My Inquiry
My Account
Nexperia USA Inc. PESD5V0F1BLD,315
- Part No.:
- PESD5V0F1BLD,315
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- 2-XDFN
- Datasheet:
-
PESD5V0F1BLD,315.pdf
- Description:
- TVS DIODE 5.5VWM 15VC DFN1006D-2
- Quantity:
- Payment:
- Shipping:
Inventory:106,849
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0F1BLD from Nexperia is a femtofarad bidirectional ESD protection diode in a DFN1006D-2 (SOD882D) package, designed to protect a single high-speed signal line against ±10 kV IEC 61000-4-2 contact/air discharge. It delivers 0.4 pF typical capacitance, 30 V clamping voltage at ±8 kV, and 1 nA reverse leakage at 5 V, enabling use in 10/100/1000 Mbit/s Ethernet and antenna interfaces.
For engineers reviewing the PESD5V0F1BLD datasheet, PESD5V0F1BLD pinout, PESD5V0F1BLD application, or PESD5V0F1BLD equivalent, key selection criteria include ultra-low capacitance for signal integrity, low clamping voltage for downstream IC protection, side-wettable flanks for solder inspection, and compatibility with high-speed data lines requiring sub-1 pF loading.
Technical Context
This bidirectional TVS diode uses dual-cathode symmetric structure (Pin 1 = K1, Pin 2 = K2) to clamp transients of either polarity without DC bias dependency. Its 0.4 pF capacitance at 1 MHz and 0 V bias ensures minimal signal distortion on RF and high-speed digital lines up to 1 GHz.
The device operates within ±5.5 V reverse standoff range and clamps to ≤15 V under 2.5 A 8/20 µs surge, with dynamic resistance of 1.5 Ω. It meets IEC 61000-4-2 Level 4 and MIL-STD-883 HBM (10 kV), targeting transient suppression where PCB layout constraints demand minimal parasitic inductance and footprint.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Capacitance | 0.4 pF typical at 1 MHz, 0 V - preserves signal integrity on >500 MHz data lines |
| Clamping Voltage | 15 V max at 2.5 A 8/20 µs - limits stress on downstream PHY or RF front-end ICs |
| ESD Rating | ±10 kV IEC 61000-4-2 contact/air - exceeds industrial immunity requirements |
| Reverse Standoff | 5.5 V max - compatible with 3.3 V and 5 V logic and interface rails |
| Leakage Current | 1 nA typical at 5 V - avoids DC loading on sensitive analog or RF paths |
| Package Size | 1.0 × 0.6 × 0.37 mm - enables placement adjacent to connectors on dense RF modules |
Pinout & Package
DFN1006D-2 (SOD882D) is a leadless, ultra-small surface-mount package with side-wettable flanks (SWF), 0.65 mm pitch, and visible solderable side pads for automated optical inspection (AOI). Body dimensions: 1.0 mm × 0.6 mm × 0.37 mm (typ).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Cathode (Diode 1) | Forms one half of symmetrical bidirectional clamping path; connects to protected line |
| 2 | Cathode (Diode 2) | Completes symmetrical clamping path; ties to ground reference for transient return |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional clamping | Enables protection of AC-coupled or floating signal lines without polarity constraints |
| Femtofarad-level capacitance | 0.4 pF minimizes insertion loss and group delay on USB 2.0, HDMI, or cellular antenna feeds |
| Side-wettable flanks | Supports automated X-ray and AOI verification of solder joint quality in high-reliability assembly |
| Low clamping voltage | 30 V at ±8 kV ESD ensures safe operation margin below 3.3 V/5 V IC absolute maximum ratings |
Applications
| 10/100/1000 Mbit/s Ethernet | Cellular Antenna Feed |
|---|---|
Use Scenario: Protection of RJ45 magnetics secondary side or PHY differential pairs against ESD during hot-plug or handling. IC Role / Device Role / Timing Role: Transient voltage suppressor placed directly at connector entry point to shunt ESD energy before reaching Ethernet controller. Use Value: 0.4 pF capacitance prevents signal rise-time degradation on 100BASE-TX and 1000BASE-T differential lanes. |
Use Scenario: ESD safeguarding of LTE/5G antenna switch or LNA input in smartphone mainboard or module. IC Role / Device Role / Timing Role: Bidirectional clamping element between antenna feedline and RF front-end IC, referenced to system ground. Use Value: Sub-1 pF loading avoids detuning of matching networks and maintains S11 performance across 700 MHz–6 GHz bands. |
| SIM Card Interface | High-Speed USB 2.0 Data Lines |
Use Scenario: Protection of SIM VCC, I/O, and CLK pins against user-handling ESD in portable devices. IC Role / Device Role / Timing Role: Low-leakage (1 nA) ESD clamp ensuring no DC loading on SIM card power and data lines. Use Value: 5.5 V VRWM allows direct placement on 3 V SIM supply rail without blocking conduction. |
Use Scenario: Signal-line protection on USB 2.0 D+ and D− traces near Type-A or micro-B connectors. IC Role / Device Role / Timing Role: Ultra-low-capacitance TVS placed immediately upstream of USB transceiver PHY. Use Value: Clamping voltage ≤15 V at 2.5 A surge protects PHY I/O cells rated for 3.6 V absolute max. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor ESDE0402MUTAG | 0.35 pF typ, 12 V clamping at 1 A, 5.5 V VRWM, same DFN1006 package | Lower clamping voltage but lower surge rating (1 A vs 2.5 A); less robust for repeated ESD events | Select when lowest possible capacitance is critical and peak surge current remains <1 A |
| Vishay VEML6030X01 | 0.5 pF typ, 14 V clamping at 2 A, 5.5 V VRWM, DFN1006-2 package | Higher capacitance and lower surge rating; lacks side-wettable flanks for AOI | Choose only if SWF inspection is not required and 0.1 pF higher capacitance is acceptable |
Compared with ESDE0402MUTAG and VEML6030X01, PESD5V0F1BLD provides the optimal balance of ultra-low capacitance (0.4 pF), high surge capability (2.5 A), and manufacturable side-wettable flanks-making it preferred for high-volume, high-frequency consumer and telecom designs requiring full process traceability.
