My Inquiry
My Account
Nexperia USA Inc. PESD5V0S1BA/6F
- Part No.:
- PESD5V0S1BA/6F
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- SC-76, SOD-323
- Datasheet:
-
PESD5V0S1BA/6F.pdf
- Description:
- TVS DIODE 5VWM 14VC SOD323
- Quantity:
- Payment:
- Shipping:
Inventory:5,160
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0S1BA from Nexperia is a bidirectional ESD protection diode in SOD323 (SC-76) package, designed to protect one signal line against IEC 61000-4-2 level 4 ESD (±30 kV contact), IEC 61000-4-5 surge (12 A), with 5 V reverse standoff voltage, 14 V clamping voltage at 12 A, and 35–45 pF capacitance - used in high-speed data lines of portable electronics.
For engineers reviewing the PESD5V0S1BA datasheet, PESD5V0S1BA pinout, PESD5V0S1BA application, or PESD5V0S1BA equivalent, key selection criteria include bidirectional clamping performance, low capacitance for USB/USB-C/audio interfaces, sub-5 nA leakage at 5 V, and compact SOD323 footprint for space-constrained PCB layouts.
Technical Context
This dual-cathode bidirectional TVS diode implements a symmetrical back-to-back PN junction configuration across pins 1 and 2, enabling clamping of both positive and negative transients without polarity dependence. It operates within a -55 °C to +150 °C ambient range and supports non-repetitive 8/20 µs surge pulses up to 130 W peak power.
The device meets IEC 61000-4-2 level 4 (±30 kV contact discharge) and IEC 61000-4-5 (12 A, 8/20 µs) standards. Its 50 Ω differential resistance and 14 V clamping voltage at IPPM = 12 A ensure robust transient suppression while minimizing signal distortion on protected lines.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5 V - Maximum continuous operating voltage before conduction begins; defines safe DC bias margin for protected signal lines. |
| Clamping Voltage | 14 V at 12 A - Peak voltage seen by downstream circuitry during worst-case IEC 61000-4-5 surge; limits stress on IC inputs. |
| Diode Capacitance | 35–45 pF at 1 MHz, 0 V - Low enough for USB 2.0 (480 Mbps), audio DAC outputs, and I²C lines without signal integrity degradation. |
| ESD Rating | ±30 kV per IEC 61000-4-2 contact discharge - Exceeds industrial and consumer immunity requirements for handheld and peripheral ports. |
| Peak Pulse Power | 130 W - Sustains short-duration surges without thermal failure; validated under 8/20 µs waveform per IEC 61000-4-5. |
| Leakage Current | 5 nA max at 5 V - Negligible loading on high-impedance analog or logic inputs; avoids battery drain in always-on portable devices. |
Pinout & Package
SOD323 (SC-76) surface-mount plastic package: 2-pin, 1.7 mm × 1.25 mm × 0.95 mm body, 1.3 mm lead pitch, cathode marking bar on side of package.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | K1 (cathode of diode 1) | Forms one half of the back-to-back diode pair; connects to protected line when used in bidirectional clamp configuration. |
| 2 | K2 (cathode of diode 2) | Completes symmetrical structure; tied to ground in standard layout, enabling clamping of both polarities relative to GND. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional ESD protection | Single-device protection of AC-coupled or bipolar signal lines (e.g., USB D+/D−, audio differential pairs) without polarity constraints. |
| Low clamping voltage | 14 V at 12 A ensures downstream logic-level ICs (e.g., 3.3 V or 5 V microcontrollers) remain within absolute maximum ratings during surge events. |
| Ultra-low leakage | 5 nA at VRWM = 5 V prevents measurable current draw in battery-powered systems and avoids offset errors in precision analog front-ends. |
| Small-footprint SMD package | SOD323 footprint enables placement directly at board edge connectors - critical for effective ESD path length reduction per IEC 61000-4-2 layout guidelines. |
Applications
| USB 2.0 Data Lines | Smartphone Audio Jacks |
|---|---|
Use Scenario: Protecting D+ and D− lines of USB 2.0 interfaces in smartphones and docking stations from user-hand ESD events. IC Role / Device Role: Bidirectional transient voltage suppressor placed between connector and USB PHY IC. Use Value: 35–45 pF capacitance preserves signal rise/fall times; ±30 kV ESD rating exceeds IEC 61000-4-2 level 4 requirement for handheld consumer ports. | Use Scenario: Shielding 3.5 mm TRRS audio jacks in mobile handsets against repeated plug/unplug ESD. IC Role / Device Role: Line-to-ground ESD clamp for left/right/ground/mic conductors in analog audio paths. Use Value: Sub-5 nA leakage avoids DC bias shift in electret microphone preamps; 14 V clamping protects codec inputs rated ≤ 16 V. |
| Industrial HMI Touch Panels | Wireless Headset Charging Ports |
