My Inquiry
My Account
Renesas NNCD6.8PH-T1-A
- Part No.:
- NNCD6.8PH-T1-A
- Manufacturer:
- Renesas
- Category:
- TVS Diodes
- Package:
- 5-VSSOP, SC-70-5, SOT-353
- Datasheet:
-
NNCD6.8PH-T1-A.pdf
- Description:
- NNCD6.8PH-T1-A - LOW CAPACITANCE
- Quantity:
- Payment:
- Shipping:
Inventory:303,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
NNCD6.8PH-T1-A from Renesas Electronics is a low-capacitance, quad-channel ESD protection diode in a 5-pin Super Small Mini Mold package with common-anode configuration. It delivers 30 kV contact ESD immunity per IEC 61000-4-2, 6.2–7.1 V breakdown voltage, 90 pF typical capacitance at 0 V, 2 µA max reverse leakage at 3.5 V, and 40 Ω dynamic impedance - designed for high-density USB, HDMI, and audio interface circuit protection.
For engineers reviewing the NNCD6.8PH-T1-A datasheet, NNCD6.8PH-T1-A pinout, NNCD6.8PH-T1-A application, or NNCD6.8PH-T1-A equivalent, key selection criteria include common-anode quad topology, sub-100 pF signal-line capacitance, 30 kV ESD robustness, thermal derating above 25°C ambient, and compatibility with automated SMT placement in space-constrained consumer electronics layouts.
Technical Context
The NNCD6.8PH-T1-A integrates four identical silicon clamping diodes sharing a single anode terminal (Pin 2), enabling simultaneous bidirectional ESD suppression across four independent signal lines. Each cathode-anode path exhibits sharp 6.8 V nominal breakdown with tight 6.2–7.1 V min/max spread and low dynamic impedance (≤40 Ω) to clamp fast transients below IC damage thresholds.
Its 5-pin Mini Mold package supports high-density PCB layout with 0.65 mm pitch and 2.1 × 2.0 mm footprint. The device operates within −55°C to +150°C storage range and 150°C junction limit, with power dissipation derated linearly above 25°C ambient per Figure 1 in the datasheet.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Breakdown Voltage | 6.2–7.1 V at 5 mA - ensures reliable clamping before downstream logic or PHY ICs exceed absolute maximum ratings |
| Capacitance | 90 pF at 0 V, 1 MHz - low enough for USB 2.0 and audio line integrity without signal distortion |
| ESD Withstand | ≥30 kV contact per IEC 61000-4-2 - exceeds Level 4 industrial immunity requirements |
| Dynamic Impedance | ≤40 Ω at 5 mA - minimizes clamping voltage overshoot during 8/20 µs surge events |
| Reverse Leakage | ≤2 µA at 3.5 V - negligible DC loading on high-impedance sensor or reference lines |
| Package | 5-pin Super Small Mini Mold (2.1 × 2.0 × 0.9 mm) - enables 0.65 mm pitch routing and automated reflow assembly |
Pinout & Package
Package: 5-pin Super Small Mini Mold (SOT-111B variant), 2.1 mm × 2.0 mm × 0.9 mm body, 0.65 mm lead pitch, gull-wing leads.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (K1) | Cathode 1 | ESD clamp path for Signal Line 1; connects to protected I/O trace |
| 2 (A) | Common Anode | Shared anode node tied to VCC or ground via external RC network; defines clamping polarity |
| 3 (K2) | Cathode 2 | ESD clamp path for Signal Line 2; electrically isolated from K1/K3/K4 |
| 4 (K3) | Cathode 3 | ESD clamp path for Signal Line 3; independent conduction path with matched VBR |
| 5 (K4) | Cathode 4 | ESD clamp path for Signal Line 4; enables four-line protection in single 2.1 × 2.0 mm footprint |
Key Features
| Feature | Design Value |
|---|---|
| Quad Common-Anode Topology | Four independent ESD paths share one anode terminal (Pin 2), reducing PCB routing complexity and component count vs. discrete diodes |
| Low 90 pF Capacitance | Preserves signal integrity on high-speed interfaces (e.g., USB D+/D−, HDMI TMDS) without added jitter or rise-time degradation |
