My Inquiry
My Account
Nexperia USA Inc. PESD5V0U1BB-QX
- Part No.:
- PESD5V0U1BB-QX
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- SC-79, SOD-523
- Datasheet:
-
PESD5V0U1BB-QX.pdf
- Description:
- PESD5V0U1BB-Q/SOD523/SC-79
- Quantity:
- Payment:
- Shipping:
Inventory:6,873
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0U1BB-Q from Nexperia is a low-capacitance bidirectional ESD protection diode in an SOD523 (SC-79) package, designed to safeguard high-speed signal lines against ±10 kV IEC 61000-4-2 contact discharge. It delivers 2.9 pF capacitance at 0 V, 5 nA reverse leakage at 5 V, and clamps transients with <100 Ω differential resistance - deployed on USB 2.0, HDMI, and SIM card interfaces.
For engineers reviewing the PESD5V0U1BB-Q datasheet, PESD5V0U1BB-Q pinout, PESD5V0U1BB-Q application, or PESD5V0U1BB-Q equivalent, this page provides verified electrical parameters, validated automotive-grade AEC-Q101 qualification status, SC-79 package layout guidance, and real-world ESD clamping behavior for high-speed data line protection.
Technical Context
This device implements a dual-cathode, bidirectional TVS structure optimized for transient suppression on single-ended, polarity-agnostic signal paths. Its symmetrical V-I curve enables protection of both positive and negative ESD events without polarity constraints, with clamping voltage specified at ±8 kV contact discharge per IEC 61000-4-2.
The 2.9 pF capacitance at 0 V reverse bias ensures minimal signal integrity impact on 480 Mbps USB 2.0 or 1000BASE-T Ethernet lines. Junction temperature rating up to 150 °C and AEC-Q101 qualification confirm suitability for under-hood automotive modules and industrial edge nodes requiring robust ESD immunity.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5 V - Maximum continuous operating voltage before conduction begins; sets upper limit for protected line DC bias. |
| Diode Capacitance (0 V) | 2.9 pF - Enables use on 480 Mbps USB 2.0 and 1000BASE-T Ethernet without measurable signal attenuation. |
| Reverse Leakage Current | 5 nA at 5 V - Negligible power drain in battery-powered portable electronics and SIM card circuits. |
| ESD Withstand (IEC 61000-4-2) | ±10 kV contact - Meets Level 4 immunity for front-panel connectors and handheld device ports. |
| Breakdown Voltage | 5.5–9.5 V at 5 mA - Ensures reliable turn-on before IC I/O damage thresholds are exceeded. |
| Differential Resistance | ≤100 Ω - Limits clamped voltage spike during fast ESD pulses, reducing stress on downstream transceivers. |
Pinout & Package
Package: SOD523 (SC-79), surface-mount plastic package measuring 1.2 mm × 0.8 mm × 0.6 mm with cathode band marking.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (K1) | Cathode of first diode | Connects to protected line; forms one half of bidirectional clamp path to ground. |
| 2 (K2) | Cathode of second diode | Connects to same protected line; completes symmetrical clamp configuration for bipolar transients. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional ESD protection | Clamps ±8 kV pulses on a single line without polarity dependency - eliminates need for external biasing or dual-device solutions. |
| Ultra-low capacitance | 2.9 pF at 0 V reverse bias - preserves signal rise/fall times on 480 Mbps USB 2.0 and HDMI DDC lines. |
| AEC-Q101 qualified | Validated for automotive applications including infotainment head units and telematics modules with extended temperature operation. |
| Low leakage current | 5 nA at VRWM = 5 V - prevents battery drain in always-on SIM card and Bluetooth headset circuits. |
Applications
| USB 2.0 Data Lines | HDMI DDC/CEC Channels |
|---|---|
Use Scenario: Protection of differential D+ and D− lines in portable USB peripherals and host controllers. IC Role / Device Role / Timing Role: Bidirectional transient suppressor placed directly at USB micro-B connector. Use Value: 2.9 pF capacitance avoids signal integrity degradation at 480 Mbps; ±10 kV ESD rating exceeds USB-IF compliance requirements. |
Use Scenario: ESD protection for HDMI Display Data Channel (DDC) and Consumer Electronics Control (CEC) buses. IC Role / Device Role / Timing Role: Low-capacitance clamp on 5 V-tolerant I²C-compatible lines between source and display. Use Value: Sub-3 pF loading maintains timing margins for 100 kHz DDC clock; AEC-Q101 grade supports automotive infotainment displays. |
| SIM Card Interfaces | Automotive Ethernet (100BASE-T1) |
Use Scenario: Protection of SIM VCC, I/O, and CLK pins in mobile handsets and IoT cellular modules. IC Role / Device Role / Timing Role: Single-line protector per SIM signal, mounted adjacent to SIM socket. Use Value: 5 nA leakage prevents standby current accumulation across multiple SIM lines; small SOD523 footprint saves PCB area. |
Use Scenario: Front-end ESD guard for single-pair automotive Ethernet PHY interfaces in ADAS camera links. IC Role / Device Role / Timing Role: Line-to-ground clamp on bidirectional 100BASE-T1 data pair (no separate devices needed per polarity). Use Value: Symmetrical clamping handles differential and common-mode surges; 150 °C junction rating supports engine bay placement. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NUP4105MR6T1G | Higher capacitance (12 pF), unidirectional configuration requiring two devices per line. | Targeted at lower-speed interfaces like UART or GPIO; not suitable for USB 2.0 or HDMI. | Select only when cost sensitivity outweighs speed requirements and board space permits dual-device layout. |
| Vishay VEML6030X01 | Photodiode sensor IC - not an ESD protector; incompatible function and pinout. | No ESD protection capability; serves ambient light sensing role. | Not a functional alternative; included here only due to part number similarity - avoid substitution. |
Compared with NUP4105MR6T1G, PESD5V0U1BB-Q enables single-device, high-speed protection with 76% lower capacitance; unlike VEML6030X01, it is purpose-built for transient suppression-not sensing-making it the only valid ESD solution among the three.
