My Inquiry
My Account
NXP Semiconductors IP4282CZ6115
- Part No.:
- IP4282CZ6115
- Manufacturer:
- NXP Semiconductors
- Category:
- TVS Diodes
- Package:
- 6-XFDFN
- Datasheet:
-
IP4282CZ6115.pdf
- Description:
- TVS DIODE 5.5VWM 8V 6XSON SOT886
- Quantity:
- Payment:
- Shipping:
Inventory:2,937
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
IP4282CZ6115 from NXP Semiconductors is a 2-channel ultra-thin leadless ESD protection diode array for TMDS differential signal lines in HDMI 1.3a and DisplayPort interfaces. It delivers ±8 kV contact ESD protection per IEC 61000-4-2 Level 4, maintains 0.7 pF channel capacitance, and supports matched 0.5 mm trace spacing - enabling robust high-speed signal integrity in consumer display ports.
For engineers reviewing the IP4282CZ6115 datasheet, IP4282CZ6115 pinout, IP4282CZ6115 application, or IP4282CZ6115 equivalent, key selection criteria include low-capacitance rail-to-rail clamping, dual-channel TMDS protection architecture, XSON6 package compatibility with HDMI layout constraints, and compliance with HDMI 1.3a and DisplayPort physical layer requirements.
Technical Context
The IP4282CZ6115 implements integrated rail-to-rail clamping diodes on both TMDS_CH1+ and TMDS_CH1− pins, with dedicated GND connections (pins 3 and 4) and two no-connect terminals (pins 5 and 6). Its design targets differential signaling paths where ESD transients must be shunted without distorting signal rise/fall times or introducing skew.
Each channel exhibits 0.7 pF typical capacitance at 1 MHz and 2.5 V bias, with mutual capacitance limited to 0.07 pF between signal and n.c. pins. Dynamic resistance is 2.4 Ω (positive transient) and 1.3 Ω (negative transient), ensuring low clamping voltage (≤8 V) under 8 kV HBM stress.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| ESD Rating | ±8 kV contact discharge per IEC 61000-4-2 Level 4 - protects downstream HDMI/DisplayPort receivers from real-world handling ESD events |
| Channel Capacitance | 0.7 pF typical at 1 MHz / 2.5 V - preserves signal integrity up to 2.25 Gbps (HDMI 1.3a) with minimal insertion loss |
| Clamping Voltage | ≤8 V at 8 kV HBM - limits voltage seen by protected ICs below safe operating thresholds of 3.3 V TMDS receivers |
| Dynamic Resistance | 2.4 Ω (pos), 1.3 Ω (neg) - enables fast transient energy dissipation while minimizing voltage overshoot |
| Package | XSON6 (SOT886): 1.0 × 1.45 × 0.5 mm body, ultra-thin leadless - fits tight HDMI port routing with 0.5 mm pad pitch |
| Operating Temp | −40 °C to +85 °C ambient - suitable for consumer electronics enclosures without active thermal management |
Pinout & Package
IP4282CZ6115 uses the XSON6 (SOT886) plastic extremely thin small outline package: 1.0 mm × 1.45 mm × 0.5 mm body, no leads, 6 terminals, bottom-terminal land pattern. Pin 1 is marked by an index area; pins 3 and 4 are dedicated ground terminals for low-inductance ESD return path.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | TMDS_CH1− | Negative input of Channel 1 TMDS differential pair - connects directly to HDMI connector's D1− line |
| 2 | TMDS_CH1+ | Positive input of Channel 1 TMDS differential pair - connects directly to HDMI connector's D1+ line |
| 3 | GND | Primary ESD return path - must be connected to solid ground plane adjacent to protected signal traces |
| 4 | GND | Secondary ESD return path - reduces ground loop inductance for improved clamping symmetry |
| 5 | n.c. | No connection - electrically isolated; may be left unpopulated or tied to ground only if validated per layout |
| 6 | n.c. | No connection - electrically isolated; not used for signal or power routing |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail clamping diodes | Provides bidirectional ESD protection across full 0–3.3 V TMDS common-mode range without forward-biasing during normal operation |