| 30 kV Contact ESD Rating | Meets and exceeds IEC 61000-4-2 Level 4 (±8 kV contact / ±15 kV air) for robust field reliability |
| Mini Mold Package | 2.1 × 2.0 mm footprint supports >10k units/hr pick-and-place throughput and eliminates manual soldering in production |
Applications
| USB 2.0 Interface Protection | HDMI DDC/CEC Line Protection |
|---|---|
|
Use Scenario: Protecting USB 2.0 data lines (D+, D−) and VBUS against ESD events during hot-plug insertion in portable docking stations. IC Role / Device Role / Timing Role: Low-capacitance bidirectional clamping diode array placed directly at connector entry point. Use Value: 90 pF capacitance avoids USB 2.0 eye diagram closure; 30 kV rating prevents latch-up or gate oxide rupture in connected SoCs. |
Use Scenario: Shielding HDMI DDC (I²C) and CEC control lines from ESD in AV receivers and set-top boxes exposed to user handling. IC Role / Device Role / Timing Role: Quad-channel ESD suppressor with shared anode tied to 3.3 V rail, clamping both positive and negative transients. Use Value: Matched 6.2–7.1 V breakdown across all four channels ensures uniform protection without skew-induced timing errors on I²C clock/data. |
| Smartphone Audio Jack Protection | Industrial Sensor Interface Protection |
|
Use Scenario: Guarding 3.5 mm TRRS audio jack lines (MIC, L/R, GND) against human-body-model ESD in handheld devices. IC Role / Device Role / Timing Role: Four-cathode diode array where each cathode connects to a separate jack contact, anode referenced to bias voltage. Use Value: Sub-100 pF loading preserves audio bandwidth up to 20 kHz; 2 µA leakage prevents DC offset in electret microphone bias networks. |
Use Scenario: Safeguarding analog sensor outputs (e.g., pressure, temperature) in factory automation modules mounted near ESD-prone machinery. IC Role / Device Role / Timing Role: ESD transient suppressor on unshielded 0–5 V analog output lines routed through cable harnesses. Use Value: 40 Ω dynamic impedance limits clamping voltage to <12 V during 30 kV discharge, keeping sensor output within ADC input range. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor ESD9X5.0ST5G | Single-channel, 5.0 V breakdown, 30 pF capacitance, SOT-523 package | Lower capacitance but requires four separate placements; lacks common-anode integration | Preferred when ultra-low capacitance (<40 pF) is critical and board area is not constrained |
| Vishay VEML6030X01 | Not applicable - optical sensor, not ESD diode; excluded due to functional mismatch | N/A | N/A |
Compared with NNCD6.8PH-T1-A, ESD9X5.0ST5G offers lower capacitance but increases layout complexity and BOM count; no verified pin-compatible alternative exists that matches its quad common-anode topology, 30 kV rating, and 2.1 × 2.0 mm footprint simultaneously.
Availability
NNCD6.8PH-T1-A is available at Aetrix Electronics and suitable for USB interface protection, HDMI control line safeguarding, and smartphone audio jack ESD mitigation requiring stable component supply and long-term manufacturing continuity.
Supply support for NNCD6.8PH-T1-A includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader delivering microcontrollers, analog, power, and connectivity solutions for automotive, industrial, and IoT applications.
NNCD6.8PH-T1-A belongs to Renesas' legacy ESD protection diode family, engineered specifically for high-density consumer electronics interface protection with emphasis on IEC 61000-4-2 compliance and automated assembly compatibility.
FAQ
What is the exact breakdown voltage tolerance of NNCD6.8PH-T1-A?
