My Inquiry
My Account
Nexperia USA Inc. PESD5V0C1BZFYL
- Part No.:
- PESD5V0C1BZFYL
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- -
- Datasheet:
-
PESD5V0C1BZFYL.pdf
- Description:
- PESD5V0C1B - TRANS VOLTAGE SUPPR
- Quantity:
- Payment:
- Shipping:
Inventory:583,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0C1BZFYL from Nexperia is a bidirectional ESD protection diode in a DSN0603-2 (SOD962-2) ultra-small leadless SMD package, rated for ±20 kV IEC 61000-4-2 contact discharge, with 0.2 pF typical capacitance at 1 MHz and 5 V reverse standoff voltage. It safeguards single high-speed data lines in portable electronics interfaces.
For engineers reviewing the PESD5V0C1BZFYL datasheet, PESD5V0C1BZFYL pinout, PESD5V0C1BZFYL application, or PESD5V0C1BZFYL equivalent, key selection criteria include ultra-low capacitance for signal integrity, bidirectional clamping behavior, IEC-rated ESD robustness, and compatibility with space-constrained PCB layouts near connectors.
Technical Context
This device implements a dual-cathode bidirectional TVS structure optimized for transient suppression on AC-coupled or bipolar signal lines-no DC bias path required. Its dynamic resistance of 0.23 Ω (TLP, 100 ns) ensures low clamping voltage under fast ESD pulses.
Clamping performance is characterized at both polarities: +4.6 V at 8 A TLP and –3.8 V at 8 A TLP, with peak pulse current rating of 9 A (8/20 µs). Capacitance remains stable below 0.25 pF up to 2.5 GHz, enabling use on USB 3.0, HDMI, MIPI, and LPDDR interfaces.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5 V - Maximum continuous working voltage before leakage rises; defines safe operating margin for 3.3 V or 5 V interface lines. |
| Diode Capacitance | 0.2 pF (typ) at 1 MHz - Enables minimal signal distortion on >1 Gbps differential links without equalization overhead. |
| ESD Rating | ±20 kV IEC 61000-4-2 contact - Meets highest industrial and consumer ESD immunity requirements without external circuitry. |
| Clamping Voltage | +4.6 V / –3.8 V at 8 A TLP - Limits transient overvoltage to sub-5 V levels, protecting downstream 1.8 V/3.3 V IC inputs. |
| Peak Pulse Current | 9 A (8/20 µs) - Handles surge energy from IEC 61000-4-5 Level 3 (1 kV) indirectly via system-level coupling paths. |
| Dynamic Resistance | 0.23 Ω - Low impedance during ESD event ensures rapid voltage collapse and minimal energy dissipation in protected IC. |
Pinout & Package
DSN0603-2 (SOD962-2) is a 2-terminal, leadless, ultra-compact surface-mount package measuring 0.6 mm × 0.3 mm × 0.3 mm with 0.4 mm pitch. Its low-profile construction supports automated placement and reflow in fine-pitch mobile PCB assemblies.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Cathode (Diode 1) | Forms one half of the bidirectional clamp; connects to protected line when referenced to ground. |
| 2 | Cathode (Diode 2) | Completes symmetrical clamp structure; enables conduction for both positive and negative transients. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping | Enables protection of AC-coupled or floating signal lines without polarity constraints or DC blocking capacitors. |
| 0.2 pF capacitance | Maintains signal integrity on >5 Gbps serial interfaces (e.g., USB 3.2 Gen 2, PCIe Gen 3) with negligible insertion loss. |
| ±20 kV ESD robustness | Eliminates need for secondary protection stages in handheld and wearable designs meeting IEC 61000-4-2 Level 4. |
| DSN0603-2 footprint | Reduces PCB area by >60% vs. SOD-523; compatible with 0201 pick-and-place equipment and high-density routing. |
Applications
| USB 3.0/3.1 SuperSpeed Interface | HDMI 2.0 Differential Pairs |
|---|---|
|
Use Scenario: ESD protection on TX/RX differential lanes between SoC and connector in ultrabooks and docking stations. IC Role / Device Role: Bidirectional transient suppressor placed within 3 mm of HDMI Type-A receptacle. Use Value: Prevents latch-up or gate oxide damage in SerDes PHYs while adding <0.05 dB insertion loss at 6 GHz. |
Use Scenario: Clamping induced surges on HDMI source-side TMDS channels exposed to user-handling events. IC Role / Device Role: Line-to-ground ESD shunt mounted directly at PCB edge connector pads. Use Value: Maintains eye diagram compliance per HDMI 2.0 spec under ±15 kV air discharge stress testing. |
| MIPI D-PHY Camera Link | LPDDR4/5 Command/Address Bus |
|
Use Scenario: Protecting 1.2 Gbps MIPI D-PHY lanes between image sensor and application processor in smartphones. IC Role / Device Role: Single-line bidirectional protector on each differential pair, minimizing trace stub length. Use Value: Achieves <0.15 UI jitter increase at 1.5 GHz while surviving 20 kV contact ESD per IEC 61000-4-2. |