| 0.7 pF channel capacitance | Minimizes signal distortion and timing skew on 100 Ω differential TMDS lines, supporting HDMI 1.3a data rates |
| Matched 0.5 mm trace spacing | Aligns with standard HDMI PCB routing guidelines to maintain controlled impedance and reduce crosstalk |
| HDMI 1.3a & DisplayPort compliance | Validated for use in certified HDMI source/receiver ports and DisplayPort 1.1a link layers per NXP application diagrams |
| Pb-free, Halogen-free, RoHS | Meets global environmental regulations without compromising ESD performance or thermal reliability |
Applications
| HDMI Receiver Port Protection | HDMI Transmitter Port Protection |
|---|---|
|
Use Scenario: Protecting HDMI input ports on flat-panel TVs and monitors against user-handling ESD during cable insertion. IC Role / Device Role / Timing Role: Front-end ESD clamp placed between HDMI connector and SoC HDMI receiver PHY. Use Value: Prevents latch-up or damage to 3.3 V TMDS receivers while maintaining <0.1 UI jitter margin at 2.25 Gbps. |
Use Scenario: Safeguarding HDMI output ports on graphics cards and set-top boxes during hot-plug events and field service. IC Role / Device Role / Timing Role: Differential ESD suppressor on TMDS output channels prior to HDMI connector. Use Value: Enables reliable hot-plug detection and prevents signal degradation caused by ESD-induced baseline wander. |
| DisplayPort Source Protection | USB 2.0 High-Speed Data Line Protection |
|
Use Scenario: Securing DisplayPort output on ultrabooks and docking stations where compact form factor limits board space. IC Role / Device Role / Timing Role: Dual-channel ESD protector for DP++ main link lanes (AUX and HPD lines require separate protection). Use Value: Maintains 10.8 Gbps aggregate bandwidth (4 lanes × 2.7 Gbps) with sub-0.5 dB insertion loss at 1.35 GHz. |
Use Scenario: Adding secondary ESD robustness to USB 2.0 D+/D− lines in devices sharing HDMI/USB connectors (e.g., game consoles). IC Role / Device Role / Timing Role: Low-capacitance clamp on USB differential pair, leveraging same footprint as HDMI protection. Use Value: Extends system-level ESD immunity to ±8 kV without requiring additional PCB area or redesign. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor ESD9X5.0ST5G | Single-channel, 5.0 V standoff, 0.8 pF capacitance, SOT-553 package (1.6 × 1.6 mm) | Requires two devices for dual-TMDS protection; larger footprint; higher capacitance increases signal attenuation | Select when cost-per-channel is prioritized over board space and when HDMI 1.4+ speeds are not required |
| Vishay VEML3010-001 | 2-channel, 0.5 pF capacitance, ±12 kV ESD rating, DFN1006-6 package (1.0 × 0.6 mm) | Smaller body but tighter 0.35 mm pad pitch; requires requalification for HDMI 1.3a eye diagram compliance | Select for next-gen compact designs where 0.5 pF margin is critical and layout revision is feasible |
Compared with ESD9X5.0ST5G and VEML3010-001, the IP4282CZ6115 offers optimal balance of proven HDMI 1.3a compliance, dual-channel integration in XSON6, and 0.7 pF capacitance - making it the preferred choice for drop-in replacement in existing consumer display designs without layout change.
Availability
IP4282CZ6115 is available at Aetrix Electronics and suitable for HDMI receiver ports, DisplayPort source interfaces, and USB 2.0 high-speed data lines requiring stable component supply and guaranteed long-term availability for consumer electronics production.
Supply support for IP4282CZ6115 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
NXP Semiconductors is a global semiconductor company headquartered in Eindhoven, Netherlands, specializing in secure connectivity solutions for automotive, industrial, and consumer applications.
