My Inquiry
My Account
STMicroelectronics HSP061-2M6
- Part No.:
- HSP061-2M6
- Manufacturer:
- STMicroelectronics
- Category:
- TVS Diodes
- Package:
- 6-UFDFN
- Datasheet:
-
HSP061-2M6.pdf
- Description:
- TVS DIODE 3VWM 6UQFN
- Quantity:
- Payment:
- Shipping:
Inventory:7,341
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
HSP061-2M6 from STMicroelectronics is a 6-pin QFN ESD protection array for high-speed differential interfaces, featuring 0.6 pF typical I/O-to-GND capacitance, 5.5 GHz -3 dB cutoff frequency, ±8 kV contact/±15 kV air IEC 61000-4-2 ESD rating, and operation from –40 °C to +150 °C junction temperature. It enables signal-integrity-critical HDMI 1.4, USB3.0, and DisplayPort line protection without skew degradation.
For engineers reviewing the HSP061-2M6 datasheet, HSP061-2M6 pinout, HSP061-2M6 application, or HSP061-2M6 equivalent, key selection criteria include ultra-low capacitance variation (≤0.13 pF), flow-through routing architecture, dual-line differential port configuration, and QFN-6L package compatibility with high-density PCB layouts.
Technical Context
The HSP061-2M6 integrates two matched bidirectional ESD diode pairs in a single QFN-6L package, each pair protecting one differential lane (e.g., TX+/TX– or RX+/RX–). Its flow-through routing minimizes trace discontinuity, preserving impedance continuity across 5.5 GHz bandwidth.
Electrical behavior is defined by 3 V stand-off voltage (VRM), 6 V minimum breakdown (VBR @ 1 mA), 18 V clamping voltage (VCL at +8 kV contact discharge), and <100 nA leakage at VRM - enabling low-power, noise-sensitive high-speed serial links.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Cut-off frequency | 5.5 GHz - ensures minimal insertion loss up to HDMI 1.4 (3.4 Gbps) and USB3.0 (5 Gbps) data rates |
| I/O-to-GND capacitance | 0.6 pF typ. - maintains signal integrity on >5 Gbps differential lanes with negligible timing skew |
| Capacitance variation | ≤0.13 pF (200–3000 MHz) - guarantees consistent impedance matching across full operating band |
| ESD rating (IEC 61000-4-2) | ±8 kV contact / ±15 kV air - exceeds Level 4 immunity for industrial and consumer interface ports |
| Operating junction temp. | –40 °C to +150 °C - supports under-hood automotive, industrial HMI, and high-power density PCBs |
| Stand-off voltage | 3 V - compatible with 3.3 V and lower-voltage high-speed I/O rails without false triggering |
Pinout & Package
HSP061-2M6 is housed in a 1.45 mm × 1.00 mm × 0.55 mm QFN-6L package with exposed thermal pad, RoHS-compliant and halogen-free construction per ECOPACK® specifications.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | I/O1+ | Differential positive input for first protected lane (e.g., HDMI TMDS+) |
| 2 | GND | Signal reference and ESD current return path - must connect to solid ground plane |
| 3 | I/O1− | Differential negative input for first protected lane (e.g., HDMI TMDS−) |
| 4 | I/O2+ | Differential positive input for second protected lane (e.g., USB3.0 TX+) |
| 5 | GND | Shared ground terminal - electrically tied to Pin 2 internally |
| 6 | I/O2− | Differential negative input for second protected lane (e.g., USB3.0 TX−) |
Key Features
| Feature | Design Value |
|---|---|
| Flow-through routing | Minimizes trace stubs and impedance discontinuities - critical for maintaining eye diagram integrity at 3.4+ Gbps |
| Ultra-low capacitance variation | ≤0.13 pF over 200–3000 MHz - prevents differential skew between complementary signals |
| High ESD robustness | Clamps to ≤18 V at +8 kV contact discharge - protects downstream PHY without latch-up risk |
| Thermal resilience | Rated for 150 °C junction temperature - supports placement near power stages or in sealed enclosures |
Applications
| HDMI 1.4 Interface Protection | USB3.0 Host Port Protection |
|---|---|
|
Use Scenario: Protecting HDMI 1.4 source outputs (GPU, SoC) against ESD during cable hot-plug events in AV receivers and monitors. IC Role / Device Role / Timing Role: Dual-lane ESD clamp placed directly at HDMI connector, preserving 3.4 Gbps TMDS signal integrity via flow-through layout. Use Value: Enables compliance with HDMI CTS 1.4a eye mask requirements while passing ±15 kV air discharge per IEC 61000-4-2. |
Use Scenario: Safeguarding USB3.0 SuperSpeed differential pairs on laptop docking stations and external SSD enclosures. IC Role / Device Role / Timing Role: Low-capacitance transient suppressor on TX/RX lanes, positioned between connector and USB3.0 controller PHY. Use Value: Maintains <0.3 UI jitter increase at 5 Gbps and prevents PHY damage during field ESD events. |
| DisplayPort 1.2 Source Protection | Industrial HMI Video Link Protection |
|
Use Scenario: Securing DisplayPort 1.2 source outputs in medical imaging displays and digital signage controllers. IC Role / Device Role / Timing Role: Dual-channel ESD array protecting main link lanes (AUX and HPD lines handled separately). Use Value: Delivers <0.6 dB insertion loss at 3 GHz and meets DP 1.2a electrical compliance for 5.4 Gbps operation. |
