Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Home > Products > Discrete Semiconductor Products > Transistors > FETs, MOSFETs > FETs, MOSFETs

Infineon Technologies IPD90N06S405ATMA2

Name: IPD90N06S405ATMA2
Brand: Infineon Technologies
SKU: IPD90N06S405ATMA2
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Compare

Part No.:: IPD90N06S405ATMA2

Manufacturer:: Infineon Technologies

Category:: FETs, MOSFETs

Package:: TO-252-3, DPAK (2 Leads + Tab), SC-63

Datasheet:: IPD90N06S405ATMA2.pdf

Description:: MOSFET N-CH 60V 90A TO252-31

Quantity:: RFQ Add To RFQ list

Payment:

Shipping:

Inventory:3,395

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Product details

Overview

IPD90N06S405ATMA2 from Infineon Technologies is an AEC-Q101 qualified N-channel enhancement-mode power MOSFET in PG-TO252-3-11 package, rated for 60 V V_DS, 5.1 mΩ R_DS(on) max at 10 V V_GS, and 90 A continuous drain current at T_C = 25 °C. It delivers ultra-low conduction loss in automotive body control modules, DC-DC converters, and high-current motor drivers.

For engineers reviewing the IPD90N06S405ATMA2 datasheet, IPD90N06S405ATMA2 pinout, IPD90N06S405ATMA2 application, or IPD90N06S405ATMA2 equivalent, key selection criteria include its 1.4 K/W R_thJC, 100% avalanche-tested ruggedness, 175 °C operating temperature, and integrated freewheeling diode with 0.95 V V_SD typ. at 90 A.

Technical Context

This OptiMOS®-T2 device uses trench-gate superjunction technology to achieve low R_DS(on) × Q_g figure-of-merit (4.2 mΩ typ. / 81 nC max), enabling high-efficiency switching in 12 V and 24 V automotive systems. Its gate threshold voltage (2.0–4.0 V) ensures robust noise immunity while supporting standard 5 V and 10 V logic-level drive.

The MOSFET integrates a fast-recovery body diode with t_rr = 36 ns and Q_rr = 41 nC, minimizing switching losses during synchronous rectification and freewheeling. Thermal design is supported by MSL1 rating (260 °C peak reflow) and validated junction-to-case thermal resistance of 1.4 K/W under defined PCB mounting conditions.

Key Specifications

Parameter	Value and Actual Design Meaning
V_DS	60 V - Supports 12 V/24 V automotive battery rails with 2× safety margin against load-dump transients.
R_DS(on) max	5.1 mΩ @ V_GS = 10 V, I_D = 90 A - Enables <1 W conduction loss at 90 A, critical for thermally constrained PCB layouts.
I_D cont	90 A @ T_C = 25 °C - Rated for high-current solenoid, pump, and fan drives without external heatsinking.
E_AS	135 mJ @ I_D = 45 A - Confirmed single-pulse avalanche energy supports inductive switching reliability in relay/motor control.
t_r/t_f	5 ns / 8 ns - Fast switching transitions reduce dynamic losses in PWM frequencies up to 100 kHz.
V_GS(th)	2.0–4.0 V - Ensures turn-on stability across temperature and process variation while rejecting typical board noise.
Q_g max	81 nC - Defines gate driver current requirement (~1.6 A avg. for 50 ns rise time); impacts driver IC selection.

Pinout & Package

Package: PG-TO252-3-11 (DPAK), surface-mount, single-drain-tab configuration with exposed thermal pad on leadframe. Mounting requires soldered drain tab to ≥6 cm² copper area per JEDEC JESD51-7 for R_thJA = 40 K/W.

Pin/Terminal	Circuit Role	Design Meaning
Pin 1 (Source)	Source terminal	Low-side reference node; connects to ground plane or current-sense shunt for feedback.
Pin 2 (Gate)	Control input	High-impedance MOSFET gate requiring <100 nA leakage; routed away from noisy traces.
Pin 3 (Drain)	Power output	Exposed metal tab - primary thermal path and high-current return; must be soldered to PCB copper pour.

Key Features

Feature	Design Value
AEC-Q101 qualification	Validated for automotive applications including engine bay and chassis-mounted ECUs with extended temperature cycling and humidity testing.
100% avalanche tested	Each unit undergoes single-pulse E_AS stress test at production - guarantees minimum 135 mJ ruggedness without screening fallout.
175 °C operation	Enables placement near heat sources (e.g., inverters, DC-DC stages) without derating below full current capability.
Green Product (RoHS)	Lead-free and halogen-free construction compliant with EU Directive 2011/65/EU and IPC-1752A Level 2 reporting.
MSL1 rating	Compatible with standard SMT reflow profiles up to 260 °C peak, eliminating moisture sensitivity handling requirements.

