My Inquiry
My Account
Taiwan Semiconductor Corporation P6KE110CAH
- Part No.:
- P6KE110CAH
- Manufacturer:
- Taiwan Semiconductor Corporation
- Category:
- TVS Diodes
- Package:
- DO-204AC, DO-15, Axial
- Datasheet:
-
P6KE110CAH.pdf
- Description:
- TVS DIODE 94VWM 152VC DO204AC
- Quantity:
- Payment:
- Shipping:
Inventory:3,898
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
P6KE110CAH from Taiwan Semiconductor is a bidirectional 600W transient voltage suppressor (TVS) diode designed for high-energy surge protection in automotive and industrial power rails. It features a nominal breakdown voltage of 110 V, clamps transients to ≤158 V at 3.9 A peak pulse current, and delivers fast response (<5 ns) with low dynamic impedance. Used in 12 V/24 V vehicle subsystems to protect CAN/LIN transceivers and microcontrollers from EFT and load dump.
For engineers reviewing the P6KE110CAH datasheet, P6KE110CAH pinout, P6KE110CAH application, or P6KE110CAH equivalent, key selection criteria include its AEC-Q101 qualification, DO-15 package compatibility, bidirectional clamping symmetry, and verified 175 °C junction temperature rating under repetitive surge stress.
Technical Context
The P6KE110CAH implements a planar silicon junction structure optimized for low clamping ratio (VC/VBR ≈ 1.43) and stable avalanche behavior across -55 °C to +175 °C. Its bidirectional configuration enables symmetrical protection on AC lines or floating DC buses without polarity constraints.
It meets IEC 61000-4-4 (EFT) and ISO 7637-2 (automotive load dump) immunity requirements when used with appropriate series impedance. The device's 0.107 %/°C VBR temperature coefficient ensures predictable voltage drift over thermal cycling in under-hood environments.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Peak Pulse Power (10/1000 µs) | 600 W - sustains single high-energy surges typical of automotive load dump or inductive switching |
| Breakdown Voltage VBR (min/max) | 99 V / 121 V - defines reliable avalanche initiation window at 1 mA test current |
| Stand-off Voltage VWM | 89.2 V - maximum continuous reverse voltage before leakage exceeds 1 µA |
| Clamping Voltage VC @ IPP | 158 V @ 3.9 A - peak voltage seen by protected IC during worst-case surge event |
| Junction Temperature Range | -55 °C to +175 °C - supports operation in engine control units and powertrain modules |
| Package | DO-204AC (DO-15) - industry-standard axial leaded package with 0.4 g mass and UL 94V-0 molding |
| AEC-Q101 Qualified | Yes - validated for automotive reliability including temperature cycling, HTRB, and ESD testing |
Pinout & Package
DO-204AC (DO-15) axial-leaded package with cathode band marking for unidirectional variants; P6KE110CAH is bidirectional and marked with "P6KE110C" and date code - no polarity designation required.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode/Cathode (symmetrical) | Transient conduction path | Both terminals function identically - bidirectional clamping allows placement without orientation check |
| Leads (tin-plated) | PCB interface & thermal path | Compliant with J-STD-002 solderability; 9.5 mm lead length supports 5 W steady-state dissipation at 75 °C ambient |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping symmetry | Identical VBR min/max (99–121 V) and VC (158 V) in both directions - eliminates need for polarity-aware layout |
| Low clamping ratio | VC/VBR(max) = 1.43 - minimizes overvoltage stress on downstream 130 V-rated components |
| AEC-Q101 qualification | Validated per stress test conditions for automotive electronics - enables use in ASIL-B systems with proper system-level analysis |
| Fast transient response | <5 ns response time - captures sub-microsecond EFT bursts before sensitive logic is disrupted |
| High surge current capability | 3.9 A peak pulse current (IPP) at 10/1000 µs - withstands repeated ISO 7637-2 Pulse 1/2a/5a events |
Applications
| Automotive Body Control Module | Industrial PLC I/O Protection |
|---|---|
Use Scenario: Protecting LIN bus transceivers and door module MCUs from battery line transients during jump-start or alternator load dump. IC Role / Device Role / Timing Role: Primary surge clamp on 12 V supply rail upstream of LDO regulators and communication ICs. Use Value: Limits voltage excursion to ≤158 V, preventing latch-up or permanent damage to 130 V-rated automotive-grade microcontrollers. |
Use Scenario: Safeguarding 24 V digital input channels against induced surges from nearby motor contactors or solenoid switching. IC Role / Device Role / Timing Role: Front-end transient suppressor on isolated optocoupler inputs in DIN-rail mounted controllers. Use Value: Clamps 1 kV/50 Ω EFT bursts to safe levels within 5 ns, maintaining signal integrity and avoiding false triggering. |
| LED Streetlight Driver | Telecom Power Interface |
Use Scenario: Shielding constant-current LED driver ICs from lightning-induced surges on AC mains input stage. IC Role / Device Role / Timing Role: Secondary-level TVS after MOV, placed across bridge rectifier output to absorb residual energy. Use Value: Absorbs 600 W pulses without degradation, extending lifetime of high-voltage MOSFETs and gate drivers. |
Use Scenario: Protecting PoE-powered Ethernet PHY interfaces from induced surges on 48 V DC feed lines. IC Role / Device Role / Timing Role: Bidirectional clamp on DC bias rail feeding magnetics and isolation transformers. Use Value: Symmetric clamping prevents reverse-bias overstress on transformer insulation and PHY ESD structures. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar transient suppression applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMBJ110CA | Lower peak power (600 W same), but SMB package (smaller footprint, lower thermal mass) | Preferred for space-constrained PCBs; requires tighter layout for thermal relief | Select when board area is limited and surge duty cycle is low |
| 1.5KE110CA | Same DO-15 package, higher peak power (1500 W), slower response (~10 ns) | Better for infrequent high-energy events (e.g., lightning); less suitable for fast EFT | Select when primary threat is long-duration load dump, not fast transients |
Compared with SMBJ110CA and 1.5KE110CA, the P6KE110CAH offers balanced performance: AEC-Q101 qualification and DO-15 mechanical robustness make it optimal for automotive harness-mounted protection, while its 5 ns response outperforms 1.5KE110CA in EFT-critical systems.
