My Inquiry
My Account
Nexperia USA Inc. PESD5V0L5UYF
- Part No.:
- PESD5V0L5UYF
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- 6-TSSOP, SC-88, SOT-363
- Datasheet:
-
PESD5V0L5UYF.pdf
- Description:
- TVS DIODE 5VWM 12VC 6TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:9,361
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0L5UYF from Nexperia is a unidirectional five-channel ESD protection diode array in SOT363 (SC-88) package, rated for 5.0 V reverse standoff voltage, 16–19 pF typical diode capacitance at 1 MHz, 5 nA max reverse leakage current, 12 V clamping voltage at 2.5 A surge, and 20 kV IEC 61000-4-2 contact ESD immunity - deployed to safeguard high-speed data lines in portable electronics interfaces.
For engineers reviewing the PESD5V0L5UYF datasheet, PESD5V0L5UYF pinout, PESD5V0L5UYF application, or PESD5V0L5UYF equivalent, key selection criteria include low-capacitance signal-line protection, common-anode unidirectional topology, SC-88 footprint compatibility, and compliance with IEC 61000-4-2 Level 4 and IEC 61000-4-5 surge standards.
Technical Context
This device integrates five identical unidirectional ESD protection diodes sharing a common anode terminal (Pin 2), enabling simultaneous clamping of up to five positive-polarity signal lines against transients. Its architecture supports single-rail protection without polarity inversion or bidirectional conduction.
Clamping occurs via avalanche breakdown above 6.4–7.2 V (VBR), delivering 12 V maximum clamping at 2.5 A (8/20 µs), with differential resistance ≤100 Ω and ultra-low 5 nA leakage at 5.0 V standoff - optimized for USB, SIM card, and audio interface signal integrity.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5.0 V - defines maximum continuous operating voltage before conduction begins on protected lines. |
| Diode Capacitance | 16–19 pF @ 1 MHz, 0 V - ensures minimal signal distortion on high-speed lines like USB 2.0 or audio DAC outputs. |
| Clamping Voltage | 12 V @ 2.5 A (8/20 µs) - limits transient voltage seen by downstream ICs during surge events. |
| ESD Withstand | 20 kV contact discharge (IEC 61000-4-2 Level 4) - exceeds industrial and consumer immunity requirements. |
| Peak Pulse Power | 25 W per diode - sustains short-duration surges without thermal failure under IEC 61000-4-5 conditions. |
| Reverse Leakage | 5 nA @ 5.0 V - prevents DC loading or battery drain in always-on portable circuits. |
| Breakdown Voltage | 6.4–7.2 V @ 1 mA - establishes precise turn-on threshold for reliable overvoltage triggering. |
Pinout & Package
SOT363 (SC-88) plastic surface-mounted package: 6-terminal, very small outline, body size 2.2 × 1.35 × 1.1 mm, lead pitch 0.65 mm, exposed pad not present.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Cathode (Diode 1) | Protected signal line 1 input; connects to I/O pin requiring ESD clamping to common anode. |
| 2 | Common Anode | Shared return path to ground or supply rail; must be routed with low-inductance connection. |
| 3 | Cathode (Diode 2) | Protected signal line 2 input; electrically isolated from other cathodes except through common anode. |
| 4 | Cathode (Diode 3) | Protected signal line 3 input; enables compact multi-line protection without discrete devices. |
| 5 | Cathode (Diode 4) | Protected signal line 4 input; supports parallel routing of four high-speed signals in same footprint. |
| 6 | Cathode (Diode 5) | Protected signal line 5 input; completes full five-line protection set for interfaces like SIM card slots. |
Key Features
| Feature | Design Value |
|---|---|
| Five-channel unidirectional protection | Single SOT363 package replaces five discrete diodes, reducing PCB area by >60% vs. discrete solutions. |
| Ultra-low 16–19 pF capacitance | Preserves signal rise/fall times on 480 Mbps USB 2.0 or 24-bit audio I²S buses without edge degradation. |
| 12 V clamping at 2.5 A | Keeps protected ICs (e.g., USB transceivers, SIM controllers) within safe operating voltage during surge events. |
| 5 nA max reverse leakage | Eliminates measurable current draw in battery-powered standby modes, extending shelf life. |
| IEC 61000-4-2 Level 4 certified | Validated for 15 kV air / 8 kV contact discharge - meets EN 61000-6-2 and FCC Part 15 immunity requirements. |
Applications
| USB 2.0 Data Lines | SIM Card Interface |
|---|---|
Use Scenario: Protection of D+ and D− lines in smartphone USB OTG ports against repeated plug/unplug ESD events. IC Role / Device Role / Timing Role: Unidirectional clamping diode array placed directly at connector, with common anode tied to system ground. Use Value: Prevents latch-up or gate oxide damage in USB PHY ICs while maintaining <1 ns response time and <0.1 dB insertion loss at 480 MHz. |
Use Scenario: Guarding six-contact SIM card pads (VCC, GND, CLK, I/O, RST, VPP) in mobile handsets. IC Role / Device Role / Timing Role: Five-diode array protects all signal lines except VCC/GND; common anode grounded to minimize ground bounce. Use Value: Enables robust hot-swap reliability per ISO/IEC 7816-1, sustaining >100,000 insertions without contact corrosion or controller failure. |
| Audio Codec Outputs | Portable Display Serial Interface |
Use Scenario: Shielding stereo headphone DAC outputs (L/R, AGND) and microphone bias lines in Bluetooth earbuds. IC Role / Device Role / Timing Role: Cathodes connected to each analog output; common anode referenced to clean analog ground plane. Use Value: Maintains THD+N <0.005% at 20 Hz–20 kHz by limiting parasitic capacitance to ≤19 pF per channel. |
