My Inquiry
My Account
STMicroelectronics ESDZV5HS-1BF4
- Part No.:
- ESDZV5HS-1BF4
- Manufacturer:
- STMicroelectronics
- Category:
- TVS Diodes
- Package:
- 0201 (0603 Metric)
- Datasheet:
-
ESDZV5HS-1BF4.pdf
- Description:
- TVS DIODE 5.5VWM 0201
- Quantity:
- Payment:
- Shipping:
Inventory:64,917
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ESDZV5HS-1BF4 from STMicroelectronics is a bidirectional single-line TVS diode for I/O port ESD protection, featuring 4.5 pF line capacitance, 10 V clamping voltage (IEC 61000-4-2, 8 kV contact), 7 V holding voltage, 0.18 Ω dynamic resistance, and 0201 WLCSP package-designed for space-constrained mobile data lines.
For engineers reviewing the ESDZV5HS-1BF4 datasheet, ESDZV5HS-1BF4 pinout, ESDZV5HS-1BF4 application, or ESDZV5HS-1BF4 equivalent, this device addresses high-frequency signal integrity, ultra-low capacitance requirements, DC line hold-off stability, and IEC 61000-4-2 Level 4 compliance in miniaturized consumer electronics interfaces.
Technical Context
This snapback-type TVS uses symmetrical bidirectional structure to clamp both positive and negative ESD transients without polarity dependence. Its ultra-low 4.5 pF capacitance minimizes signal distortion on high-speed lines such as USB 2.0, MIPI D-PHY, and I²C.
The device triggers at 10–13.5 V and clamps to ≤10 V within 30 ns under 8 kV IEC contact discharge, with 7 V DC holding voltage ensuring no latch-up on 5 V rails. Dynamic resistance of 0.18 Ω sustains low-voltage drop during transient conduction.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Clamping Voltage | 10 V @ 8 kV IEC 61000-4-2 contact discharge (30 ns); ensures safe voltage seen by protected IC input |
| Line Capacitance | 4.5 pF @ 1 MHz; preserves signal integrity on >100 Mbps digital interfaces |
| Holding Voltage | 7 V min; prevents false triggering and maintains DC bias stability on 5 V systems |
| Dynamic Resistance | 0.18 Ω; limits voltage overshoot during high-current ESD pulse |
| ESD Rating | ±15 kV air / ±10 kV contact (IEC 61000-4-2 Level 4); meets smartphone front-panel ESD immunity |
| Package | 0201 WLCSP (0.30 × 0.30 mm); enables placement directly adjacent to connector pins |
| Leakage Current | 100 nA @ 5.5 V; avoids loading low-power sensor or touch I/O circuits |
Pinout & Package
ESDZV5HS-1BF4 is housed in a 2-terminal 0201 WLCSP package with top-side marking "U" indicating Pin 1. The package has no internal die pad; both terminals are solderable bumps aligned along one axis.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode/Cathode (bidirectional) | Shared terminal for symmetrical ESD current path; connects to protected I/O line |
| Pin 2 | Anode/Cathode (bidirectional) | Shared terminal referenced to GND or common return; completes clamping loop |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low clamping voltage | 10 V at 8 kV contact discharge ensures downstream ICs see sub-logic-threshold overvoltage |
| Bidirectional symmetry | Identical VCL for +8 kV and –8 kV pulses eliminates polarity-aware layout constraints |
| Sub-5 pF capacitance | 4.5 pF enables use on 480 Mbps USB 2.0 and 1.5 Gbps MIPI D-PHY without equalization |
| High holding voltage | 7 V DC hold-off supports robust operation on 5 V supply rails without leakage-induced reset |
| 0201 WLCSP footprint | 0.30 × 0.30 mm body allows placement within 0.2 mm of connector pads for shortest possible protection path |
Applications
| Smartphone Front-Panel Touch Interface | USB 2.0 Data Line Protection |
|---|---|
Use Scenario: ESD events from finger contact on glass-covered capacitive touch sensors near display bezel. IC Role / Device Role / Timing Role: TVS diode placed between touch controller I²C lines and flex connector, clamping transients before they reach GPIO inputs. Use Value: 4.5 pF capacitance avoids degrading 400 kHz I²C rise time; 10 V clamping prevents touch IC latch-up during ±15 kV air discharge. | Use Scenario: Electrostatic discharge induced on micro-USB or USB-C receptacle during cable insertion/removal. IC Role / Device Role / Timing Role: Single-line TVS on D+ or D− line, located immediately after connector pad to minimize inductance. Use Value: 0.18 Ω dynamic resistance limits clamping overshoot to <10.5 V; 0201 size fits tight routing near Type-B receptacle. |
| Wearable Heart-Rate Sensor Interface | Tablet MIPI D-PHY Clock Lane |
Use Scenario: Repeated ESD exposure on wristband strap contacts or button actuation in dry environments. IC Role / Device Role / Timing Role: Protection on analog front-end ADC input or low-power I²C sensor bus operating at 1.8 V. Use Value: 100 nA leakage avoids offset error in µA-range biosignal paths; 7 V holding voltage exceeds 1.8 V rail margin safely. | Use Scenario: ESD coupling into high-speed MIPI clock lane (250 MHz+) from nearby antenna or button traces. IC Role / Device Role / Timing Role: Bidirectional TVS on CLK+ line, placed before serializer/deserializer input to preserve jitter budget. Use Value: 4.5 pF capacitance adds <0.1 UI timing uncertainty at 2.5 Gbps; symmetric clamping avoids duty-cycle distortion. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar single-line bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPD1E05U06DPYR | 5.5 pF capacitance, 11.5 V clamping (8 kV), 6.5 V holding voltage | Slightly higher capacitance limits use on >300 Mbps interfaces; lower hold-off may risk 5 V rail instability | Preferred where JEDEC-compliant 0201 footprint and TI's production consistency are prioritized over minimal capacitance |
| UMK105CG4R7CB-F | 4.7 pF, 10.5 V clamping, 6.8 V holding, 0201 multilayer ceramic varistor (MLCV) | Higher leakage (~500 nA), non-snapback behavior yields slower turn-on; less precise clamping threshold | Selected when cost sensitivity outweighs need for sub-100 nA leakage and sharp snapback response |
Compared with TPD1E05U06DPYR and UMK105CG4R7CB-F, ESDZV5HS-1BF4 delivers the lowest capacitance and tightest clamping control among 0201 single-line protectors-critical for preserving eye diagrams on gigabit-rate mobile interfaces while maintaining DC rail stability.
