My Inquiry
My Account
Nexperia USA Inc. PESD2CANFD36UU-QF
- Part No.:
- PESD2CANFD36UU-QF
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- SC-70, SOT-323
- Datasheet:
-
PESD2CANFD36UU-QF.pdf
- Description:
- AUTOMOTIVE IN-VEHICLE NETWORK PR
- Quantity:
- Payment:
- Shipping:
Inventory:9,685
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD2CANFD36UU-QF from Nexperia is a dual-channel automotive-grade ESD protection diode in SOT323 package, designed to safeguard CAN-FD and FlexRay bus lines against ±15 kV IEC 61000-4-2 ESD events, with 36 V reverse standoff voltage, 4.3 pF capacitance, and 65 V clamping at 16 A TLP pulse - deployed at vehicle ECUs and gateway modules.
For engineers reviewing the PESD2CANFD36UU-QF datasheet, PESD2CANFD36UU-QF pinout, PESD2CANFD36UU-QF application, or PESD2CANFD36UU-QF equivalent, key selection criteria include bidirectional clamping performance, AEC-Q101 qualification, low capacitance for high-speed bus integrity, and common-cathode dual-diode topology for compact two-line protection.
Technical Context
This device implements a dual unidirectional TVS configuration with shared cathode (Pin 3), enabling independent protection of two differential bus lines (e.g., CANH/CANL) while minimizing PCB footprint. Its 36 V VRWM ensures compatibility with 24 V automotive board nets without leakage-induced signal distortion.
Clamping is characterized using both 8/20 µs surge (VCL = 48 V @ 1 A) and 100 ns TLP (VCL = 65 V @ 16 A), with dynamic resistance of 1.3 Ω confirming fast transient response. Capacitance matching (ΔCd/Cd ≤ 0.5%) supports balanced signal integrity across protected pairs.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage (VRWM) | 36 V - Ensures no conduction during normal 24 V board net operation; avoids false triggering on transients below system operating voltage. |
| Clamping Voltage (VCL) | 65 V @ 16 A TLP - Limits peak bus-line overvoltage to safe levels for CAN-FD transceivers rated ≤ 70 V absolute max. |
| Diode Capacitance (Cd) | 4.3 pF @ 2.5 V - Preserves signal edge integrity on CAN-FD buses up to 5 Mbps; minimizes reflection and jitter. |
| ESD Withstand | ±15 kV IEC 61000-4-2 contact discharge - Meets automotive OEM ESD immunity requirements for exterior connectors and harness interfaces. |
| AEC-Q101 Qualification | Qualified - Validated for temperature cycling (-55 °C to +150 °C), HTRB, and ESD stress per automotive discrete semiconductor standard. |
| Peak Pulse Current (IPPM) | 1.5 A @ 8/20 µs - Supports IEC 61000-4-5 Level 3 surge immunity (1 kV line-to-ground) when used with appropriate series impedance. |
Pinout & Package
Package: SC-70 (SOT323), 3-lead surface-mount plastic package, 2.0 mm × 1.25 mm × 0.95 mm body, 1.3 mm lead pitch.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | K1 (Cathode of Diode 1) | Connects to first protected line (e.g., CANH); anode tied internally to common cathode via ESD junction. |
| 2 | K2 (Cathode of Diode 2) | Connects to second protected line (e.g., CANL); enables independent clamping for differential pair. |
| 3 | CC (Common Cathode) | Reference node for both diodes; must be connected to clean chassis or signal ground with minimal inductance. |
Key Features
| Feature | Design Value |
|---|---|
| Dual-line ESD protection in single SOT323 | Reduces PCB area by >40% vs. two discrete diodes; eliminates layout mismatch between CANH/CANL paths. |
| Low capacitance matching (ΔCd ≤ 0.5%) | Maintains <10 ps skew between protected lines - critical for CAN-FD bit timing accuracy at 5 Mbps. |
| Common-cathode architecture | Enables symmetrical clamping to ground without requiring separate ground returns; simplifies routing and reduces loop inductance. |
| AEC-Q101 qualified | Validated for 150 °C junction temperature, humidity robustness, and mechanical shock - suitable for under-hood ECU placement. |
Applications
| Automotive CAN-FD Gateway | Truck 24 V Board Net Interface |
|---|---|
|
Use Scenario: Protection of high-speed CAN-FD communication between ADAS domain controller and central gateway. IC Role / Device Role / Timing Role: Bidirectional ESD clamp placed directly at connector entry point before CAN transceiver input pins. Use Value: Prevents latch-up or damage to ISO 11898-2 transceivers during door-handle or diagnostic port ESD events while preserving 5 Mbps signal fidelity. |
Use Scenario: ESD hardening of powertrain control module interfaces in heavy-duty commercial vehicles. IC Role / Device Role / Timing Role: Dual-line transient suppressor on 24 V-rated CAN and SENT sensor lines exposed to cab harnesses. Use Value: Enables compliance with ISO 10605 (15 kV) without degrading SENT pulse-edge rise time (<100 ns) due to ultra-low 4.3 pF loading. |
| FlexRay Bus Node | Automotive Body Control Module |
|
Use Scenario: Transient protection for FlexRay physical layer in chassis domain controllers requiring deterministic 10 Mbps operation. IC Role / Device Role / Timing Role: Common-cathode dual TVS placed adjacent to FlexRay transceiver RX/TX pins to suppress ESD-induced bit errors. Use Value: Maintains <0.5% duty-cycle distortion on 10 Mbps FlexRay signals while clamping 15 kV discharges to <65 V peak. |
