (–100 V), Pulse 2a (+50 V), Pulse 3a (–150 V), and Pulse 3b (+100 V), with clamping voltage ≤12 V at 14 A (8/20 µs) and leakage current <5 µA at 14.2 V.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Breakdown Voltage VBR | 14.2 V min / 15.8 V max - defines minimum trigger threshold for transient clamping |
| Clamping Voltage VCL | 12 V max at 14 A (8/20 µs) - ensures protected ICs see safe voltage during surge events |
| Peak Pulse Power | 400 W (8/20 µs) - sustains high-energy transients common in 12 V automotive systems |
| Line Capacitance CLINE | 100 pF typ. - low enough to avoid signal integrity degradation on 1–5 Mbps CAN/LIN buses |
| ESD Withstand Level | ±30 kV contact & air discharge (ISO 10605, 150/330 pF) - exceeds automotive ESD test requirements |
| Junction Temp Range | –40 °C to +150 °C - supports operation under hood and near engine control units |
| AEC-Q101 Qualified | Yes - validated for automotive reliability including HTOL, TC, and ESD stress testing |
Pinout & Package
ESDA14V2SC6Y is housed in a lead-free, RoHS-compliant SOT23-6L package (3.05 × 1.75 × 1.30 mm), optimized for automated placement and reflow soldering per JEDEC J-STD-020.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Anode 1 | Input terminal for first unidirectional TVS path (cathode tied internally to VCC) |
| 2 | Cathode 1 | Clamp output node for Channel 1 - connects to protected signal line |
| 3 | Anode 2 | Input terminal for second unidirectional TVS path |
| 4 | Cathode 2 | Clamp output node for Channel 2 |
| 5 | Anode 3 | Input terminal for third unidirectional TVS path |
| 6 | Cathode 3 | Clamp output node for Channel 3 - pin 6 is not used for Channel 4; fourth channel shares cathode with pin 2 or uses dedicated layout per Figure 1 in datasheet |
Key Features
| Feature | Design Value |
|---|---|
| Quad unidirectional protection | Four independent TVS elements enable discrete-level surge suppression on four signal lines without shared clamping nodes |
| Low clamping voltage | VCL ≤12 V at 14 A ensures downstream logic ICs (e.g., CAN transceivers) remain within absolute maximum ratings |
| Automotive-grade reliability | AEC-Q101 qualification confirms suitability for safety-critical vehicle subsystems with zero infant mortality |
| Low line capacitance | 100 pF typical minimizes signal rise-time distortion on high-speed serial links up to 5 Mbps |
| Thermal robustness | Rated for continuous operation up to +150 °C junction temperature - compatible with under-hood thermal environments |
Applications
| Infotainment Data Lines | CAN Bus Interface |
|---|---|
Use Scenario: Protecting USB, HDMI, or LVDS interfaces in head units and display modules against ESD during service or user interaction. IC Role / Device Role: Unidirectional TVS array clamping transients between signal line and local VCC/GND rails. Use Value: Prevents latch-up or permanent damage to high-speed SerDes ICs while maintaining <100 pF loading for signal integrity. | Use Scenario: Shielding CAN_H/CAN_L differential pairs in body control modules from load dump and inductive switching noise. IC Role / Device Role: Four-channel TVS providing independent clamping for both lines plus auxiliary signals (e.g., wake-up line). Use Value: Meets ISO 7637-2 Pulse 1/2a/3a/3b immunity requirements without adding external bias networks. |
| LIN Network Nodes | Sensor Signal Conditioning |
Use Scenario: Securing LIN slave nodes (e.g., door lock actuators, mirror controls) against ESD during assembly and field operation. IC Role / Device Role: Single-device protection for LIN bus line and associated diagnostic or power-enable pins. Use Value: Enables compact 6-pin footprint for full 3-line protection (bus + two control lines), reducing BOM count vs. discrete diodes. | Use Scenario: Safeguarding analog outputs of pressure, temperature, or position sensors connected to MCU ADC inputs. IC Role / Device Role: Low-leakage (<5 µA) TVS array preventing overvoltage-induced offset drift or input stage damage. Use Value: Maintains measurement accuracy by limiting clamping voltage to ≤12 V while supporting –40 °C to +150 °C ambient operation. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar TVS diode array applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESDA14V2SC5Y | Same electrical specs but SOT23-5L package (5-pin, no dedicated GND pin); lower thermal dissipation margin | Used where board space is tighter and only three signal lines require protection | Select when footprint area is constrained and fourth channel is unused; verify thermal derating for sustained surges |
| TPD4E05U06DBVR | Lower VBR (5.5 V), higher CLINE (12 pF), same SOT23-6L - designed for 3.3 V logic, not 12 V automotive | Targeted at consumer USB/USB-C ports, not ISO 7637-2 compliant systems | Only suitable for non-automotive, low-voltage data lines; lacks AEC-Q101 and pulse 1/3a rating |
Compared with ESDA14V2SC6Y, ESDA14V2SC5Y offers identical protection performance in a smaller footprint but reduced thermal margin, while TPD4E05U06DBVR provides lower-capacitance protection for 3.3 V systems but fails automotive surge compliance and high-temperature operation.