Use Scenario: Safeguarding I²C or SPI communication lines between touch controller and host MCU in factory-floor HMIs. IC Role / Device Role: Signal-line protector on low-speed digital buses exposed to operator contact. Use Value: 5 V VRWM aligns with 3.3 V bus operation; SOD323 size allows placement within tight bezel margins near panel connectors. | Use Scenario: ESD hardening of USB-C power/data ports on Bluetooth headsets subject to frequent cable insertion cycles. IC Role / Device Role: Dual-purpose clamp for VBUS (with external series resistor) and CC line protection. Use Value: 130 W peak power withstands multiple fast-transient events; 150 °C max junction temperature supports reflow and operational reliability in sealed enclosures. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NUP4105MR6T1G | 4-channel array in SOT-563; 5.5 V VRWM; 12 V clamping at 12 A; 30 pF typical. | Offers multi-line protection in single package but larger footprint; higher channel count unnecessary for single-line use cases. | Select when protecting ≥2 lines simultaneously; avoid if only one line requires protection and board space is constrained. |
| Vishay ESDE05C1-2 | Single-line SOD-323 device; 5 V VRWM; 12.5 V clamping at 12 A; 25 pF typical; ±30 kV ESD rating. | Lower capacitance improves high-frequency signal fidelity but slightly reduced surge robustness (100 W PPPM vs. 130 W). | Prefer for RF-sensitive or >100 Mbps serial links where <30 pF is mandatory; accept trade-off in peak power margin. |
Compared with NUP4105MR6T1G and ESDE05C1-2, PESD5V0S1BA delivers optimal balance of low capacitance (35–45 pF), high surge capability (130 W), and minimal footprint for cost-sensitive single-line protection - especially where USB 2.0 timing margins and IEC 61000-4-5 compliance are jointly required.
Availability
PESD5V0S1BA is available at Aetrix Electronics and suitable for cellular handsets, portable electronics, and audio/video equipment requiring stable component supply, consistent parametric performance, and long-term production continuity.
Supply support for PESD5V0S1BA includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete, logic, and MOSFET solutions, headquartered in Nijmegen, Netherlands.
The PESD5V0S1BA belongs to Nexperia's ESD protection portfolio, engineered specifically for ultra-compact, high-immunity transient suppression in portable and interface-dense consumer electronics.
FAQ
What is the maximum continuous reverse voltage this diode can withstand?
The PESD5V0S1BA has a reverse standoff voltage (VRWM) of 5 V, meaning it blocks up to 5 V DC or steady-state AC signals without entering breakdown. This value is confirmed in Table 6 of the datasheet under "reverse standoff voltage" with no minimum or typical - only a maximum of 5 V at 25 °C ambient.
Can this device protect both positive and negative ESD transients on the same line?
Yes - the PESD5V0S1BA uses a back-to-back diode configuration (K1 and K2 terminals) that provides symmetrical clamping for ± transients. Its bidirectional behavior is explicitly stated in Section 1 ("Bidirectional ESD protection diode") and verified by identical ±30 kV IEC 61000-4-2 ratings.
How does its 35–45 pF capacitance affect USB 2.0 signal integrity?
At 480 Mbps, USB 2.0 tolerates up to ~60 pF total line capacitance. With 35–45 pF diode capacitance plus PCB trace capacitance (<5 pF), the PESD5V0S1BA remains within specification - preserving eye diagram margins and meeting USB-IF compliance when placed close to the connector per layout guideline #1 in Section 10.
Is this part qualified for automotive applications?
No - the April 2024 datasheet revision explicitly states in Section 13 that PESD5V0S1BA was changed to non-automotive qualification. Automotive alternatives (e.g., PESD5V0S1BA-Q) are available from Nexperia but require separate ordering and qualification documentation.
PESD5V0S1BA/6F Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- SC-76, SOD-323
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 5.5V
- Voltage - Clamping (Max) @ Ipp:
- 14V
- Current - Peak Pulse (10/1000µs):
- 12A (8/20µs)
- Power - Peak Pulse:
- 130W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 35pF @ 1MHz
- Operating Temperature:
- -65°C ~ 150°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOD-323
PESD5V0S1BA/6F FAQ
1.How can I place an order for PESD5V0S1BA/6F through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0S1BA/6F on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0S1BA/6F reliable?
The price and inventory of PESD5V0S1BA/6F are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0S1BA/6F is usually 5 days.
3.What payment methods are accepted for PESD5V0S1BA/6F?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0S1BA/6F transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0S1BA/6F?
PESD5V0S1BA/6F orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0S1BA/6F order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0S1BA/6F?
For technical support, including PESD5V0S1BA/6F datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0S1BA/6F requirements.
6.How does Aetrix verify that PESD5V0S1BA/6F is sourced from the original manufacturer or authorized distributors?
All PESD5V0S1BA/6F products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0S1BA/6F meets industry standards.
7.What is the process for return or replacement of PESD5V0S1BA/6F?
All PESD5V0S1BA/6F units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0S1BA/6F, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0S1BA/6F part is unused and in its original packaging.
Return procedure for PESD5V0S1BA/6F:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0S1BA/6F Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