Use Scenario: ESD safeguard for LIN/CAN mixed-bus body electronics in door modules and seat controllers. IC Role / Device Role / Timing Role: Shared-cathode protector applied to both CAN-L and LIN bus lines routed through same connector housing. Use Value: Reduces BOM count by consolidating two protection functions into one SOT323 device without compromising AEC-Q101 reliability. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-line automotive ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESD5V3U2U-2/TR | Lower VRWM (5.3 V), higher Cd (15 pF), same SOT323 package | Targeted for 3.3 V/5 V data lines (USB, I²C), not 24 V CAN-FD | Select only for low-voltage digital interfaces; unsuitable for 24 V bus protection due to premature conduction. |
| TPD2E001DRYR | 3.3 V VRWM, 10 pF Cd, dual-channel, DRY (SOT-553) package | Designed for portable electronics; lacks AEC-Q101 qualification and automotive thermal rating | Not recommended for automotive deployment; fails junction temperature (150 °C) and ESD test protocol validation. |
Compared with ESD5V3U2U-2/TR and TPD2E001DRYR, PESD2CANFD36UU-QF uniquely combines 36 V standoff, 4.3 pF capacitance, and AEC-Q101 qualification - making it the only option validated for CAN-FD and 24 V truck systems where high-voltage tolerance and low signal distortion are simultaneously required.
Availability
PESD2CANFD36UU-QF is available at Aetrix Electronics and suitable for automotive CAN-FD gateways, 24 V truck board net interfaces, and FlexRay bus nodes requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for PESD2CANFD36UU-QF includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability logic, discrete, and MOSFET solutions, headquartered in Nijmegen, Netherlands.
This device belongs to Nexperia's Automotive ESD Protection portfolio, engineered specifically for robust transient suppression on high-speed in-vehicle networks including CAN-FD, FlexRay, and SENT - balancing low capacitance, precise clamping, and AEC-Q101 compliance.
FAQ
What is the maximum junction temperature rating for PESD2CANFD36UU-QF?
The device is rated for a maximum junction temperature of 150 °C, verified per AEC-Q101 thermal stress tests including high-temperature reverse bias (HTRB) and temperature cycling. This enables reliable operation in under-hood environments where ambient temperatures reach 125 °C and power dissipation induces additional thermal rise.
Can PESD2CANFD36UU-QF protect both CANH and CANL simultaneously?
Yes - its dual-diode structure with independent cathodes (Pins 1 and 2) and shared cathode (Pin 3) allows simultaneous, symmetrical clamping of both CANH and CANL lines to ground. The matched 4.3 pF capacitance ensures equal signal delay, preserving differential integrity required for CAN-FD bit timing.
Is the 15 kV ESD rating applicable to both contact and air discharge?
The 15 kV rating applies specifically to IEC 61000-4-2 contact discharge testing. Air discharge performance is not specified in the datasheet; design-in should follow OEM requirements specifying contact discharge only, as is standard for automotive connector-level ESD validation.
Does PESD2CANFD36UU-QF require external biasing or control signals?
No - it is a passive, unidirectional TVS diode array with no control pins, supply rails, or enable logic. It operates solely based on voltage threshold conduction: clamping begins above 36 V VRWM and fully engages during ESD transients, requiring zero external circuitry or configuration.
PESD2CANFD36UU-QF Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- SC-70, SOT-323
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 2
- Voltage - Reverse Standoff (Typ):
- 36V
- Voltage - Breakdown (Min):
- -
- Voltage - Clamping (Max) @ Ipp:
- 45V
- Current - Peak Pulse (10/1000µs):
- 2A (8/20µs)
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- -
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-323
PESD2CANFD36UU-QF FAQ
1.How can I place an order for PESD2CANFD36UU-QF through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD2CANFD36UU-QF on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD2CANFD36UU-QF reliable?
The price and inventory of PESD2CANFD36UU-QF are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD2CANFD36UU-QF is usually 5 days.
3.What payment methods are accepted for PESD2CANFD36UU-QF?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD2CANFD36UU-QF transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD2CANFD36UU-QF?
PESD2CANFD36UU-QF orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD2CANFD36UU-QF order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD2CANFD36UU-QF?
For technical support, including PESD2CANFD36UU-QF datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD2CANFD36UU-QF requirements.
6.How does Aetrix verify that PESD2CANFD36UU-QF is sourced from the original manufacturer or authorized distributors?
All PESD2CANFD36UU-QF products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD2CANFD36UU-QF meets industry standards.
7.What is the process for return or replacement of PESD2CANFD36UU-QF?
All PESD2CANFD36UU-QF units undergo pre-shipment inspection (PSI). If there is an issue with PESD2CANFD36UU-QF, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD2CANFD36UU-QF part is unused and in its original packaging.
Return procedure for PESD2CANFD36UU-QF:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD2CANFD36UU-QF Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