The NNCD6.8PH-T1-A has a guaranteed breakdown voltage range of 6.2 V to 7.1 V at 5 mA test current, as specified in the "ELECTRICAL CHARACTERISTICS" table of Renesas Document No. D15988EJ2V0DS00. This 0.9 V window ensures consistent clamping behavior across production lots while accommodating process variation without compromising protection margin.
Does NNCD6.8PH-T1-A support both contact and air-gap ESD testing per IEC 61000-4-2?
Yes, the NNCD6.8PH-T1-A is rated for ≥30 kV contact discharge per IEC 61000-4-2. While the datasheet explicitly cites contact discharge, the device's structure and energy handling capability (85 W surge power at 10 µs) imply robust performance under air-gap discharge as well - though official air-gap validation is not published in the 2002 datasheet.
Can NNCD6.8PH-T1-A be used with a 5 V supply rail as the common-anode reference?
Yes, NNCD6.8PH-T1-A's common anode (Pin 2) may be connected to a 5 V rail when protecting signals referenced to that voltage. Its 6.2–7.1 V breakdown ensures clamping occurs only during overvoltage transients, avoiding forward conduction during normal 5 V operation - confirmed by ≤2 µA leakage at 3.5 V reverse bias.
Is NNCD6.8PH-T1-A RoHS compliant?
Yes, NNCD6.8PH-T1-A complies with EU RoHS Directive requirements. Renesas confirms environmental compliance in its general product notices, and the device was manufactured post-2006 with lead-free terminations and halogen-free molding compound, consistent with industry standards for consumer electronics deployment.
What is the maximum allowable ambient temperature for continuous operation of NNCD6.8PH-T1-A?
NNCD6.8PH-T1-A supports continuous operation up to +85°C ambient, based on its 200 mW total power dissipation rating and thermal derating curve (Figure 1). At 85°C, usable power drops to ~120 mW; full 200 mW is only permitted at ≤25°C ambient. Junction temperature must remain ≤150°C under all conditions.
NNCD6.8PH-T1-A Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 5-VSSOP, SC-70-5, SOT-353
- Series:
- -
- Packaging:
- Bulk
- Product Status:
- Obsolete
- Type:
- Steering (Rail to Rail)
- Unidirectional Channels:
- 2
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 6.8V
- Voltage - Breakdown (Min):
- 6.2V
- Voltage - Clamping (Max) @ Ipp:
- -
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- 85W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 90pF @ 1MHz
- Operating Temperature:
- 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 5-Super Mini Mold
NNCD6.8PH-T1-A FAQ
1.How can I place an order for NNCD6.8PH-T1-A through Aetrix?
Please submit a Request for Quotation (RFQ) for NNCD6.8PH-T1-A on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for NNCD6.8PH-T1-A reliable?
The price and inventory of NNCD6.8PH-T1-A are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for NNCD6.8PH-T1-A is usually 5 days.
3.What payment methods are accepted for NNCD6.8PH-T1-A?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for NNCD6.8PH-T1-A transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for NNCD6.8PH-T1-A?
NNCD6.8PH-T1-A orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your NNCD6.8PH-T1-A order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for NNCD6.8PH-T1-A?
For technical support, including NNCD6.8PH-T1-A datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your NNCD6.8PH-T1-A requirements.
6.How does Aetrix verify that NNCD6.8PH-T1-A is sourced from the original manufacturer or authorized distributors?
All NNCD6.8PH-T1-A products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that NNCD6.8PH-T1-A meets industry standards.
7.What is the process for return or replacement of NNCD6.8PH-T1-A?
All NNCD6.8PH-T1-A units undergo pre-shipment inspection (PSI). If there is an issue with NNCD6.8PH-T1-A, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The NNCD6.8PH-T1-A part is unused and in its original packaging.
Return procedure for NNCD6.8PH-T1-A:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
NNCD6.8PH-T1-A Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
