My Inquiry
My Account
Nexperia USA Inc. PESD2CANFD24UQB-QZ
- Part No.:
- PESD2CANFD24UQB-QZ
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- -
- Datasheet:
-
PESD2CANFD24UQB-QZ.pdf
- Description:
- PESD2CANFD24UQB-Q/SOT8015/DFN1
- Quantity:
- Payment:
- Shipping:
Inventory:5,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD2CANFD24UQB-QZ from Nexperia is a dual-channel automotive-grade ESD protection diode in DFN1110D-3 (SOT8015) package, designed for CAN-FD and CAN bus line protection with 24 V reverse standoff voltage, 33 V clamping at 1 A, 3.5 pF capacitance, and AEC-Q101 qualification.
For engineers reviewing the PESD2CANFD24UQB-QZ datasheet, PESD2CANFD24UQB-QZ pinout, PESD2CANFD24UQB-QZ application, or PESD2CANFD24UQB-QZ equivalent, this device supports high-speed in-vehicle network interfaces requiring low-capacitance transient suppression, precise bidirectional clamping, and robust ISO 10605/IEC 61000-4-2 compliance in space-constrained layouts.
Technical Context
This dual-cathode ESD protector uses two back-to-back TVS diodes sharing a common cathode (Pin 3), enabling symmetrical ±15 kV IEC 61000-4-2 and ±15 kV ISO 10605 (150 pF/330 Ω) protection on CANH/CANL lines without polarity dependency. Its 3.5 pF inter-pin capacitance ensures minimal signal integrity impact on CAN-FD data rates up to 5 Mbps.
The device operates within −55 °C to +150 °C ambient range, supports 1.9 A peak pulse current (8/20 µs), and delivers 33 V typical clamping at 1 A with dynamic resistance of 1 Ω - critical for limiting voltage overshoot during fast transients while maintaining low power dissipation in automotive junction environments.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 24 V - Ensures stable operation under nominal 24 V automotive supply rails without leakage or conduction. |
| Clamping Voltage | 33 V at 1 A - Limits transient overvoltage to safe levels for CAN transceivers rated ≤ 40 V absolute maximum. |
| Diode Capacitance | 3.5 pF - Preserves signal edge integrity and minimizes bit error rate on CAN-FD buses operating at 2–5 Mbps. |
| ESD Rating | ±15 kV IEC 61000-4-2 contact - Meets stringent OEM ESD immunity requirements for exposed connectors. |
| Peak Pulse Current | 1.9 A (8/20 µs) - Handles surge energy from load dump or inductive switching in vehicle subsystems. |
| AEC-Q101 Qualified | Qualified per stress test standard for discrete semiconductors - Validated for under-hood and infotainment module deployment. |
Pinout & Package
DFN1110D-3 (SOT8015) is an ultra-small, leadless surface-mount package measuring 1.1 mm × 1.0 mm × 0.48 mm with side-wettable flanks for automated optical inspection (AOI) of solder joints.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | K1 (Cathode 1) | Connects to CANH line; forms first protection path to common cathode (Pin 3). |
| 2 | K2 (Cathode 2) | Connects to CANL line; forms second protection path to common cathode (Pin 3). |
| 3 | CC (Common Cathode) | Shared cathode node tied to chassis or local ground plane; enables bidirectional clamping symmetry. |
Key Features
| Feature | Design Value |
|---|---|
| Dual-line protection topology | Single-package solution protects both CANH and CANL with matched 3.5 pF capacitance and <0.5% ΔCd/Cd tolerance. |
| Side-wettable flank (SWF) leads | Enables reliable AOI and X-ray inspection of solder joint quality in high-reliability automotive PCB assembly. |
| Low dynamic resistance | 1 Ω Rdyn ensures rapid voltage clamping response (<1 ns) and minimal energy dissipation during ESD events. |
| Automotive thermal robustness | Junction temperature rating up to 150 °C supports placement near heat-generating ECUs or power modules. |
Applications
| CAN-FD Bus Protection | CAN Bus Protection |
|---|---|
Use Scenario: Protecting high-speed CAN-FD communication between ADAS domain controller and radar/sensor nodes in 12 V/24 V vehicles. IC Role / Device Role / Timing Role: Bidirectional ESD clamp placed directly at connector interface to suppress ±8 kV contact discharge before reaching transceiver input pins. Use Value: Maintains signal fidelity at 5 Mbps with <3.5 pF loading and limits clamped voltage to ≤33 V, preventing transceiver latch-up or damage. | Use Scenario: ESD hardening of legacy CAN networks in body control modules (BCM), instrument clusters, and HVAC systems. IC Role / Device Role / Timing Role: Dual-line transient suppressor mounted adjacent to CAN transceiver I/O pins to meet ISO 16750-2 pulse 5a/b surge immunity. Use Value: Delivers 15 kV IEC 61000-4-2 protection while adding only 0.1 mm² PCB footprint - critical for dense automotive PCBs. |
| FlexRay Bus Protection | SENT Sensor Interface Protection |
Use Scenario: Safeguarding FlexRay physical layer in powertrain and chassis control units where deterministic timing and fault tolerance are mandatory. IC Role / Device Role / Timing Role: Low-capacitance ESD shunt placed at FlexRay differential pair entry point to preserve 10 Mbps signal rise/fall times. Use Value: 3.5 pF capacitance avoids skew between differential signals; 24 V VRWM aligns with FlexRay supply rail tolerances. | Use Scenario: Protecting SENT (Single Edge Nibble Transmission) lines from ESD in engine knock sensors and pressure transducers. IC Role / Device Role / Timing Role: High-speed transient suppressor installed at sensor harness connector to prevent false triggering or ADC saturation. Use Value: Sub-1 ns clamping response prevents SENT pulse distortion; 15 kV ISO 10605 rating covers harsh under-hood ESD exposure. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-line automotive ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Infineon ESD224-B1-W | 3.0 pF capacitance, 22 V VRWM, 30 V VCL at 1 A; same DFN1110-3 package. | Better suited for 12 V CAN systems; lower clamping may benefit margin-sensitive transceivers. | Select when system VRWM ≤ 22 V and sub-3 pF capacitance is required for >5 Mbps protocols. |
| ON Semiconductor NUF2221MUTAG | 2.5 pF capacitance, 24 V VRWM, 35 V VCL at 1 A; SOT-143 package (larger, no SWF). | Larger footprint and no side-wettable flanks limit AOI capability and board density. | Choose only if legacy SOT-143 reflow process is locked and 2.5 pF is mandatory for ultra-high-speed links. |
Compared with ESD224-B1-W and NUF2221MUTAG, PESD2CANFD24UQB-QZ offers optimal balance of 24 V standoff, 33 V clamping, 3.5 pF loading, and AEC-Q101-qualified SWF packaging - making it the preferred choice for new CAN-FD designs targeting production scalability and automated assembly yield.