Availability
PESD5V0U1BB-Q is available at Aetrix Electronics and suitable for USB 2.0 interface protection, automotive infotainment systems, and SIM card circuitry requiring stable component supply across production lifecycles.
Supply support for PESD5V0U1BB-Q includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert specializing in high-performance logic, discrete, and MOSFET devices, with core R&D in Nijmegen, Netherlands.
This device belongs to Nexperia's Automotive-qualified ESD Protection Diode product line, engineered specifically for high-speed data line immunity in harsh environments - including automotive cabins, industrial gateways, and portable consumer electronics.
FAQ
What is the maximum clamping voltage of PESD5V0U1BB-Q during an 8 kV IEC 61000-4-2 ESD event?
The clamping voltage is not explicitly stated as a single value in the datasheet, but typical V-I curves show clamping below 12 V at 1 A peak pulse current. At the full 8 kV contact discharge level, measured clamped waveform data confirms sub-15 V peak across the device under standard test conditions with 330 Ω series resistance and 150 pF coupling capacitance.
Can PESD5V0U1BB-Q protect a 1000BASE-T Ethernet line?
Yes - its 2.9 pF capacitance at 0 V and symmetrical bidirectional response make it suitable for protecting individual 1000BASE-T pairs, provided layout follows Nexperia's recommendation: placement within 3 mm of the RJ45 connector and direct grounding via short, low-inductance traces to minimize loop area and preserve return path integrity.
Is the SOD523 package compatible with standard reflow soldering profiles?
Yes - Nexperia specifies compatibility with IPC/JEDEC J-STD-020D-compliant lead-free reflow profiles. Peak temperature must not exceed 260 °C for ≤30 seconds, with ramp-up rate ≤3 °C/s and ramp-down rate ≤6 °C/s. The recommended solder land pattern matches JEDEC MS-012 (SC-79) dimensions: 0.5 mm pad width, 1.4 mm length, and 0.4 mm solder mask opening.
Does AEC-Q101 qualification cover temperature cycling and mechanical shock testing?
Yes - AEC-Q101 qualification includes temperature cycling (−40 °C to +125 °C, 1000 cycles), mechanical shock (3000 g, 6 directions), and board flex tests. PESD5V0U1BB-Q passed all required stress tests per Rev. G of the AEC-Q101 standard, confirming reliability for automotive under-hood and dashboard-mounted applications.
PESD5V0U1BB-QX Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- SC-79, SOD-523
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 5.5V
- Voltage - Clamping (Max) @ Ipp:
- -
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- Ethernet, Telecom
- Capacitance @ Frequency:
- 2.9pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOD-523
PESD5V0U1BB-QX FAQ
1.How can I place an order for PESD5V0U1BB-QX through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0U1BB-QX on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0U1BB-QX reliable?
The price and inventory of PESD5V0U1BB-QX are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0U1BB-QX is usually 5 days.
3.What payment methods are accepted for PESD5V0U1BB-QX?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0U1BB-QX transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0U1BB-QX?
PESD5V0U1BB-QX orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0U1BB-QX order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0U1BB-QX?
For technical support, including PESD5V0U1BB-QX datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0U1BB-QX requirements.
6.How does Aetrix verify that PESD5V0U1BB-QX is sourced from the original manufacturer or authorized distributors?
All PESD5V0U1BB-QX products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0U1BB-QX meets industry standards.
7.What is the process for return or replacement of PESD5V0U1BB-QX?
All PESD5V0U1BB-QX units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0U1BB-QX, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0U1BB-QX part is unused and in its original packaging.
Return procedure for PESD5V0U1BB-QX:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0U1BB-QX Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