Use Scenario: Guarding multi-bit CA bus lines against board-level ESD coupling during module insertion or handling. IC Role / Device Role: Per-line protection element placed adjacent to DRAM package ball-out region. Use Value: Ensures memory controller reset immunity and eliminates boot-time CRC failures after repeated ESD exposure. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NUP4105MR6T1G | 0.8 pF capacitance; ±15 kV ESD rating; SOT-563 package (1.6 mm × 1.6 mm) | Larger footprint; higher capacitance limits use to ≤480 Mbps interfaces (e.g., USB 2.0) | Select when cost sensitivity outweighs RF performance and board space constraints. |
| Vishay VEML3010 | 0.35 pF capacitance; ±12 kV ESD rating; SC-70 package (2.0 mm × 1.25 mm) | Lower ESD rating and larger size reduce suitability for premium mobile designs requiring Level 4 immunity. | Prefer for legacy industrial control panels where layout density is less critical than long-term supply stability. |
Compared with NUP4105MR6T1G and VEML3010, PESD5V0C1BZFYL delivers 75% lower capacitance and 33% higher ESD rating in a package occupying <10% of their PCB area-making it optimal for next-generation high-speed, space-constrained portable interfaces.
Availability
PESD5V0C1BZFYL is available at Aetrix Electronics and suitable for USB 3.x host ports, MIPI camera modules, and LPDDR memory subsystems requiring stable component supply across high-mix, low-volume production runs.
Supply support for PESD5V0C1BZFYL includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert delivering high-performance, reliable discrete, logic, and MOSFET devices with focus on efficiency, reliability, and miniaturization.
PESD5V0C1BZFYL belongs to the TrEOS Protection family-engineered specifically for ultra-high-speed digital interface protection where sub-0.3 pF capacitance and ±20 kV ESD immunity are mandatory.
FAQ
Can PESD5V0C1BZFYL be used on power rails?
No. This device is designed exclusively for signal-line protection and must not be connected to DC power supplies. Its breakdown voltage starts at 6 V, and sustained reverse bias above 5 V increases leakage current beyond specification. Application guidance explicitly prohibits use on lines connected to a DC supply.
What is the recommended PCB layout for optimal ESD performance?
Place PESD5V0C1BZFYL within 3 mm of the protected connector, minimize trace length to ground (ideally <5 mm), use dedicated low-inductance ground vias adjacent to Pin 1 and Pin 2, and avoid routing unprotected traces parallel to protected ones. Ground plane continuity beneath the device is essential for effective transient return path.
How does its 0.2 pF capacitance impact 5 Gbps differential signaling?
At 2.5 GHz (Nyquist frequency of 5 Gbps NRZ), 0.2 pF introduces <0.03 dB insertion loss and <0.05° phase shift-well below thresholds that degrade eye height or jitter budget. Measurement data (Fig. 5–6) confirms flat capacitance response up to 8 GHz, preserving signal fidelity.
Is PESD5V0C1BZFYL automotive-qualified?
No. This part is not qualified to AEC-Q200 or any automotive standard. Nexperia's legal disclaimers explicitly state non-automotive qualification, and no automotive test reports or qualification documentation are published for this device. Use in automotive applications is unsupported and at customer's own risk.
PESD5V0C1BZFYL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- -
- Series:
- *
- Packaging:
- Bulk
- Product Status:
- Active
- Type:
- -
- Unidirectional Channels:
- -
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- -
- Voltage - Breakdown (Min):
- -
- Voltage - Clamping (Max) @ Ipp:
- -
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- -
- Applications:
- -
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
PESD5V0C1BZFYL FAQ
1.How can I place an order for PESD5V0C1BZFYL through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0C1BZFYL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0C1BZFYL reliable?
The price and inventory of PESD5V0C1BZFYL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0C1BZFYL is usually 5 days.
3.What payment methods are accepted for PESD5V0C1BZFYL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0C1BZFYL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0C1BZFYL?
PESD5V0C1BZFYL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0C1BZFYL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0C1BZFYL?
For technical support, including PESD5V0C1BZFYL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0C1BZFYL requirements.
6.How does Aetrix verify that PESD5V0C1BZFYL is sourced from the original manufacturer or authorized distributors?
All PESD5V0C1BZFYL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0C1BZFYL meets industry standards.
7.What is the process for return or replacement of PESD5V0C1BZFYL?
All PESD5V0C1BZFYL units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0C1BZFYL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0C1BZFYL part is unused and in its original packaging.
Return procedure for PESD5V0C1BZFYL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0C1BZFYL Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