Applications

Automotive Body Control Module

12 V DC-DC Buck Converter

Use Scenario: Driving high-power lighting loads (LED headlamps, fog lamps) with PWM dimming and short-circuit protection.

IC Role / Device Role / Timing Role: High-side or low-side switch controlling load current path; operates in hard-switched mode at 1–20 kHz.

Use Value: 5.1 mΩ R_DS(on) limits I²R loss to ≤4.1 W at 90 A, reducing thermal stress on PCB and enabling compact layout.

Use Scenario: Synchronous rectifier in 12 V input → 5 V/3.3 V output buck converter for infotainment power supply.

IC Role / Device Role / Timing Role: Low-side synchronous rectifier; commutates with precise timing relative to high-side FET gate signal.

Use Value: Integrated 0.95 V V_SD and 36 ns t_rr minimize reverse recovery loss, improving efficiency by ~1.2% vs. Schottky solution.

Electric Power Steering (EPS) Motor Driver

Industrial HVAC Blower Control

Use Scenario: Half-bridge leg in three-phase inverter driving 24 V EPS assist motor with regenerative braking.

IC Role / Device Role / Timing Role: Low-side switch in H-bridge topology; handles bidirectional current during PWM and freewheeling phases.

Use Value: 360 A pulsed drain current rating supports peak torque demands; 135 mJ E_AS withstands inductive kickback during fault shutdown.

Use Scenario: On/off and speed-controlled blower in commercial HVAC units using 24 V DC supply and PWM fan interface.

IC Role / Device Role / Timing Role: High-current power switch interfacing microcontroller GPIO via gate driver; operates in linear or switched mode.

Use Value: 90 A continuous rating allows direct drive of >500 W blowers without paralleling; 175 °C rating accommodates enclosed cabinet ambient.

Equivalent & Alternatives

The following parts are listed as comparable options for similar N-channel power MOSFET applications.

Alternative Part	Technical Difference	Application Difference	Selection Advice
STL110N6LF7AG	R_DS(on) = 5.5 mΩ max, 60 V, TO-263-3 package, no AEC-Q101 certification	Lacks automotive qualification; suitable for industrial but not safety-critical vehicle systems	Select if AEC-Q101 is not required and TO-263 thermal performance is preferred
IRF1405ZPBF	R_DS(on) = 5.3 mΩ max, 55 V, TO-220AB package, non-automotive, higher R_thJC (1.7 K/W)	Lower voltage rating and larger through-hole footprint limit use in modern 24 V automotive designs	Choose only for legacy repair or cost-sensitive non-automotive 12 V systems with heatsink availability

Compared with STL110N6LF7AG and IRF1405ZPBF, IPD90N06S405ATMA2 uniquely combines AEC-Q101 compliance, MSL1 reflow rating, 1.4 K/W thermal resistance, and 175 °C operation-making it the only option qualified for under-hood deployment in next-generation automotive ECUs.

Availability

IPD90N06S405ATMA2 is available at Aetrix Electronics and suitable for automotive body control modules, 12 V/24 V DC-DC converters, and electric power steering motor drivers requiring stable component supply across multi-year production cycles.

Supply support for IPD90N06S405ATMA2 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive microcontrollers, and sensor solutions, with global R&D and manufacturing infrastructure.

This device belongs to the OptiMOS®-T2 power transistor product line, engineered specifically for high-current, high-reliability automotive switching applications where low R_DS(on), avalanche ruggedness, and AEC-Q101 compliance are mandatory.

FAQ

What is the maximum allowable gate-source voltage for IPD90N06S405ATMA2?

The absolute maximum V_GS is ±20 V, as specified in the datasheet's "Maximum ratings" table. Operation beyond this risks permanent gate oxide damage. For reliable long-term use, gate drive should be limited to 10–15 V for optimal R_DS(on) and safe margin against transient overshoot.

Does IPD90N06S405ATMA2 include an integrated body diode, and what are its key parameters?

Yes, it features a monolithically integrated fast-recovery body diode. Key parameters include 90 A continuous forward current, 360 A pulsed rating, 0.95 V forward voltage at 90 A and 25 °C, and 36 ns reverse recovery time with 41 nC Q_rr. These values enable efficient freewheeling in half-bridge and synchronous rectifier topologies.

