My Inquiry
My Account
Nexperia USA Inc. PESD27VV1BLSYL
- Part No.:
- PESD27VV1BLSYL
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- SOD-882
- Datasheet:
-
PESD27VV1BLSYL.pdf
- Description:
- PESD27VV1BLS/SOD882BD/XSON2
- Quantity:
- Payment:
- Shipping:
Inventory:10,704
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD27VV1BLS from Nexperia is a bidirectional ESD protection diode in DFN1006BD-2 (SOD882BD) package, designed to protect single-line interfaces against 30 kV IEC 61000-4-2 and ISO 10605 transients. It features 27 V reverse stand-off voltage, 36 V clamping at 3 A, and ultra-low 1 nA leakage, deployed on USB Type-C CC/SBU lines.
For engineers reviewing the PESD27VV1BLS datasheet, PESD27VV1BLS pinout, PESD27VV1BLS application, or PESD27VV1BLS equivalent, key selection criteria include bidirectional clamping performance, sub-17 pF capacitance for signal integrity, side-wettable flanks for solder inspection, and compatibility with low-speed interface layout constraints.
Technical Context
This device implements a dual-cathode, bidirectional TVS structure enabling symmetrical clamping for ± polarity transients on a single line. Its 14–17 pF capacitance at 0 V bias ensures minimal signal distortion on USB Type-C SBU/CC channels operating below 10 MHz.
The 0.3 Ω dynamic resistance and 36 V clamping at 3 A (8/20 μs) provide fast energy diversion while maintaining low forward conduction loss during ESD events. Junction temperature rating up to 150 °C supports operation in thermally constrained portable enclosures.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Stand-off Voltage | 27 V - Maximum continuous working voltage before conduction begins; sets safe operating margin for 24 V nominal interfaces. |
| Clamping Voltage | 36 V (typ) at 3 A - Peak voltage seen by protected IC during 8/20 μs surge; limits stress on downstream PHY transceivers. |
| ESD Rating | ±30 kV (IEC 61000-4-2 contact) - Withstands worst-case human-body-model discharges without degradation. |
| Diode Capacitance | 14–17 pF at 0 V - Low enough to avoid signal rise-time degradation on USB Type-C sideband use (SBU) and configuration channel (CC) lines. |
| Leakage Current | <1 nA at 27 V - Negligible DC loading on high-impedance CC line voltage detection circuits. |
| Package | DFN1006BD-2 (SOD882BD), 1.0 × 0.6 × 0.47 mm - Ultra-compact footprint with side-wettable flanks for automated optical solder-joint inspection. |
Pinout & Package
DFN1006BD-2 (SOD882BD) is a 2-terminal leadless plastic package with side-wettable flanks, 0.65 mm pitch, and 1.0 mm × 0.6 mm body size. Cathodes are marked with a bar on the top surface.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (K1) | Cathode of first diode | Connects to protected line; forms one half of bidirectional clamp path to ground. |
| 2 (K2) | Cathode of second diode | Connects to same protected line; completes symmetrical clamp for negative transients. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping | Enables single-device protection of AC-coupled or polarity-agnostic lines like USB Type-C CC/SBU without external biasing. |
| Side-wettable flanks | Supports automated X-ray or AOI inspection of solder joints in high-volume SMT assembly without requiring cross-sectioning. |
| Sub-17 pF capacitance | Maintains signal integrity on low-speed differential and single-ended control lines where bandwidth ≤10 MHz is sufficient. |
| 30 kV ESD robustness | Exceeds IEC 61000-4-2 Level 4 requirements, eliminating need for secondary protection stages in consumer-grade end equipment. |
Applications
| USB Type-C Configuration Channel (CC) | USB Type-C Sideband Use (SBU) |
|---|---|
Use Scenario: Protects CC line during plug insertion/removal where floating voltages and contact bounce induce ESD pulses. IC Role / Device Role / Timing Role: Bidirectional transient voltage suppressor placed between connector and USB PD controller. Use Value: Prevents latch-up or damage to CC logic circuitry while preserving <1 nA leakage required for voltage-based plug orientation detection. |
Use Scenario: Shields SBU pins used for analog audio or debug signals from ESD during cable mating. IC Role / Device Role / Timing Role: Low-capacitance ESD clamp co-located at USB-C receptacle to minimize stub length. Use Value: Limits clamping voltage to 36 V under 3 A surge, keeping SBU receiver input within safe operating area without distorting audio band signals. |
| Industrial Human-Machine Interface (HMI) Buttons | Consumer Audio Jack Detection Lines |
Use Scenario: Protects momentary push-button inputs exposed on panel-mounted enclosures subject to operator ESD. IC Role / Device Role / Timing Role: Standalone ESD shunt on microcontroller GPIO lines tied to mechanical switches. Use Value: Maintains system reliability across 100,000+ actuations by preventing gate oxide damage without adding RC filtering delay. |
