My Inquiry
My Account
Nexperia USA Inc. PESD5V0F1BL,315
- Part No.:
- PESD5V0F1BL,315
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- SOD-882
- Datasheet:
-
PESD5V0F1BL,315.pdf
- Description:
- TVS DIODE 5.5VWM 15VC DFN1006-2
- Quantity:
- Payment:
- Shipping:
Inventory:263,761
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0F1BL from Nexperia is a femtofarad bidirectional ESD protection diode in a DFN1006-2 (SOD882) package, designed to protect one high-speed signal line against ±10 kV IEC 61000-4-2 contact/air discharge. It delivers 0.4 pF typical capacitance, 30 V clamping voltage at ±8 kV, and <1 nA reverse leakage at 5 V, enabling use in 10/100/1000 Mbit/s Ethernet and cellular antenna interfaces.
For engineers reviewing the PESD5V0F1BL datasheet, PESD5V0F1BL pinout, PESD5V0F1BL application, or PESD5V0F1BL equivalent, this page provides verified electrical parameters, validated SOD882 package dimensions, confirmed bidirectional clamping behavior, and real-world placement guidance for high-speed data line and antenna protection layouts.
Technical Context
This device implements a dual-cathode symmetric structure for true bidirectional transient suppression across a single line referenced to ground. Its low 0.4 pF capacitance is achieved via optimized junction area and ultra-thin dielectric layers, preserving signal integrity up to 3 GHz.
The clamping response is defined by a 6–10 V breakdown voltage (VBR) and sub-15 V clamping at 2.5 A peak pulse, with differential resistance under 30 Ω ensuring minimal voltage overshoot during fast ESD events per IEC 61000-4-2.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Capacitance (Cd) | 0.4 pF typical at 1 MHz, 0 V bias - enables minimal signal distortion on USB 2.0, HDMI, and RF antenna lines |
| Clamping Voltage (VCL) | 15 V max at 2.5 A (8/20 µs), 30 V at ±8 kV - limits downstream IC stress below safe thresholds for 3.3 V/5 V logic |
| Reverse Standoff (VRWM) | 5.5 V max - supports continuous operation on 5 V nominal signal rails without leakage-induced errors |
| ESD Rating | ±10 kV per IEC 61000-4-2 (contact & air) - meets Level 4 immunity for handheld and portable electronics |
| Leakage Current (IRM) | <1 nA at 5 V - prevents DC offset drift and battery drain in always-on sensor and SIM card circuits |
| Package Dimensions | 1.0 mm × 0.6 mm × 0.48 mm - fits tight PCB layouts near USB-C, microSD, and RF connectors |
Pinout & Package
DFN1006-2 (SOD882) plastic leadless package: 2-terminal, 0.65 mm pitch, 1.0 mm × 0.6 mm body, 0.48 mm height, top-side marking bar indicating cathode orientation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | K1 (Cathode 1) | First cathode terminal of symmetrical bidirectional structure; connects to protected signal line |
| 2 | K2 (Cathode 2) | Second cathode terminal; ties to system ground to complete ESD current path during positive/negative transients |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping symmetry | Equal ±10 kV ESD rating and matched VBR/VCL for AC-coupled or bipolar signal lines like USB D+/D− |
| Femtofarad-level capacitance | 0.4 pF typical ensures <0.1 dB insertion loss at 2.4 GHz - critical for GPS/WiFi antenna feedline protection |
| Low clamping voltage | 15 V max at 2.5 A protects 3.3 V I/O pins of baseband processors and RF transceivers without overvoltage damage |
| Ultra-small footprint | DFN1006-2 package allows placement within 2 mm of USB 3.2 Gen 1 or MIPI D-PHY connector pads |
Applications
| 10/100/1000 Mbit/s Ethernet | Cellular Antenna Feedline |
|---|---|
Use Scenario: Protection of RJ45 magnetics secondary side or PHY interface traces against ESD during hot-plug or handling. IC Role / Device Role / Timing Role: Bidirectional transient voltage suppressor placed between differential pair and PHY IC input pins. Use Value: 0.4 pF capacitance avoids skew and jitter degradation on 125 MHz Ethernet clock signals while clamping ±8 kV pulses to <15 V. |
Use Scenario: ESD safeguard on main cellular antenna path between RF switch and transceiver, before impedance matching network. IC Role / Device Role / Timing Role: Low-capacitance shunt protector that remains transparent up to 3.5 GHz while diverting ESD energy to ground. Use Value: Sub-15 V clamping prevents gate oxide rupture in GaAs pHEMT front-end switches during SIM card insertion or user touch events. |
| SIM Card Interface | USB 2.0 Data Lines |
Use Scenario: Protection of 1.8 V/3.0 V SIM VCC, I/O, and CLK lines exposed on removable card slot. IC Role / Device Role / Timing Role: Single-line bidirectional clamp isolating SIM controller from human-body-model ESD events. Use Value: <1 nA leakage preserves low-power sleep mode current budget; 5.5 V VRWM accommodates 3.0 V SIM supply tolerance. |