Can IPD90N06S405ATMA2 be used in high-frequency switching applications above 100 kHz?

While its t_r/t_f (5 ns/8 ns) and Q_g (81 nC) support operation up to ~100 kHz, switching losses increase significantly above that due to C_iss (6500 pF max) and C_oss (1600 pF max). For >100 kHz, consider devices with lower capacitance or optimized gate charge, such as OptiMOS™ 5 variants.

Is thermal derating required when mounting IPD90N06S405ATMA2 on a standard FR4 PCB without additional heatsinking?

Yes. With 6 cm² copper cooling area, R_thJA is 40 K/W. At 25 °C ambient, maximum continuous power dissipation is ~107 W - but practical current must be derated to maintain T_j ≤175 °C. For 90 A operation, ensure case temperature stays ≤100 °C via adequate copper area and airflow.

IPD90N06S405ATMA2 Specifications

Product attributes: Attribute value

Manufacturer:: Infineon Technologies

Series:: OptiMOS™

Package/Case:: TO-252-3, DPAK (2 Leads + Tab), SC-63

Packaging:: Tape & Reel (TR)

Product Status:: Active

FET Type:: N-Channel

Technology:: MOSFET (Metal Oxide)

Drain to Source Voltage (Vdss):: 60 V

Current - Continuous Drain (Id) @ 25°C:: 90A (Tc)

Drive Voltage (Max Rds On, Min Rds On):: 10V

Rds On (Max) @ Id, Vgs:: 5.1mOhm @ 90A, 10V

Vgs(th) (Max) @ Id:: 4V @ 60µA

Gate Charge (Qg) (Max) @ Vgs:: 81 nC @ 10 V

Vgs (Max):: ±20V

Input Capacitance (Ciss) (Max) @ Vds:: 6500 pF @ 25 V

FET Feature:: -

Power Dissipation (Max):: 107W (Tc)

Operating Temperature:: -55°C ~ 175°C (TJ)

Grade:: Automotive

Qualification:: AEC-Q101

Mounting Type:: Surface Mount

Supplier Device Package:: PG-TO252-3-11

IPD90N06S405ATMA2 FAQ

1.How can I place an order for IPD90N06S405ATMA2 through Aetrix?

Please submit a Request for Quotation (RFQ) for IPD90N06S405ATMA2 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for IPD90N06S405ATMA2 reliable?

The price and inventory of IPD90N06S405ATMA2 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for IPD90N06S405ATMA2 is usually 5 days.

3.What payment methods are accepted for IPD90N06S405ATMA2?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for IPD90N06S405ATMA2 transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for IPD90N06S405ATMA2?

IPD90N06S405ATMA2 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your IPD90N06S405ATMA2 order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for IPD90N06S405ATMA2?

For technical support, including IPD90N06S405ATMA2 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your IPD90N06S405ATMA2 requirements.

6.How does Aetrix verify that IPD90N06S405ATMA2 is sourced from the original manufacturer or authorized distributors?

All IPD90N06S405ATMA2 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that IPD90N06S405ATMA2 meets industry standards.

7.What is the process for return or replacement of IPD90N06S405ATMA2?

All IPD90N06S405ATMA2 units undergo pre-shipment inspection (PSI). If there is an issue with IPD90N06S405ATMA2, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The IPD90N06S405ATMA2 part is unused and in its original packaging.

Return procedure for IPD90N06S405ATMA2:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

Tech Hub

2026-08-06 Conditional Access Module: CAM, CI/CI+ and DVB Security

Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…

2026-08-03 Electronic Component Obsolescence: EOL Risks, Replacement Options and Last-Time Buy Strategy

Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.

2026-07-29 18650 Battery: Voltage, Capacity, Charging and Pack Design

18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…

2026-07-27 Hall Effect Sensor: Working Principle, Types, Circuits and Applications

Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…

2026-07-20 Product Change Notification (PCN) in Electronic Components: Meaning and Supply Chain Response

Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…

2026-07-19 Blend Door Actuator: Symptoms, Location, Reset and Replacement Guide

A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…

2026-07-17 Raspberry Pi Alternatives: Chip-Level Comparison, Compatibility and Replacement Guide

Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…

2026-07-13 How to Test Dynamic Load Response in Low-Voltage High-Current Buck Converters

Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…

2026-07-08 Output Capacitor Selection for High-Current ASIC Vcore Rails

Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…

2026-07-07 High-Current ASIC Core Power Supply Design: 12-Phase Buck, PMBus and Dynamic Load Response

Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …