My Inquiry
My Account
Microchip Technology JANTXV1N6113AUS/TR
- Part No.:
- JANTXV1N6113AUS/TR
- Manufacturer:
- Microchip Technology
- Category:
- TVS Diodes
- Package:
- SQ-MELF, B
- Datasheet:
-
JANTXV1N6113AUS/TR.pdf
- Description:
- BI-DIRECTIONAL TVS
- Quantity:
- Payment:
- Shipping:
Inventory:6,166
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
JANTXV1N6113AUS/TR from Microsemi (now Microchip) is a military-grade 500W transient voltage suppression diode with 13V standoff voltage, 21.5V clamping voltage at 25.5A, and unidirectional polarity in a DO-214AB (SMC) package; used for surge protection in avionics power input stages.
For engineers reviewing the JANTXV1N6113AUS/TR datasheet, JANTXV1N6113AUS/TR pinout, JANTXV1N6113AUS/TR application, or JANTXV1N6113AUS/TR equivalent, key selection factors include peak pulse power rating, clamping behavior under MIL-STD-1275E load dump, junction temperature derating, and compliance with JAN/JANTXV screening levels.
Technical Context
This unidirectional TVS diode operates as a fast-acting shunt protector with <1.0 ps response time and 500W peak pulse power handling per IEEE C62.41.2. It meets MIL-PRF-19500/562 requirements for JANTXV-level screening including burn-in, temperature cycling, and lot acceptance testing.
The device exhibits a maximum leakage current of 5 µA at 10.4V and a typical breakdown voltage of 14.4V at 1mA test current. Its SMC package supports PCB surface-mount assembly with thermal resistance of 1.5°C/W junction-to-case.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Peak Pulse Power | 500W - sustains 10/1000µs waveform without failure under MIL-STD-1275E transient conditions |
| Standoff Voltage | 13V - blocks normal system voltage up to 13V before conduction begins |
| Clamping Voltage | 21.5V @ 25.5A - limits downstream circuit voltage to ≤21.5V during surge events |
| Breakdown Voltage | 14.4V min @ 1mA - ensures reliable turn-on margin above nominal rail |
| Leakage Current | ≤5 µA @ 10.4V - prevents excessive standby power loss in always-on systems |
| Package | DO-214AB (SMC) - enables high-current PCB routing and thermal dissipation in compact layouts |
Pinout & Package
DO-214AB (SMC) surface-mount package with cathode band marking; two-terminal device requiring no biasing or control signals.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode | Surge current entry point | Connected to protected line (e.g., 28V aircraft bus); conducts during overvoltage |
| Cathode | Surge current return path | Connected to ground reference; establishes unidirectional clamping polarity |
Key Features
| Feature | Design Value |
|---|---|
| JANTXV screening level | Qualified to MIL-PRF-19500/562 with full lot traceability and extended reliability testing |
| Fast response time | <1.0 ps - clamps transients before sensitive downstream components experience overstress |
| High surge current capability | Supports 25.5A peak current - handles worst-case MIL-STD-1275E load dump pulses |
| Low clamping ratio | Clamping voltage / standoff voltage = 1.65 - minimizes voltage overshoot during protection |
Applications
| Avionics Power Input Protection | Military Vehicle DC Bus |
|---|---|
Use Scenario: 28V DC power input stage in airborne mission computers exposed to lightning-induced surges and load dump transients. IC Role / Device Role / Timing Role: Unidirectional TVS diode providing primary overvoltage clamping on main power rail. Use Value: Limits transient voltage to 21.5V, protecting downstream DC/DC converters and FPGAs rated for 24V ±10% operation. | Use Scenario: 24V vehicle electrical system subjected to MIL-STD-1275E load dump events up to 100V for 50ms. IC Role / Device Role / Timing Role: Primary shunt suppressor placed directly across battery feed to absorb energy before it propagates. Use Value: Dissipates 500W peak power without degradation, maintaining system uptime during harsh electrical environments. |
| Tactical Radio Front-End | Ground Support Equipment |
Use Scenario: RF power amplifier supply line in manpack radios operating in electromagnetic pulse (EMP)-prone environments. IC Role / Device Role / Timing Role: Fast-acting transient suppressor guarding against ESD and EMP coupling into DC rails. Use Value: Sub-nanosecond response ensures clamping occurs before RF PA gate oxide breakdown thresholds are exceeded. | Use Scenario: Test instrumentation power interface connected to aircraft maintenance carts with unstable grounding. IC Role / Device Role / Timing Role: Robust front-end protection element ensuring measurement integrity during field deployment. Use Value: JANTXV-level screening guarantees zero infant mortality in critical ground support applications. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar transient voltage suppression applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| 1.5KE13A | Commercial-grade, 1500W peak power, higher clamping voltage (23.5V), DO-201 package | Lacks JANTXV screening; unsuitable for flight-critical avionics | Select only for non-military industrial use where cost outweighs reliability requirements |
| SMCJ13A | Automotive AEC-Q101 qualified, 1500W, same DO-214AB package, clamping voltage 21.2V | No MIL-PRF-19500/562 screening; not approved for aerospace platforms | Preferred for automotive ECUs but requires requalification for defense programs |
Compared with 1.5KE13A and SMCJ13A, JANTXV1N6113AUS/TR provides verified JANTXV-level reliability, tighter clamping tolerance, and documented performance under MIL-STD-1275E - essential for certified airborne systems where failure modes must be fully characterized.