Use Scenario: Safeguarding MIPI D-PHY clock and data lanes (CLKP/N, DAT0P/N, DAT1P/N) in smartwatch displays. IC Role / Device Role / Timing Role: One PESD5V0L5UYF protects five lanes; remaining lane uses separate device or layout symmetry. Use Value: Ensures eye diagram compliance at 1.5 Gbps by constraining total added capacitance to <20 pF per differential pair. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar unidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| PESD5V0L5UF | SOT886 package (1.0 × 1.45 × 0.5 mm); 16–19 pF capacitance; same electrical specs. | Requires different PCB footprint and reflow profile; better thermal dissipation due to larger thermal pad area. | Select when board space allows larger package and higher power handling is prioritized over minimal footprint. |
| TPD4E001DPYR | Texas Instruments part in X2SON-6; 12 pF typ; 5.5 V standoff; 10 V clamping @ 1 A. | Lower capacitance but reduced surge rating (12 W); no common-anode topology - requires individual anode routing. | Choose for ultra-high-speed interfaces (>1 Gbps) where sub-12 pF is mandatory, accepting lower peak power margin. |
Compared with PESD5V0L5UYF, PESD5V0L5UF offers superior thermal performance in space-tolerant designs, while TPD4E001DPYR trades clamping robustness for lower capacitance in bandwidth-critical applications - neither is pin-compatible, requiring layout revision.
Availability
PESD5V0L5UYF is available at Aetrix Electronics and suitable for USB interface protection, SIM card slot hardening, portable audio output shielding, and MIPI D-PHY lane safeguarding requiring stable component supply across high-mix consumer electronics production.
Supply support for PESD5V0L5UYF includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability standard logic, analog, and ESD protection components - spun off from NXP in 2017 and headquartered in Nijmegen, Netherlands.
The PESDxL5UY series belongs to Nexperia's low-capacitance ESD protection portfolio, engineered specifically for space-constrained portable electronics requiring multi-line transient immunity without signal integrity compromise.
FAQ
What is the maximum recommended PCB trace length between PESD5V0L5UYF and the protected connector?
Trace length from any cathode pin (1, 3–6) to its protected signal source should not exceed 3 mm, and the common anode (Pin 2) must connect to ground via a dedicated low-inductance path ≤2 mm long. Longer traces increase inductance, degrading clamping response and allowing voltage overshoot beyond 12 V during fast ESD events.
Can PESD5V0L5UYF protect bidirectional signal lines like I²C or UART?
No - PESD5V0L5UYF is strictly unidirectional and only clamps positive transients relative to its common anode. For bidirectional lines, use a dual-diode array like PESD5V0S1BB or configure two PESD5V0L5UYF devices back-to-back, which doubles capacitance and requires additional routing space.
Does the 20 kV ESD rating apply to all five channels simultaneously?
Yes - the 20 kV IEC 61000-4-2 contact discharge rating is verified per diode, meaning each cathode-to-anode path withstands independent 20 kV pulses. The device passes full qualification with ten consecutive pulses applied to each channel individually, per datasheet Table 7.
Is reflow soldering mandatory, or can wave soldering be used?
Reflow soldering is the only recommended process per Nexperia's documentation; wave soldering is explicitly unsupported for PESD5V0L5UYF. The SOT363 package lacks thermal mass tolerance for wave profiles, risking delamination or internal bond wire damage - confirmed in Section 10 of the datasheet.
PESD5V0L5UYF Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- 6-TSSOP, SC-88, SOT-363
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 5
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 6.4V
- Voltage - Clamping (Max) @ Ipp:
- 12V
- Current - Peak Pulse (10/1000µs):
- 2.5A (8/20µs)
- Power - Peak Pulse:
- 25W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 160pF @ 1MHz
- Operating Temperature:
- 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-TSSOP
PESD5V0L5UYF FAQ
1.How can I place an order for PESD5V0L5UYF through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0L5UYF on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0L5UYF reliable?
The price and inventory of PESD5V0L5UYF are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0L5UYF is usually 5 days.
3.What payment methods are accepted for PESD5V0L5UYF?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0L5UYF transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0L5UYF?
PESD5V0L5UYF orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0L5UYF order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0L5UYF?
For technical support, including PESD5V0L5UYF datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0L5UYF requirements.
6.How does Aetrix verify that PESD5V0L5UYF is sourced from the original manufacturer or authorized distributors?
All PESD5V0L5UYF products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0L5UYF meets industry standards.
7.What is the process for return or replacement of PESD5V0L5UYF?
All PESD5V0L5UYF units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0L5UYF, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0L5UYF part is unused and in its original packaging.
Return procedure for PESD5V0L5UYF:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0L5UYF Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
