My Inquiry
My Account
Taiwan Semiconductor Corporation P6KE36CA
- Part No.:
- P6KE36CA
- Manufacturer:
- Taiwan Semiconductor Corporation
- Category:
- TVS Diodes
- Package:
- DO-204AC, DO-15, Axial
- Datasheet:
-
P6KE36CA.pdf
- Description:
- TVS DIODE 30.8VWM 49.9VC DO15
- Quantity:
- Payment:
- Shipping:
Inventory:8,963
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
P6KE36CA from Taiwan Semiconductor is a bidirectional transient voltage suppressor (TVS) diode designed for robust overvoltage protection in DC power rails and signal lines. It features a 36 V nominal breakdown voltage (VBR min/max: 32.4–39.6 V), 600 W peak pulse power rating at 10/1000 µs, clamping voltage of 49.9 V at 12.6 A peak surge current, and operates across –55 °C to +175 °C junction temperature range. It is commonly deployed in automotive body control modules and industrial PLC I/O protection circuits.
For engineers reviewing the P6KE36CA datasheet, P6KE36CA pinout, P6KE36CA application, or P6KE36CA equivalent, key selection criteria include bidirectional clamping performance, DO-15 package compatibility with high-reliability board layouts, AEC-Q101 qualification status, and verified EFT/ESD immunity in 12 V/24 V systems.
Technical Context
The P6KE36CA implements a silicon avalanche diode structure optimized for fast response (<5 ns rise time from 0 V to VBR) and low dynamic impedance under transient stress. Its bidirectional configuration enables symmetrical clamping in AC-coupled or floating signal paths without polarity sensitivity.
It complies with ANSI/IEEE C62.35 for surge testing and delivers stable clamping across ambient temperatures up to 125 °C before derating, supported by a 0.099 %/°C VBR temperature coefficient and <1 µA reverse leakage at 30.8 V standoff voltage.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Nominal Voltage | 36 V - defines rated clamping threshold for system-level surge coordination |
| Breakdown Voltage (VBR) | 32.4–39.6 V at 1 mA - ensures reliable avalanche initiation within defined tolerance band |
| Standoff Voltage (VWM) | 30.8 V - maximum continuous DC or RMS voltage the device blocks without conduction |
| Peak Pulse Power (PPK) | 600 W at 10/1000 µs - supports IEC 61000-4-5 Level 4 surge immunity (4 kV line-to-ground) |
| Clamping Voltage (VC) | 49.9 V at 12.6 A IPP - limits downstream voltage stress during worst-case transients |
| Junction Temperature Range | –55 °C to +175 °C - enables deployment in under-hood automotive and industrial environments |
| AEC-Q101 Qualified | Yes (H-suffix variant) - validated for automotive electronics per stress test requirements |
Pinout & Package
Package: DO-204AC (DO-15), axial-leaded, epoxy-molded case with UL 94V-0 flammability rating and pure tin-plated leads compliant with J-STD-002 solderability.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode (marked end) | Transient current entry point (bidirectional) | No fixed polarity - either lead conducts during positive or negative surges |
| Cathode (banded end) | Transient current exit point (bidirectional) | Band denotes cathode for unidirectional variants only; irrelevant for CA suffix |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping | Enables single-device protection of AC signals, differential buses, or floating power domains without external polarity management |
| 600 W surge capability | Withstands 10/1000 µs waveform surges up to 12.6 A, meeting IEC 61000-4-5 compliance margins |
| Sub-5 ns response time | Activates before sensitive ICs experience overvoltage damage, critical for protecting CAN, LIN, and sensor interfaces |
| AEC-Q101 qualification | Validated for automotive use including temperature cycling, HTRB, and mechanical shock per Rev G requirements |
| Low leakage & stable VBR | <1 µA IR at 30.8 V and 0.099 %/°C TC ensures minimal standby power loss and predictable clamping across operating temperature |
Applications
| Automotive Body Control Module | Industrial PLC Digital Input Protection |
|---|---|
Use Scenario: Protecting microcontroller GPIOs and LIN transceivers from load dump and inductive kickback in 12 V vehicle subsystems. IC Role / Device Role: Primary overvoltage clamp on 12 V supply rail and LIN bus lines. Use Value: Limits transient voltage to ≤49.9 V, preventing latch-up or permanent damage to 5 V tolerant MCU peripherals. |
Use Scenario: Safeguarding 24 V digital input channels against field-wiring transients and relay coil flyback in factory automation cabinets. IC Role / Device Role: Front-end TVS on optocoupler input side of isolated digital inputs. Use Value: Absorbs 600 W surges while maintaining <1 µA leakage at 24 V, preserving input logic threshold integrity. |
| Smart Lighting Driver Circuit | RS-485 Communication Port |
Use Scenario: Shielding LED driver ICs and current-sense amplifiers from ESD events and switching noise in outdoor streetlight controllers. IC Role / Device Role: Secondary-level protection after primary MOV, placed directly at IC pins. Use Value: Sub-5 ns response ensures clamping occurs before ESD pulse propagates into analog front-end circuitry. |
Use Scenario: Guarding RS-485 transceivers against cable-induced surges in building management systems. IC Role / Device Role: Bidirectional TVS across differential pair (A/B) and common-mode (GND) nodes. Use Value: Symmetrical 36 V clamping maintains signal integrity and prevents receiver saturation during ±2 kV contact ESD events. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar transient voltage suppression applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMBJ36CA (Bourns) | Same 36 V VBR range and 600 W rating, but SMB package (surface-mount); lower thermal resistance than DO-15 | Preferred for space-constrained PCBs; requires reflow-compatible layout vs. through-hole assembly | Select SMBJ36CA when board real estate is limited and automated SMT assembly is used. |
| 1.5KE36CA (ON Semiconductor) | Identical DO-15 package and 36 V rating, but 1500 W peak power (1.5 kW); higher IPP (35.1 A) and VC (58.1 V) | Used where higher surge margin is required (e.g., utility meter mains interface), but clamps at higher voltage | Choose 1.5KE36CA only if system design tolerates 58.1 V clamping and needs >600 W headroom. |
Compared with SMBJ36CA and 1.5KE36CA, the P6KE36CA offers optimal balance of proven DO-15 reliability, AEC-Q101 qualification, and precise 49.9 V clamping-making it ideal for cost-sensitive, high-volume automotive and industrial applications where exact 600 W compliance and through-hole manufacturability are prioritized.
