My Inquiry
My Account
Nexperia USA Inc. PESD2CANFD27UQB-QZ
- Part No.:
- PESD2CANFD27UQB-QZ
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- -
- Datasheet:
-
PESD2CANFD27UQB-QZ.pdf
- Description:
- PESD2CANFD27UQB-Q/SOT8015/DFN1
- Quantity:
- Payment:
- Shipping:
Inventory:5,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD2CANFD27UQB-Q from Nexperia is a dual-channel automotive-grade ESD protection diode in DFN1110D-3 (SOT8015) package, designed for CAN-FD and CAN bus lines. It provides 27 V reverse standoff voltage, 34 V clamping at 1 A, 4.0 pF capacitance, 15 kV IEC 61000-4-2 ESD immunity, and AEC-Q101 qualification - enabling robust transient suppression in high-speed in-vehicle networks.
For engineers reviewing the PESD2CANFD27UQB-Q datasheet, PESD2CANFD27UQB-Q pinout, PESD2CANFD27UQB-Q application, or PESD2CANFD27UQB-Q equivalent, key selection criteria include bidirectional clamping performance, ultra-low capacitance for signal integrity on 5 Mbps CAN-FD buses, side-wettable flank compatibility with automated optical inspection (AOI), and common-cathode dual-diode topology for space-constrained automotive PCB layouts.
Technical Context
This device implements a dual-channel, common-cathode TVS diode architecture with two independent anode-to-cathode paths (Pin 1→3 and Pin 2→3), optimized for differential bus protection. Its low dynamic resistance (1.3 Ω) and fast response (<1 ns) ensure effective clamping of ESD transients per IEC 61000-4-2 and ISO 10605 standards without distorting CAN-FD's 5 Mbps signaling waveform.
The DFN1110D-3 package integrates side-wettable flanks for solder joint quality verification, while its 1.1 mm × 1.0 mm footprint supports placement directly at vehicle harness connectors. The 27 V VRWM aligns with CAN-FD's ±30 V common-mode range, and 4.0 pF typical capacitance minimizes insertion loss and timing skew across differential pairs.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 27 V - Ensures no conduction during normal CAN-FD bus operation (±25 V common-mode range) |
| Clamping Voltage | 34 V at 1 A (8/20 µs) - Limits transient voltage to safe levels below transceiver absolute maximum ratings |
| Diode Capacitance | 4.0 pF at 1 MHz, −2.5 V - Preserves signal integrity on 5 Mbps CAN-FD differential lines with <0.1 UI jitter impact |
| ESD Withstand | 15 kV contact discharge (IEC 61000-4-2) - Meets OEM-level ESD immunity requirements for body control modules |
| AEC-Q101 Qualified | Qualified per stress test standard for discrete semiconductors - Validated for under-hood temperature cycling (−55 °C to 150 °C) |
| Peak Pulse Current | 1.8 A (8/20 µs) - Handles surge events from load dump or inductive switching in 12 V automotive systems |
Pinout & Package
DFN1110D-3 (SOT8015) is a 3-terminal, leadless, ultra-thin surface-mount package measuring 1.1 mm × 1.0 mm × 0.48 mm with 0.65 mm pitch and side-wettable flanks for AOI-compatible reflow soldering.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | K1 (Cathode 1) | Anode connects to CANH or first protected line; cathode ties to common return path |
| 2 | K2 (Cathode 2) | Anode connects to CANL or second protected line; enables dual-line protection with single ground reference |
| 3 | CC (Common Cathode) | Shared cathode node routed to chassis or low-impedance ground plane - critical for balanced clamping and minimal ground bounce |
Key Features
| Feature | Design Value |
|---|---|
| Dual-channel common-cathode topology | Enables compact, symmetric protection of differential CAN-FD pairs without separate ground traces for each diode |
| Side-wettable flanks (SWF) | Supports automated optical inspection of solder joints - essential for zero-defect automotive manufacturing compliance |
| Ultra-low 4.0 pF capacitance | Minimizes signal rise-time degradation and reflection on high-speed CAN-FD buses operating up to 5 Mbps |
| 15 kV IEC 61000-4-2 & ISO 10605 rating | Validated for both system-level and component-level ESD testing required by major Tier 1 suppliers |
| 1.3 Ω dynamic resistance | Reduces clamping voltage overshoot during fast transients, improving margin against transceiver overvoltage failure |
Applications
| CAN-FD Bus Protection | CAN Bus Protection |
|---|---|
|
Use Scenario: Protecting high-speed powertrain ECUs communicating over 2–5 Mbps CAN-FD networks in engine control units and transmission controllers. IC Role / Device Role / Timing Role: Bidirectional transient voltage suppressor placed between CAN transceiver I/O pins and vehicle harness connector. Use Value: Maintains signal fidelity at 5 Mbps while clamping 8/20 µs surges to ≤34 V - preventing transceiver latch-up or permanent damage during ESD events. |
Use Scenario: Securing legacy 1 Mbps CAN nodes in body electronics modules such as door control units and seat control modules. IC Role / Device Role / Timing Role: Dual-line ESD clamp mounted directly at PCB edge connector to minimize transient loop area. Use Value: Delivers 15 kV ESD immunity without adding series impedance or capacitance that would degrade dominant-time or recessive-time timing margins. |
| FlexRay Bus Protection | SENT Sensor Interface Protection |
|
Use Scenario: Safeguarding FlexRay communication channels in advanced driver-assistance systems (ADAS) domain controllers requiring deterministic 10 Mbps data transfer. IC Role / Device Role / Timing Role: Low-capacitance transient suppressor on differential FlexRay A/B lines, referenced to isolated ground plane. Use Value: 4.0 pF capacitance ensures <1% signal distortion on 10 Mbps FlexRay edges, preserving time-triggered protocol synchronization. |
