My Inquiry
My Account
Nexperia USA Inc. PESD5V0C1BLS-QYL
- Part No.:
- PESD5V0C1BLS-QYL
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- SOD-882
- Datasheet:
-
PESD5V0C1BLS-QYL.pdf
- Description:
- TVS DIODE 5VWM 5.4VC DFN1006BD-2
- Quantity:
- Payment:
- Shipping:
Inventory:20,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0C1BLS-Q from Nexperia is a bidirectional ESD protection diode in a DFN1006BD-2 (SOD882BD) package, designed for automotive in-vehicle network bus line protection. It delivers ultra-low 0.3 pF capacitance, 5 V reverse standoff voltage, and clamps transients to ≤5.4 V at 8 A TLP, enabling robust protection of high-speed interfaces like USB 3.2 and HDMI 2.0 without signal integrity degradation.
For engineers reviewing the PESD5V0C1BLS-Q datasheet, PESD5V0C1BLS-Q pinout, PESD5V0C1BLS-Q application, or PESD5V0C1BLS-Q equivalent, this device is selected for ultra-low-capacitance, AEC-Q101-qualified ESD protection on bidirectional differential lines where dynamic resistance (0.35 Ω), deep snap-back behavior, and side-wettable flanks for automated optical inspection are critical design requirements.
Technical Context
This device implements a deep snap-back clamping structure with negative dynamic resistance, enabling rapid transition into low-voltage clamping mode during ESD events. Its bidirectional architecture supports ±15 kV IEC 61000-4-2 and ISO 10605 contact discharge, while maintaining sub-1 nA leakage at 5 V VRWM.
The DFN1006BD-2 package integrates side-wettable flanks for solder-joint inspection and achieves 0.3 pF capacitance measured between pins 1 and 2 at 1 MHz and 0 V bias - essential for preserving signal integrity on >5 Gbps data lanes in automotive A/V systems.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage (VRWM) | 5 V - Ensures no conduction during normal operation of 3.3 V/5 V automotive data buses. |
| Clamping Voltage (VCL) | 5.4 V at 8 A TLP - Limits transient overvoltage to safe levels for downstream PHYs and controllers. |
| Diode Capacitance (Cd) | 0.3 pF - Minimizes signal distortion and insertion loss on USB 3.2 Gen 1/2 and HDMI 2.0 channels. |
| Dynamic Resistance (Rdyn) | 0.35 Ω - Sustains low clamping voltage under fast-rising ESD pulses via snap-back conduction. |
| ESD Withstand (IEC 61000-4-2) | ±15 kV contact discharge - Meets automotive OEM immunity requirements for infotainment and ADAS interfaces. |
| Ambient Temperature Range | −55 °C to +150 °C - Supports placement near engine bays, powertrain ECUs, and display modules. |
Pinout & Package
Package: DFN1006BD-2 (SOD882BD), 1.0 mm × 0.6 mm × 0.47 mm body, 0.65 mm pitch, side-wettable flanks for AOI-compatible reflow.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | K1 (Cathode 1) | Anode referenced to ground for negative transient clamping; forms one half of bidirectional path. |
| 2 | K2 (Cathode 2) | Anode referenced to ground for positive transient clamping; completes symmetrical ESD path across both polarities. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping architecture | Enables protection of AC-coupled or differential lines (e.g., LVDS, USB D+/D−) without polarity constraints. |
| Deep snap-back trigger | Reduces clamping voltage rapidly after breakdown, minimizing energy dissipation in protected ICs during ESD events. |
| Side-wettable flanks | Supports automated optical inspection of solder joints in high-reliability automotive PCB assembly. |
| AEC-Q101 qualification | Validated for automotive use per stress test standard, including temperature cycling, HTRB, and ESD robustness. |
Applications
| USB 3.2 Gen 1 Interface | HDMI 2.0 Automotive Link |
|---|---|
|
Use Scenario: High-speed data transmission between head unit and rear-seat entertainment display. IC Role / Device Role / Timing Role: ESD protection element placed directly at HDMI connector, shunting transients before reaching SerDes PHY. Use Value: 0.3 pF capacitance prevents signal rise-time degradation and maintains eye diagram compliance at 6 Gbps. |
Use Scenario: Video streaming from camera module to ADAS processor over long cable harnesses. IC Role / Device Role / Timing Role: Bidirectional transient suppressor on TMDS clock/data pairs, referenced to chassis ground. Use Value: 5.4 V clamping voltage ensures HDMI receiver input remains below absolute maximum rating during 15 kV ESD strikes. |
| Automotive LVDS Display Bus | In-Vehicle Camera Serial Link |
|
Use Scenario: Pixel data transmission from instrument cluster MCU to TFT LCD panel. IC Role / Device Role / Timing Role: Low-capacitance ESD clamp on LVDS differential pair, mounted adjacent to display connector. Use Value: Sub-1 nA leakage at 5 V VRWM avoids DC offset accumulation that could destabilize LVDS common-mode voltage. |
Use Scenario: GMSL or FPD-Link III serial video interface from surround-view camera to domain controller. IC Role / Device Role / Timing Role: Primary ESD protection on bidirectional control/data channel, qualified for 150 °C ambient operation. Use Value: −55 °C to +150 °C operating range enables placement directly behind camera housing without thermal derating. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor ESDBLE5.0D1W | 0.5 pF capacitance, 6.5 V clamping at 8 A, same DFN1006 package but no side-wettable flanks. | Lacks AEC-Q101 qualification; rated only for industrial temp range (−40 °C to +125 °C). | Select when cost sensitivity outweighs automotive qualification and ultra-low capacitance requirements. |
| Vishay VEML6030X01 | 0.25 pF capacitance, but unidirectional configuration requiring dual-device layout; 5.5 V clamping. | Requires two devices per line and external biasing for bidirectional operation - increases BOM count and PCB area. | Choose only if system-level design permits asymmetric protection and additional layout complexity. |
Compared with ESDBLE5.0D1W and VEML6030X01, PESD5V0C1BLS-Q uniquely combines AEC-Q101 qualification, side-wettable flanks for automotive manufacturing traceability, and 0.3 pF capacitance in a single bidirectional device - reducing component count and enabling direct replacement at HDMI/USB connectors without redesign.