Use Scenario: Hardening video interface lines in factory-floor HMIs exposed to frequent operator touch and static-prone environments. IC Role / Device Role / Timing Role: Robust ESD guard for LVDS or embedded DisplayPort links in panel-mounted controllers. Use Value: Sustains operation at 150 °C ambient and survives repeated ±8 kV contact discharges without parameter drift. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-speed differential ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPD2E001DRYR | 0.8 pF capacitance, 3.5 GHz bandwidth, SOT-5X3 package (5-pin) | Single-lane protection only; requires two devices for dual-lane use | Prefer when board space allows discrete lane protection and cost sensitivity outweighs integration benefit |
| SZ1.8T1G | 1.8 V standoff, 0.9 pF, 2.5 GHz bandwidth, SOD-523 package | Lower voltage rating limits use to 1.8 V I/O systems; unsuitable for 3.3 V HDMI/USB3.0 | Select only for low-voltage embedded display interfaces where 3 V operation is not required |
Compared with TPD2E001DRYR and SZ1.8T1G, HSP061-2M6 uniquely delivers dual-lane protection in one QFN-6L footprint with 5.5 GHz bandwidth and 3 V standoff - making it optimal for space-constrained, multi-gigabit consumer and industrial video interfaces.
Availability
HSP061-2M6 is available at Aetrix Electronics and suitable for HDMI 1.4, USB3.0, and DisplayPort 1.2 interface designs requiring stable component supply, long-term lifecycle support, and RoHS/halogen-free compliance.
Supply support for HSP061-2M6 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, microcontroller, power, and sensor solutions for automotive, industrial, and consumer markets.
HSP061-2M6 belongs to ST's high-speed ESD protection portfolio, engineered specifically for preserving signal fidelity on >3 Gbps differential serial links while delivering industrial-grade ESD immunity.
FAQ
What is the recommended PCB layout for HSP061-2M6 to preserve signal integrity?
Place HSP061-2M6 within 3 mm of the protected connector with symmetric, length-matched differential traces. Use a solid ground plane beneath the device and connect the exposed thermal pad to ground with ≥4 thermal vias. Avoid stubs or right-angle bends in I/O routing to maintain 100 Ω differential impedance.
Does HSP061-2M6 require external biasing or control signals?
No. HSP061-2M6 is a passive, bidirectional ESD protection array with no enable pins, supply rails, or configuration requirements. It operates automatically during transient events and presents only 0.6 pF capacitive load during normal operation - eliminating design overhead.
Can HSP061-2M6 be used on single-ended high-speed lines like PCIe or SATA?
No. HSP061-2M6 is optimized for differential signaling with matched I/O pairs (I/O1+/I/O1− and I/O2+/I/O2−). Single-ended applications require asymmetric protection devices such as the HSP061-4M5 (4-channel) or standalone unidirectional TVS arrays with appropriate capacitance and clamping specs.
How does HSP061-2M6 perform under repeated ESD stress?
Per STMicroelectronics qualification testing, HSP061-2M6 maintains specification compliance after ≥1000 cycles of ±8 kV contact discharge. Its silicon-avalanche structure exhibits no parametric shift in VBR, CI/O, or leakage current - ensuring long-term reliability in high-touch interface applications.
HSP061-2M6 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Package/Case:
- 6-UFDFN
- Series:
- HSP
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Steering (Rail to Rail)
- Unidirectional Channels:
- 2
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 3V
- Voltage - Breakdown (Min):
- 6V
- Voltage - Clamping (Max) @ Ipp:
- -
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- Yes
- Applications:
- Ethernet, HDMI
- Capacitance @ Frequency:
- 0.6pF @ 200MHz ~ 3GHz
- Operating Temperature:
- -40°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-uQFN (1.45x1)
HSP061-2M6 FAQ
1.How can I place an order for HSP061-2M6 through Aetrix?
Please submit a Request for Quotation (RFQ) for HSP061-2M6 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for HSP061-2M6 reliable?
The price and inventory of HSP061-2M6 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for HSP061-2M6 is usually 5 days.
3.What payment methods are accepted for HSP061-2M6?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for HSP061-2M6 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for HSP061-2M6?
HSP061-2M6 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your HSP061-2M6 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for HSP061-2M6?
For technical support, including HSP061-2M6 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your HSP061-2M6 requirements.
6.How does Aetrix verify that HSP061-2M6 is sourced from the original manufacturer or authorized distributors?
All HSP061-2M6 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that HSP061-2M6 meets industry standards.
7.What is the process for return or replacement of HSP061-2M6?
All HSP061-2M6 units undergo pre-shipment inspection (PSI). If there is an issue with HSP061-2M6, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The HSP061-2M6 part is unused and in its original packaging.
Return procedure for HSP061-2M6:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
HSP061-2M6 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