Availability
PESD5V0F1BLD is available at Aetrix Electronics and suitable for 10/100/1000 Mbit/s Ethernet, cellular antenna feed, and SIM card interface applications requiring stable component supply, consistent parametric performance, and long-term production continuity.
Supply support for PESD5V0F1BLD includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert delivering high-performance, reliable discrete, logic, and MOSFET devices, with leadership in ESD protection and automotive-qualified components.
PESD5V0F1BLD belongs to Nexperia's FemtoFarad ESD protection product line, engineered specifically for high-speed data and RF signal line protection where sub-0.5 pF capacitance and repeatable ±10 kV ESD immunity are mandatory.
FAQ
What is the maximum operating temperature for PESD5V0F1BLD?
The junction temperature limit is 125 °C, and ambient operating range is −40 °C to +125 °C per the datasheet limiting values table. This allows deployment in extended-temperature industrial and automotive-adjacent environments, provided PCB thermal design maintains Tj ≤ 125 °C under worst-case surge conditions.
Does PESD5V0F1BLD require external biasing or orientation during layout?
No external bias is needed-the device is inherently bidirectional due to its dual-cathode symmetric structure. Orientation is non-critical: both pins connect to the protected line and ground respectively, with no anode/cathode polarity constraint. The marking bar ('H') indicates cathode side but does not affect function in this configuration.
Can PESD5V0F1BLD be used on 5 V USB 3.0 SuperSpeed lines?
No-it is not recommended for USB 3.0 (5 Gbps) due to insufficient bandwidth margin; its 0.4 pF capacitance yields ~80 Ω impedance at 5 GHz, causing measurable insertion loss. It is validated for USB 2.0 (480 Mbps) and lower-speed interfaces like Ethernet and SIM card lines where bandwidth demands are ≤1 GHz.
How does the side-wettable flank (SWF) feature improve manufacturing yield?
The SWF design exposes solderable metal on the package side walls, enabling automated optical inspection (AOI) and X-ray systems to verify solder fillet formation and wetting quality-critical for detecting head-in-pillow or insufficient solder defects in fine-pitch DFN assembly, thereby reducing field failure rates in high-reliability consumer products.
PESD5V0F1BLD,315 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- 2-XDFN
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5.5V (Max)
- Voltage - Breakdown (Min):
- 6V
- Voltage - Clamping (Max) @ Ipp:
- 15V
- Current - Peak Pulse (10/1000µs):
- 2.5A (8/20µs)
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- -
- Capacitance @ Frequency:
- 0.4pF @ 1MHz
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount, Wettable Flank
- Supplier Device Package:
- DFN1006D-2
PESD5V0F1BLD,315 FAQ
1.How can I place an order for PESD5V0F1BLD,315 through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0F1BLD,315 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0F1BLD,315 reliable?
The price and inventory of PESD5V0F1BLD,315 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0F1BLD,315 is usually 5 days.
3.What payment methods are accepted for PESD5V0F1BLD,315?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0F1BLD,315 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0F1BLD,315?
PESD5V0F1BLD,315 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0F1BLD,315 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0F1BLD,315?
For technical support, including PESD5V0F1BLD,315 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0F1BLD,315 requirements.
6.How does Aetrix verify that PESD5V0F1BLD,315 is sourced from the original manufacturer or authorized distributors?
All PESD5V0F1BLD,315 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0F1BLD,315 meets industry standards.
7.What is the process for return or replacement of PESD5V0F1BLD,315?
All PESD5V0F1BLD,315 units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0F1BLD,315, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0F1BLD,315 part is unused and in its original packaging.
Return procedure for PESD5V0F1BLD,315:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0F1BLD,315 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