Availability
PESD5V0C1BLS-Q is available at Aetrix Electronics and suitable for automotive infotainment, ADAS camera links, and in-vehicle display interfaces requiring stable component supply, full AEC-Q101 compliance, and production-ready DFN1006BD-2 packaging with side-wettable flanks.
Supply support for PESD5V0C1BLS-Q includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in ESD protection, MOSFETs, and bipolar transistors.
PESD5V0C1BLS-Q belongs to the TrEOS Protection family, engineered specifically for ultra-low-capacitance, AEC-Q101-qualified ESD suppression on high-speed automotive data buses including USB, HDMI, and LVDS.
FAQ
What is the maximum peak pulse current the PESD5V0C1BLS-Q can handle?
The device is rated for 6.5 A peak pulse current under 8/20 μs waveform per IEC 61000-4-5. This value reflects its capability to absorb surge energy without failure, validated during AEC-Q101 qualification testing and confirmed in the datasheet's limiting values table.
Does PESD5V0C1BLS-Q require external biasing for bidirectional operation?
No external biasing is required. The device uses an intrinsic symmetric snap-back structure with cathodes on both terminals (pins 1 and 2), enabling automatic conduction during either positive or negative transients relative to ground - ideal for AC-coupled differential signals.
How does the side-wettable flank feature benefit automotive manufacturing?
Side-wettable flanks allow automated optical inspection (AOI) systems to verify solder joint quality on the package edges post-reflow, eliminating reliance on X-ray for hidden-joint validation - a critical requirement for zero-defect automotive PCB assembly processes.
Can PESD5V0C1BLS-Q be used on 12 V automotive power lines?
No. With a 5 V reverse standoff voltage and 7.5 V minimum breakdown voltage, it is unsuitable for 12 V supply rail protection. It is strictly intended for signal-line protection on low-voltage, high-speed data interfaces such as USB, HDMI, and LVDS within automotive domains.
PESD5V0C1BLS-QYL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- SOD-882
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 7.5V
- Voltage - Clamping (Max) @ Ipp:
- 5.4V (Typ)
- Current - Peak Pulse (10/1000µs):
- 6.5A (8/20µs)
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- HDMI, USB
- Capacitance @ Frequency:
- 0.3pF @ 1MHz (Max)
- Operating Temperature:
- -55°C ~ 150°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DFN1006BD-2
PESD5V0C1BLS-QYL FAQ
1.How can I place an order for PESD5V0C1BLS-QYL through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0C1BLS-QYL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0C1BLS-QYL reliable?
The price and inventory of PESD5V0C1BLS-QYL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0C1BLS-QYL is usually 5 days.
3.What payment methods are accepted for PESD5V0C1BLS-QYL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0C1BLS-QYL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0C1BLS-QYL?
PESD5V0C1BLS-QYL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0C1BLS-QYL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0C1BLS-QYL?
For technical support, including PESD5V0C1BLS-QYL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0C1BLS-QYL requirements.
6.How does Aetrix verify that PESD5V0C1BLS-QYL is sourced from the original manufacturer or authorized distributors?
All PESD5V0C1BLS-QYL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0C1BLS-QYL meets industry standards.
7.What is the process for return or replacement of PESD5V0C1BLS-QYL?
All PESD5V0C1BLS-QYL units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0C1BLS-QYL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0C1BLS-QYL part is unused and in its original packaging.
Return procedure for PESD5V0C1BLS-QYL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0C1BLS-QYL Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