Use Scenario: Safeguards headset detection circuitry in smartphones and tablets where jack insertion generates triboelectric discharge. IC Role / Device Role / Timing Role: Low-leakage protector on bias resistors feeding audio codec sense pins. Use Value: Ensures accurate detection state retention via <1 nA IRM, avoiding false insert/remove triggers caused by leakage-induced voltage drift. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NUP4202MR6T1G | Higher 120 pF capacitance; unidirectional configuration requires two devices per line. | Not suitable for space-constrained USB-C CC/SBU; better for higher-voltage industrial I/O. | Select only when board area allows dual-SOD-523 placement and capacitance tolerance >100 pF. |
| Vishay VEML3020-001 | 24 V VRWM; 33 V clamping at 3 A; 12 pF capacitance; same DFN1006 package. | Lower stand-off voltage restricts use to 18 V max systems; tighter clamping improves margin for sensitive receivers. | Prefer when protecting 12 V logic interfaces where lower clamping outweighs reduced voltage headroom. |
Compared with NUP4202MR6T1G, PESD27VV1BLS saves 50% board area and cuts capacitance by 85%, critical for USB-C layouts; versus VEML3020-001, it trades 3 V stand-off margin for 3 kV higher ESD rating and identical footprint compatibility.
Availability
PESD27VV1BLS is available at Aetrix Electronics and suitable for USB Type-C interface protection, industrial HMI button inputs, and consumer audio jack detection lines requiring stable component supply and full traceability through production ramp.
Supply support for PESD27VV1BLS includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert delivering high-performance, reliable discrete, logic, and MOSFET devices optimized for efficiency-critical applications.
This device belongs to Nexperia's ESD protection portfolio targeting compact, high-reliability interface hardening in portable and USB-enabled electronics, with emphasis on manufacturability and signal fidelity.
FAQ
What is the maximum peak pulse current this device can handle?
The PESD27VV1BLS is rated for 3 A peak pulse current under IEC 61000-4-5 8/20 μs waveform conditions. This value is specified in Table 1 and confirmed in Limiting Values (Table 5), and represents the highest non-destructive transient current the device sustains without parametric shift or failure.
Does this part support automated optical inspection (AOI) of solder joints?
Yes - the DFN1006BD-2 package features side-wettable flanks, enabling reliable AOI or X-ray inspection of solder fillets without requiring destructive cross-section analysis. This is explicitly stated in the General Description and Package Outline sections of the datasheet.
Can PESD27VV1BLS be used on high-speed data lines like USB 2.0 or HDMI?
No - its 14–17 pF capacitance exceeds recommended limits (<2 pF) for USB 2.0 (480 Mbps) or HDMI (≥1.65 Gbps) signal integrity. It is qualified only for low-speed interfaces such as USB Type-C CC/SBU, buttons, and audio detection lines, as stated in the Applications section.
How is polarity identified on the physical package?
A marking bar on the top surface indicates the cathode side; Pin 1 (K1) and Pin 2 (K2) are both cathodes, confirming bidirectional functionality. The marking code "9E" is laser-etched per Table 4, and the cathode orientation is shown in Figure 8's package outline and Table 2's simplified graphic symbol.
PESD27VV1BLSYL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- SOD-882
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 27V (Max)
- Voltage - Breakdown (Min):
- 28V
- Voltage - Clamping (Max) @ Ipp:
- 45V
- Current - Peak Pulse (10/1000µs):
- 3A (8/20µs)
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 14pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DFN1006BD-2
PESD27VV1BLSYL FAQ
1.How can I place an order for PESD27VV1BLSYL through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD27VV1BLSYL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD27VV1BLSYL reliable?
The price and inventory of PESD27VV1BLSYL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD27VV1BLSYL is usually 5 days.
3.What payment methods are accepted for PESD27VV1BLSYL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD27VV1BLSYL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD27VV1BLSYL?
PESD27VV1BLSYL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD27VV1BLSYL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD27VV1BLSYL?
For technical support, including PESD27VV1BLSYL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD27VV1BLSYL requirements.
6.How does Aetrix verify that PESD27VV1BLSYL is sourced from the original manufacturer or authorized distributors?
All PESD27VV1BLSYL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD27VV1BLSYL meets industry standards.
7.What is the process for return or replacement of PESD27VV1BLSYL?
All PESD27VV1BLSYL units undergo pre-shipment inspection (PSI). If there is an issue with PESD27VV1BLSYL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD27VV1BLSYL part is unused and in its original packaging.
Return procedure for PESD27VV1BLSYL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD27VV1BLSYL Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