Availability
ESDA14V2SC6Y is available at Aetrix Electronics and suitable for automotive infotainment systems, CAN/LIN network nodes, and sensor interface modules requiring stable component supply across extended product lifecycles.
Supply support for ESDA14V2SC6Y includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, delivering intelligent power, sensing, and control solutions for automotive, industrial, and consumer markets.
The ESDAxxSCxY series belongs to ST's automotive-grade Transil™ TVS portfolio, engineered specifically to meet ISO 10605 and ISO 7637-2 immunity requirements in harsh vehicle electrical environments.
FAQ
What is the maximum clamping voltage of ESDA14V2SC6Y at 14 A?
The maximum clamping voltage is 12 V under an 8/20 µs waveform at 14 A peak pulse current, as specified in Table 3 of the official ST datasheet (DocID028400 Rev 1). This value ensures protected components remain within safe operating limits during ESD and load-dump events.
Does ESDA14V2SC6Y support bidirectional signal lines like CAN_H/CAN_L?
No - ESDA14V2SC6Y contains four unidirectional TVS elements. For bidirectional protection on differential lines, two devices are typically used: one for CAN_H-to-VCC/GND and another for CAN_L-to-VCC/GND, or a dedicated bidirectional array such as ESDALYV5-1U2.
Is the SOT23-6L package compatible with standard reflow profiles?
Yes - ST specifies a JEDEC-compliant reflow profile with peak temperature ≤260 °C for 10 seconds (Table 2), and recommends halide-free, "no-clean" solder paste with fine particles (20–45 µm). The device is qualified for IPC/JEDEC J-STD-020 moisture sensitivity level 1.
How does ESDA14V2SC6Y differ from ESDA6V1SC6Y in system-level protection?
ESDA14V2SC6Y has higher VBR (14.2 V vs. 6.1 V) and is intended for 12 V automotive supply domains, whereas ESDA6V1SC6Y targets 3.3–5 V logic interfaces. Using ESDA6V1SC6Y on a 12 V line would cause premature conduction and potential thermal failure due to excessive leakage at normal operating voltage.
ESDA14V2SC6Y Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Package/Case:
- SOT-23-6
- Series:
- ESDA, TRANSIL™
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 4
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 12V
- Voltage - Breakdown (Min):
- 14.2V
- Voltage - Clamping (Max) @ Ipp:
- 35V
- Current - Peak Pulse (10/1000µs):
- 14A
- Power - Peak Pulse:
- 400W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -40°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-23-6
ESDA14V2SC6Y FAQ
1.How can I place an order for ESDA14V2SC6Y through Aetrix?
Please submit a Request for Quotation (RFQ) for ESDA14V2SC6Y on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ESDA14V2SC6Y reliable?
The price and inventory of ESDA14V2SC6Y are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ESDA14V2SC6Y is usually 5 days.
3.What payment methods are accepted for ESDA14V2SC6Y?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ESDA14V2SC6Y transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ESDA14V2SC6Y?
ESDA14V2SC6Y orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ESDA14V2SC6Y order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ESDA14V2SC6Y?
For technical support, including ESDA14V2SC6Y datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ESDA14V2SC6Y requirements.
6.How does Aetrix verify that ESDA14V2SC6Y is sourced from the original manufacturer or authorized distributors?
All ESDA14V2SC6Y products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ESDA14V2SC6Y meets industry standards.
7.What is the process for return or replacement of ESDA14V2SC6Y?
All ESDA14V2SC6Y units undergo pre-shipment inspection (PSI). If there is an issue with ESDA14V2SC6Y, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ESDA14V2SC6Y part is unused and in its original packaging.
Return procedure for ESDA14V2SC6Y:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ESDA14V2SC6Y Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