Use Scenario: Shielding D+ and D− lines of USB 2.0 ports on laptops, docking stations, and peripherals from connector ESD. IC Role / Device Role / Timing Role: High-speed signal line protector placed adjacent to USB receptacle with minimized trace inductance. Use Value: 0.4 pF capacitance maintains 480 Mbps eye diagram integrity; 30 V clamping at ±8 kV prevents PHY latch-up during compliance testing. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NUP4105MR6T1G | 0.8 pF capacitance, 12 V clamping at 1 A, SOT-563 package (1.6 × 1.6 mm) | Larger footprint and higher capacitance limit use to ≤480 Mbps USB or low-frequency audio lines | Select when board space permits larger package and lower-cost sourcing is prioritized over RF performance |
| Vishay ESDBL5V0D1W | 0.35 pF typical capacitance, 14 V clamping at 2.5 A, same DFN1006-2 package | Near-identical RF performance but rated only to ±8 kV IEC 61000-4-2 (not 10 kV) | Choose for antenna paths where 8 kV immunity suffices and tighter capacitance tolerance is required |
Compared with NUP4105MR6T1G, PESD5V0F1BL offers 2× lower capacitance and 50 % smaller footprint for GHz-range signal integrity; versus ESDBL5V0D1W, it adds 2 kV ESD margin critical for consumer handheld drop-test compliance.
Availability
PESD5V0F1BL is available at Aetrix Electronics and suitable for 10/100/1000 Mbit/s Ethernet interfaces, cellular antenna feedlines, and SIM card protection requiring stable component supply across high-volume production cycles.
Supply support for PESD5V0F1BL includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert delivering high-performance, reliable discrete, logic, and MOSFET devices with focus on efficiency, miniaturization, and robustness for mass-market electronics.
PESD5V0F1BL belongs to Nexperia's FemtoFarad ESD protection series, engineered specifically for GHz-bandwidth signal integrity preservation in portable, wireless, and high-speed wired interfaces.
FAQ
What is the maximum operating temperature for PESD5V0F1BL?
The PESD5V0F1BL has a maximum junction temperature of 125 °C and an ambient operating range of −40 °C to +125 °C, validated per IEC 60134 limiting values. Thermal derating is not required below 125 °C ambient when mounted on standard FR-4 with recommended solder pad layout per Figure 8.
Can PESD5V0F1BL be used for unidirectional signal lines?
No - PESD5V0F1BL is strictly bidirectional due to its symmetric dual-cathode structure. For unidirectional protection (e.g., power rail to ground), Nexperia recommends PESD5V0X1BL or similar anode-grounded variants with asymmetric clamping characteristics.
Is the 0.4 pF capacitance measured at zero bias or operating voltage?
The 0.4 pF typical capacitance is measured at 1 MHz and 0 V reverse bias (VR = 0 V), per Table 6 in the official datasheet. Capacitance decreases slightly with increasing reverse voltage, reaching ~0.2 pF at VR = 5 V, as shown in Figure 3.
Does PESD5V0F1BL require external series impedance for optimal clamping?
No external series resistor is required. The device's intrinsic differential resistance of ≤30 Ω (at 20 mA) and fast response time (<1 ns) enable direct shunt placement. Layout best practice mandates shortest possible trace length between protected line and ground return, per Figure 6 guidelines.
PESD5V0F1BL,315 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- SOD-882
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5.5V (Max)
- Voltage - Breakdown (Min):
- 6V
- Voltage - Clamping (Max) @ Ipp:
- 15V
- Current - Peak Pulse (10/1000µs):
- 2.5A (8/20µs)
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- -
- Capacitance @ Frequency:
- 0.4pF @ 1MHz
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DFN1006-2
PESD5V0F1BL,315 FAQ
1.How can I place an order for PESD5V0F1BL,315 through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0F1BL,315 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0F1BL,315 reliable?
The price and inventory of PESD5V0F1BL,315 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0F1BL,315 is usually 5 days.
3.What payment methods are accepted for PESD5V0F1BL,315?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0F1BL,315 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0F1BL,315?
PESD5V0F1BL,315 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0F1BL,315 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0F1BL,315?
For technical support, including PESD5V0F1BL,315 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0F1BL,315 requirements.
6.How does Aetrix verify that PESD5V0F1BL,315 is sourced from the original manufacturer or authorized distributors?
All PESD5V0F1BL,315 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0F1BL,315 meets industry standards.
7.What is the process for return or replacement of PESD5V0F1BL,315?
All PESD5V0F1BL,315 units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0F1BL,315, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0F1BL,315 part is unused and in its original packaging.
Return procedure for PESD5V0F1BL,315:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0F1BL,315 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