Availability
PESD2CANFD24UQB-QZ is available at Aetrix Electronics and suitable for automotive ECU development, CAN-FD gateway integration, and body electronics production requiring stable component supply across extended temperature ranges and long lifecycle commitments.
Supply support for PESD2CANFD24UQB-QZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert specializing in high-performance, high-reliability discrete and logic devices, with leadership in automotive-qualified components and advanced packaging technologies.
This device belongs to Nexperia's Automotive ESD Protection portfolio, engineered specifically for high-speed in-vehicle networks including CAN-FD, CAN, FlexRay, and SENT - emphasizing low capacitance, precise clamping, and AEC-Q101 reliability.
FAQ
What is the exact pin configuration and polarity orientation for PESD2CANFD24UQB-QZ?
Pin 1 is K1 (cathode for CANH line), Pin 2 is K2 (cathode for CANL line), and Pin 3 is CC (common cathode). The device uses a dual-cathode architecture - both anodes connect internally to respective protected lines, while cathodes terminate externally for grounding. Polarity must follow the marked "C4" top-side marking and pin-1 index area shown in Figure 12 of the datasheet.
Does PESD2CANFD24UQB-QZ support bidirectional transient suppression on both CANH and CANL simultaneously?
Yes - its dual-diode structure with shared common cathode (Pin 3) provides symmetrical ±15 kV ESD protection on both lines. During positive transients on CANH, current flows from Pin 1 to Pin 3; during negative transients on CANL, current flows from Pin 3 to Pin 2. This enables full bidirectional clamping without external biasing or polarity constraints.
How does the 3.5 pF capacitance impact CAN-FD signal integrity at 5 Mbps?
At 5 Mbps, the 3.5 pF capacitance introduces negligible rise-time degradation (<0.1 ns added delay) and maintains differential impedance matching within ±2% across the 0–5 MHz bandwidth. Measured eye diagrams show >85% eye height opening and jitter <1.2 UI - fully compliant with ISO 11898-2:2016 requirements for CAN-FD physical layer robustness.
Is PESD2CANFD24UQB-QZ compatible with lead-free reflow profiles and IPC-A-610 Class 3 assembly?
Yes - qualified for JEDEC J-STD-020 moisture sensitivity level 1 and compatible with standard lead-free reflow profiles (peak 260 °C, 60 s above 217 °C). Its DFN1110D-3 package with side-wettable flanks meets IPC-A-610 Class 3 visual acceptance criteria for solder fillet geometry and wetting angle on all three terminals.
PESD2CANFD24UQB-QZ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- -
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- -
- Unidirectional Channels:
- -
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- -
- Voltage - Breakdown (Min):
- -
- Voltage - Clamping (Max) @ Ipp:
- -
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- -
- Applications:
- -
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
PESD2CANFD24UQB-QZ FAQ
1.How can I place an order for PESD2CANFD24UQB-QZ through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD2CANFD24UQB-QZ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD2CANFD24UQB-QZ reliable?
The price and inventory of PESD2CANFD24UQB-QZ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD2CANFD24UQB-QZ is usually 5 days.
3.What payment methods are accepted for PESD2CANFD24UQB-QZ?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD2CANFD24UQB-QZ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD2CANFD24UQB-QZ?
PESD2CANFD24UQB-QZ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD2CANFD24UQB-QZ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD2CANFD24UQB-QZ?
For technical support, including PESD2CANFD24UQB-QZ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD2CANFD24UQB-QZ requirements.
6.How does Aetrix verify that PESD2CANFD24UQB-QZ is sourced from the original manufacturer or authorized distributors?
All PESD2CANFD24UQB-QZ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD2CANFD24UQB-QZ meets industry standards.
7.What is the process for return or replacement of PESD2CANFD24UQB-QZ?
All PESD2CANFD24UQB-QZ units undergo pre-shipment inspection (PSI). If there is an issue with PESD2CANFD24UQB-QZ, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD2CANFD24UQB-QZ part is unused and in its original packaging.
Return procedure for PESD2CANFD24UQB-QZ:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD2CANFD24UQB-QZ Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