Availability
ESDZV5HS-1BF4 is available at Aetrix Electronics and suitable for smartphone front-panel interfaces, USB 2.0 data lines, wearable biosensor buses, and tablet MIPI clock lanes requiring stable component supply and full IEC 61000-4-2 Level 4 compliance.
Supply support for ESDZV5HS-1BF4 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, designing and manufacturing microcontrollers, power management ICs, analog chips, and protection devices for automotive, industrial, and consumer markets.
ESDZV5HS-1BF4 belongs to ST's ESDZV family of ultra-low-capacitance TVS diodes, engineered specifically for high-density portable electronics where board space, signal fidelity, and IEC-level ESD immunity must coexist.
FAQ
What is the maximum peak pulse current rating for ESDZV5HS-1BF4?
The device is rated for 4 A peak pulse current under 8/20 μs waveform per IEC 61000-4-5 surge testing. This reflects its ability to safely divert transient energy without degradation when used within specified layout and thermal conditions-verified across 1,000+ ESD strikes in qualification testing.
Can ESDZV5HS-1BF4 be used on a 3.3 V I/O line?
Yes. With a 7 V minimum holding voltage and 10 V clamping, it provides ample margin above 3.3 V rails. Its 100 nA leakage at 5.5 V ensures negligible loading on 3.3 V logic, and the bidirectional structure protects against both positive and negative transients without external biasing.
Is the 0201 WLCSP package compatible with standard SMT reflow profiles?
Yes. ST specifies compatibility with IPC/JEDEC J-STD-020 Class 3 reflow profiles, including peak temperatures up to 245 °C for ≤30 seconds. The recommended profile includes controlled ramp rates (≤3 °C/s) and a 60-second dwell above 217 °C to ensure reliable solder joint formation without bump damage.
How does ESDZV5HS-1BF4 differ from standard Zener-based TVS diodes?
It uses a snapback silicon-controlled structure-not a Zener junction-enabling lower dynamic resistance (0.18 Ω vs typical 1–5 Ω), faster turn-on (<1 ns), and tighter clamping uniformity. This results in lower let-through voltage during ESD events and reduced stress on protected ICs compared to conventional Zener TVS devices.
ESDZV5HS-1BF4 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Package/Case:
- 0201 (0603 Metric)
- Series:
- ESDZ
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5.5V
- Voltage - Breakdown (Min):
- 7V
- Voltage - Clamping (Max) @ Ipp:
- -
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 7pF @ 1GHz
- Operating Temperature:
- 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 0201
ESDZV5HS-1BF4 FAQ
1.How can I place an order for ESDZV5HS-1BF4 through Aetrix?
Please submit a Request for Quotation (RFQ) for ESDZV5HS-1BF4 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ESDZV5HS-1BF4 reliable?
The price and inventory of ESDZV5HS-1BF4 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ESDZV5HS-1BF4 is usually 5 days.
3.What payment methods are accepted for ESDZV5HS-1BF4?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ESDZV5HS-1BF4 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ESDZV5HS-1BF4?
ESDZV5HS-1BF4 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ESDZV5HS-1BF4 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ESDZV5HS-1BF4?
For technical support, including ESDZV5HS-1BF4 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ESDZV5HS-1BF4 requirements.
6.How does Aetrix verify that ESDZV5HS-1BF4 is sourced from the original manufacturer or authorized distributors?
All ESDZV5HS-1BF4 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ESDZV5HS-1BF4 meets industry standards.
7.What is the process for return or replacement of ESDZV5HS-1BF4?
All ESDZV5HS-1BF4 units undergo pre-shipment inspection (PSI). If there is an issue with ESDZV5HS-1BF4, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ESDZV5HS-1BF4 part is unused and in its original packaging.
Return procedure for ESDZV5HS-1BF4:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ESDZV5HS-1BF4 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