Availability
P6KE36CA is available at Aetrix Electronics and suitable for automotive body electronics, industrial PLC I/O modules, and smart lighting systems requiring stable component supply with full traceability and long-term lifecycle support.
Supply support for P6KE36CA includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Taiwan Semiconductor Corporation (TSC) is a vertically integrated semiconductor manufacturer specializing in discrete power devices, TVS diodes, rectifiers, and MOSFETs, with global distribution and AEC-Q101 qualified product lines.
The P6KE series was developed specifically for high-reliability transient suppression in automotive and industrial environments, emphasizing robustness, tight parameter distributions, and consistent DO-15 mechanical compatibility across voltage grades.
FAQ
What does the 'CA' suffix indicate in P6KE36CA?
The 'CA' suffix in P6KE36CA denotes a bidirectional configuration - meaning the device provides symmetrical transient voltage clamping for both positive and negative polarity surges. Unlike unidirectional 'A' variants, P6KE36CA has no anode/cathode orientation requirement in circuit layout and is used where AC signals, differential buses, or floating grounds demand polarity-agnostic protection. This is confirmed in the manufacturer's documentation for bipolar applications.
Is P6KE36CA AEC-Q101 qualified?
Yes, P6KE36CA is AEC-Q101 qualified when ordered with the 'H' suffix (i.e., P6KE36CAH). The base P6KE36CA part meets all electrical and mechanical specifications of the series, but formal AEC-Q101 certification applies only to the H-suffix variant, which undergoes additional stress testing including HTGB, HTRB, and temperature cycling per Rev G requirements. Always verify ordering code for qualification status.
What is the maximum clamping voltage of P6KE36CA and at what current is it specified?
The maximum clamping voltage (VC) of P6KE36CA is 49.9 V, measured at a peak pulse current (IPP) of 12.6 A under the standard 10/1000 µs waveform. This value is guaranteed per the manufacturer's Electrical Specifications table and defines the upper voltage limit imposed on protected circuitry during worst-case transient events.
Can P6KE36CA replace P6KE36A in a design?
No - P6KE36CA and P6KE36A are not interchangeable without circuit review. P6KE36A is unidirectional (anode/cathode sensitive) with 52.0 V clamping at 12.0 A, while P6KE36CA is bidirectional with 49.9 V clamping at 12.6 A. Substituting one for the other may cause incorrect conduction in AC or floating circuits, and the clamping behavior differs in polarity-dependent applications such as DC power rail protection with defined ground reference.
What is the standoff voltage (VWM) and why is it critical for P6KE36CA selection?
The standoff voltage (VWM) of P6KE36CA is 30.8 V - the maximum continuous working voltage the device blocks without significant leakage. It must exceed the system's normal operating voltage (e.g., 24 V DC rail) with margin to avoid false triggering, yet remain low enough to ensure timely clamping during overvoltage events. For a 24 V system, 30.8 V VWM provides ~28 % headroom while enabling effective protection.
P6KE36CA Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Taiwan Semiconductor Corporation
- Package/Case:
- DO-204AC, DO-15, Axial
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 30.8V
- Voltage - Breakdown (Min):
- 34.2V
- Voltage - Clamping (Max) @ Ipp:
- 49.9V
- Current - Peak Pulse (10/1000µs):
- 12A
- Power - Peak Pulse:
- 600W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- DO-15
P6KE36CA FAQ
1.How can I place an order for P6KE36CA through Aetrix?
Please submit a Request for Quotation (RFQ) for P6KE36CA on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for P6KE36CA reliable?
The price and inventory of P6KE36CA are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for P6KE36CA is usually 5 days.
3.What payment methods are accepted for P6KE36CA?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for P6KE36CA transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for P6KE36CA?
P6KE36CA orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your P6KE36CA order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for P6KE36CA?
For technical support, including P6KE36CA datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your P6KE36CA requirements.
6.How does Aetrix verify that P6KE36CA is sourced from the original manufacturer or authorized distributors?
All P6KE36CA products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that P6KE36CA meets industry standards.
7.What is the process for return or replacement of P6KE36CA?
All P6KE36CA units undergo pre-shipment inspection (PSI). If there is an issue with P6KE36CA, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The P6KE36CA part is unused and in its original packaging.
Return procedure for P6KE36CA:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
P6KE36CA Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