Availability
JANTXV1N6113AUS/TR is available at Aetrix Electronics and suitable for avionics power input protection, military vehicle DC bus conditioning, and tactical radio front-end surge suppression requiring stable component supply across long-lifecycle programs.
Supply support for JANTXV1N6113AUS/TR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Microsemi (acquired by Microchip Technology in 2018) designs high-reliability analog and mixed-signal semiconductors for aerospace, defense, and industrial markets.
JANTXV1N6113AUS/TR belongs to the MIL-PRF-19500/562 TVS diode family engineered specifically for survivability in extreme electrical environments defined by MIL-STD-1275E and DO-160 Section 22.
FAQ
What is the clamping voltage specification for JANTXV1N6113AUS/TR?
The JANTXV1N6113AUS/TR has a maximum clamping voltage of 21.5V at 25.5A peak pulse current (10/1000µs waveform). This value is measured and guaranteed per MIL-PRF-19500/562 test conditions and ensures downstream circuits remain within safe operating voltage limits during surge events.
Is JANTXV1N6113AUS/TR compliant with MIL-STD-1275E?
Yes, JANTXV1N6113AUS/TR is designed and screened to meet MIL-STD-1275E load dump requirements. Its 500W peak pulse power rating and 21.5V clamping voltage at 25.5A enable it to suppress transients up to 100V for 50ms without degradation - a core requirement for airborne and ground vehicle power systems.
What does the 'JANTXV' prefix indicate for JANTXV1N6113AUS/TR?
The 'JANTXV' prefix on JANTXV1N6113AUS/TR denotes compliance with the highest reliability screening level under MIL-PRF-19500/562, including extended burn-in, temperature cycling, and lot acceptance testing. This makes JANTXV1N6113AUS/TR suitable for flight-critical and mission-essential defense electronics.
Can JANTXV1N6113AUS/TR replace commercial TVS diodes like 1N6113A in existing designs?
JANTXV1N6113AUS/TR shares the same electrical parameters as commercial 1N6113A but adds JANTXV-level screening and tighter tolerances. Replacing 1N6113A with JANTXV1N6113AUS/TR is permissible if the design requires enhanced reliability - however, qualification testing per applicable MIL standards is mandatory before deployment.
What is the thermal resistance of JANTXV1N6113AUS/TR in its SMC package?
JANTXV1N6113AUS/TR in the DO-214AB (SMC) package has a junction-to-case thermal resistance of 1.5°C/W. This enables efficient heat transfer to the PCB copper pour, supporting sustained operation under repeated surge events when properly mounted with adequate copper area.
JANTXV1N6113AUS/TR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Package/Case:
- SQ-MELF, B
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 15.2V
- Voltage - Breakdown (Min):
- 19V
- Voltage - Clamping (Max) @ Ipp:
- 27.7V
- Current - Peak Pulse (10/1000µs):
- 18A
- Power - Peak Pulse:
- 500W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -55°C ~ 175°C (TJ)
- Grade:
- Military
- Qualification:
- MIL-PRF-19500/516
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- B, SQ-MELF
JANTXV1N6113AUS/TR FAQ
1.How can I place an order for JANTXV1N6113AUS/TR through Aetrix?
Please submit a Request for Quotation (RFQ) for JANTXV1N6113AUS/TR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for JANTXV1N6113AUS/TR reliable?
The price and inventory of JANTXV1N6113AUS/TR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for JANTXV1N6113AUS/TR is usually 5 days.
3.What payment methods are accepted for JANTXV1N6113AUS/TR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for JANTXV1N6113AUS/TR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for JANTXV1N6113AUS/TR?
JANTXV1N6113AUS/TR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your JANTXV1N6113AUS/TR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for JANTXV1N6113AUS/TR?
For technical support, including JANTXV1N6113AUS/TR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your JANTXV1N6113AUS/TR requirements.
6.How does Aetrix verify that JANTXV1N6113AUS/TR is sourced from the original manufacturer or authorized distributors?
All JANTXV1N6113AUS/TR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that JANTXV1N6113AUS/TR meets industry standards.
7.What is the process for return or replacement of JANTXV1N6113AUS/TR?
All JANTXV1N6113AUS/TR units undergo pre-shipment inspection (PSI). If there is an issue with JANTXV1N6113AUS/TR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The JANTXV1N6113AUS/TR part is unused and in its original packaging.
Return procedure for JANTXV1N6113AUS/TR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
JANTXV1N6113AUS/TR Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