Use Scenario: Shielding SENT (Single Edge Nibble Transmission) sensor interfaces in engine knock and pressure sensors exposed to under-hood ESD. IC Role / Device Role / Timing Role: Single-line ESD clamp on SENT data line, leveraging shared cathode for minimal board space in small-sensor PCBs. Use Value: 27 V VRWM exceeds SENT's 0–5 V logic swing and 12 V supply tolerance, avoiding leakage-induced measurement offset in analog sensor front-ends. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-channel automotive ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NUF2221MUTAG | Higher 5.5 pF capacitance; 24 V VRWM; SO-8 package (3.9 mm × 4.9 mm) | Larger footprint limits use in space-constrained CAN-FD modules; lower VRWM reduces margin on 24 V commercial vehicle buses | Select when board layout allows larger package and 24 V standoff suffices for legacy CAN systems |
| Infineon ESD224-BI02025 | 30 V VRWM; 3.5 pF capacitance; same DFN1110D-3 package; 12 kV IEC 61000-4-2 rating | Higher standoff supports 24 V truck/bus systems but reduced ESD rating may not meet OEM Tier 1 requirements for passenger vehicles | Prefer for heavy-duty vehicle platforms where 30 V operation is mandatory and 12 kV ESD is acceptable |
Compared with NUF2221MUTAG and ESD224-BI02025, PESD2CANFD27UQB-Q uniquely balances 27 V standoff, 4.0 pF capacitance, 15 kV ESD rating, and DFN1110D-3 size - making it optimal for next-generation CAN-FD ECUs requiring compact, high-fidelity, and fully qualified protection.
Availability
PESD2CANFD27UQB-Q is available at Aetrix Electronics and suitable for automotive powertrain control units, ADAS domain controllers, and body electronics modules requiring stable component supply with full AEC-Q101 traceability and PPAP-ready documentation.
Supply support for PESD2CANFD27UQB-Q includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in automotive-qualified components and advanced packaging technologies.
This device belongs to Nexperia's Automotive ESD Protection portfolio, engineered specifically for high-speed in-vehicle networks including CAN-FD, CAN, FlexRay, and SENT - emphasizing ultra-low capacitance, AEC-Q101 compliance, and AOI-ready packaging.
FAQ
What is the maximum junction temperature rating for PESD2CANFD27UQB-Q?
The device is rated for a maximum junction temperature of 150 °C, validated per AEC-Q101 thermal cycling and high-temperature operating life tests. This enables reliable operation in under-hood environments such as engine control units and transmission control modules where ambient temperatures reach 125 °C and power dissipation induces additional thermal rise.
Does PESD2CANFD27UQB-Q support bidirectional or unidirectional ESD protection?
PESD2CANFD27UQB-Q provides bidirectional protection per channel, achieved through symmetrical avalanche breakdown characteristics between anode and cathode terminals. Each channel (Pin 1–3 and Pin 2–3) clamps both positive and negative transients - essential for differential bus protocols like CAN-FD that swing above and below ground reference.
How does the common cathode (Pin 3) connection affect PCB layout?
Pin 3 must be connected to a low-inductance, dedicated ground plane with minimal trace length - ideally via multiple vias - to prevent ground bounce during simultaneous clamping events on both channels. Sharing this node with noisy digital or power grounds degrades clamping symmetry and increases residual voltage on protected lines.
Is the 4.0 pF capacitance measured differentially or single-ended?
The 4.0 pF value is measured single-ended: capacitance from Pin 1 to Pin 3 and Pin 2 to Pin 3, each at 1 MHz and −2.5 V reverse bias. Differential capacitance (Pin 1 to Pin 2) is not specified, but matching tolerance of ±0.5% ensures balanced loading on CAN-H and CAN-L lines, preserving common-mode rejection.
PESD2CANFD27UQB-QZ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- -
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- -
- Unidirectional Channels:
- -
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- -
- Voltage - Breakdown (Min):
- -
- Voltage - Clamping (Max) @ Ipp:
- -
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- -
- Applications:
- -
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
PESD2CANFD27UQB-QZ FAQ
1.How can I place an order for PESD2CANFD27UQB-QZ through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD2CANFD27UQB-QZ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD2CANFD27UQB-QZ reliable?
The price and inventory of PESD2CANFD27UQB-QZ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD2CANFD27UQB-QZ is usually 5 days.
3.What payment methods are accepted for PESD2CANFD27UQB-QZ?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD2CANFD27UQB-QZ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD2CANFD27UQB-QZ?
PESD2CANFD27UQB-QZ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD2CANFD27UQB-QZ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD2CANFD27UQB-QZ?
For technical support, including PESD2CANFD27UQB-QZ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD2CANFD27UQB-QZ requirements.
6.How does Aetrix verify that PESD2CANFD27UQB-QZ is sourced from the original manufacturer or authorized distributors?
All PESD2CANFD27UQB-QZ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD2CANFD27UQB-QZ meets industry standards.
7.What is the process for return or replacement of PESD2CANFD27UQB-QZ?
All PESD2CANFD27UQB-QZ units undergo pre-shipment inspection (PSI). If there is an issue with PESD2CANFD27UQB-QZ, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD2CANFD27UQB-QZ part is unused and in its original packaging.
Return procedure for PESD2CANFD27UQB-QZ:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD2CANFD27UQB-QZ Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