Availability
P6KE110CAH is available at Aetrix Electronics and suitable for automotive body electronics, industrial PLC I/O modules, LED driver power supplies, and telecom DC interface protection requiring stable component supply across multi-year production cycles.
Supply support for P6KE110CAH includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Taiwan Semiconductor Corporation (TSC) is a vertically integrated analog and discrete semiconductor manufacturer headquartered in Hsinchu, Taiwan, serving global automotive, industrial, and consumer markets since 1979.
The P6KE Series belongs to TSC's AEC-Q101-qualified TVS portfolio, engineered specifically for harsh-environment transient suppression where reliability, consistency, and thermal stability are critical - especially in vehicle power distribution and industrial control nodes.
FAQ
What does the 'CA' suffix indicate in P6KE110CAH?
The 'CA' suffix in P6KE110CAH denotes bidirectional configuration - meaning the device provides symmetrical clamping in both forward and reverse directions, unlike unidirectional 'A' variants. This makes P6KE110CAH ideal for AC-coupled lines or floating DC rails where polarity is undefined. The 'H' suffix confirms AEC-Q101 qualification, verified per automotive reliability standards.
How does P6KE110CAH compare to P6KE110A in terms of clamping performance?
P6KE110CAH has identical electrical specs to P6KE110A (VBR: 99–121 V, VC: 158 V @ 3.9 A) but differs in configuration: P6KE110CAH is bidirectional, while P6KE110A is unidirectional. That means P6KE110CAH clamps equally in both directions, whereas P6KE110A only clamps in reverse - requiring correct orientation during placement. Both share the same DO-15 package and AEC-Q101 qualification.
Can P6KE110CAH be used in place of P6KE100CAH for higher-voltage margin?
No - substituting P6KE110CAH for P6KE100CAH increases the stand-off voltage from 81.0 V to 89.2 V and raises clamping to 158 V from 144 V. This may leave 100 V-rated circuits unprotected during surges. P6KE110CAH is not a drop-in replacement; selection must match system VWM and VC limits. Always verify coordination with upstream fuses and downstream IC voltage ratings before substitution.
What is the maximum allowable surge repetition rate for P6KE110CAH?
P6KE110CAH is rated for non-repetitive surges per the 10/1000 µs waveform. For repetitive operation, derating per Figure 2 in the datasheet applies: at 25 °C ambient, peak pulse power drops to ~300 W at 1 Hz, and further at higher frequencies. Sustained repetition requires thermal modeling of PCB copper area and airflow - P6KE110CAH is not intended for continuous switching or high-duty-cycle clamping.
Is P6KE110CAH compliant with RoHS and halogen-free standards?
Yes - P6KE110CAH is RoHS compliant and halogen-free per IEC 61249-2-21. The molding compound meets UL 94V-0 flammability rating, and tin-plated leads satisfy J-STD-002 solderability requirements. These compliance attributes are confirmed in the official Taiwan Semiconductor P2203 datasheet revision and apply specifically to the P6KE110CAH ordering variant.
P6KE110CAH Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Taiwan Semiconductor Corporation
- Package/Case:
- DO-204AC, DO-15, Axial
- Series:
- P6KE
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 94V
- Voltage - Breakdown (Min):
- 105V
- Voltage - Clamping (Max) @ Ipp:
- 152V
- Current - Peak Pulse (10/1000µs):
- 4.1A
- Power - Peak Pulse:
- 600W
- Power Line Protection:
- No
- Applications:
- -
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -55°C ~ 175°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Through Hole
- Supplier Device Package:
- DO-204AC (DO-15)
P6KE110CAH FAQ
1.How can I place an order for P6KE110CAH through Aetrix?
Please submit a Request for Quotation (RFQ) for P6KE110CAH on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for P6KE110CAH reliable?
The price and inventory of P6KE110CAH are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for P6KE110CAH is usually 5 days.
3.What payment methods are accepted for P6KE110CAH?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for P6KE110CAH transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for P6KE110CAH?
P6KE110CAH orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your P6KE110CAH order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for P6KE110CAH?
For technical support, including P6KE110CAH datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your P6KE110CAH requirements.
6.How does Aetrix verify that P6KE110CAH is sourced from the original manufacturer or authorized distributors?
All P6KE110CAH products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that P6KE110CAH meets industry standards.
7.What is the process for return or replacement of P6KE110CAH?
All P6KE110CAH units undergo pre-shipment inspection (PSI). If there is an issue with P6KE110CAH, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The P6KE110CAH part is unused and in its original packaging.
Return procedure for P6KE110CAH:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
P6KE110CAH Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