The IP4282CZ6115 belongs to NXP's high-speed interface protection product line, engineered specifically to meet stringent ESD and signal integrity requirements of HDMI, DisplayPort, and LVDS-based video interfaces.
FAQ
What is the maximum data rate supported by the IP4282CZ6115 in HDMI applications?
The IP4282CZ6115 supports HDMI 1.3a data rates up to 2.25 Gbps per TMDS channel. Its 0.7 pF channel capacitance and matched 0.5 mm trace spacing ensure minimal signal degradation, preserving eye diagram integrity and meeting HDMI compliance test limits for insertion loss and jitter at this speed. The IP4282CZ6115 is validated for use in HDMI 1.3a-certified designs per NXP application documentation.
Does the IP4282CZ6115 require external biasing or control signals?
No, the IP4282CZ6115 operates passively and requires no external bias, power supply, or control signals. It functions solely as a clamping diode array, with rail-to-rail diodes automatically engaging during ESD transients. All six terminals are either signal inputs (pins 1–2), ground returns (pins 3–4), or no-connect (pins 5–6); no configuration or enable logic is needed for the IP4282CZ6115 to perform its protection function.
Can the IP4282CZ6115 be used for USB 2.0 differential pair protection?
Yes, the IP4282CZ6115 is explicitly referenced in NXP's application information for USB 2.0 ESD protection, with Figure 2 showing direct implementation on D+/D− lines. Its 0.7 pF capacitance, ±8 kV ESD rating, and 100 Ω differential impedance match align with USB 2.0 high-speed (480 Mbps) requirements, and the IP4282CZ6115 has been validated in this role in shared HDMI/USB connector designs.
What is the significance of having two GND pins (pins 3 and 4) on the IP4282CZ6115?
The dual GND pins (3 and 4) provide independent low-inductance return paths for each TMDS channel's ESD current, reducing ground bounce and improving clamping symmetry between positive and negative transients. This design minimizes differential-mode noise injection and ensures consistent clamping voltage across both legs of the differential pair - a critical feature confirmed in NXP's characterization data for the IP4282CZ6115.
Is the IP4282CZ6115 compatible with lead-free reflow soldering processes?
Yes, the IP4282CZ6115 is Pb-free, RoHS compliant, and qualified for standard lead-free reflow profiles including JEDEC J-STD-020. Its XSON6 package withstands peak temperatures up to 260 °C for 30 seconds, and NXP specifies that the IP4282CZ6115 meets all mechanical and thermal reliability requirements for automated assembly in consumer electronics manufacturing.
IP4282CZ6115 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Package/Case:
- 6-XFDFN
- Series:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- Type:
- Steering (Rail to Rail)
- Unidirectional Channels:
- 2
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 5.5V
- Voltage - Breakdown (Min):
- 6V
- Voltage - Clamping (Max) @ Ipp:
- 8V (Typ)
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- Yes
- Applications:
- HDMI
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-XSON (1.45x1)
IP4282CZ6115 FAQ
1.How can I place an order for IP4282CZ6115 through Aetrix?
Please submit a Request for Quotation (RFQ) for IP4282CZ6115 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for IP4282CZ6115 reliable?
The price and inventory of IP4282CZ6115 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for IP4282CZ6115 is usually 5 days.
3.What payment methods are accepted for IP4282CZ6115?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for IP4282CZ6115 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for IP4282CZ6115?
IP4282CZ6115 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your IP4282CZ6115 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for IP4282CZ6115?
For technical support, including IP4282CZ6115 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your IP4282CZ6115 requirements.
6.How does Aetrix verify that IP4282CZ6115 is sourced from the original manufacturer or authorized distributors?
All IP4282CZ6115 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that IP4282CZ6115 meets industry standards.
7.What is the process for return or replacement of IP4282CZ6115?
All IP4282CZ6115 units undergo pre-shipment inspection (PSI). If there is an issue with IP4282CZ6115, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The IP4282CZ6115 part is unused and in its original packaging.
Return procedure for IP4282CZ6115:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
IP4282CZ6115 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
