My Inquiry
My Account
Nexperia USA Inc. PESD5V0V1BLD
- Part No.:
- PESD5V0V1BLD
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- 2-XDFN
- Datasheet:
-
PESD5V0V1BLD.pdf
- Description:
- NOW NEXPERIA PESD5V0V1BLD - TRAN
- Quantity:
- Payment:
- Shipping:
Inventory:4,846
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V0V1BLD from Nexperia is a bidirectional ESD protection diode in a DFN1006D-2 (SOD882D) package, designed to safeguard single-ended signal lines against ±30 kV IEC 61000-4-2 ESD events and 4.8 A IEC 61000-4-5 surges. It delivers 11 pF typical capacitance, 12.5 V clamping voltage at 4.8 A, and 1 nA reverse leakage at 5 V, enabling high-speed interface protection in space-constrained portable electronics.
For engineers reviewing the PESD5V0V1BLD datasheet, PESD5V0V1BLD pinout, PESD5V0V1BLD application, or PESD5V0V1BLD equivalent, key selection criteria include ultra-low capacitance for USB 2.0/10/100 Mbit/s Ethernet signal integrity, bidirectional clamping symmetry, side-wettable flanks for automated optical inspection, and SOD882D footprint compatibility with high-density PCB layouts.
Technical Context
This device implements a symmetric dual-cathode TVS structure optimized for bidirectional transient suppression on AC-coupled or floating data lines. Its low dynamic resistance (0.2 Ω) and fast response ensure effective clamping of sub-nanosecond ESD pulses while maintaining minimal signal distortion.
The SOD882D package integrates solderable side pads and a 0.37 mm typical height, enabling reliable reflow soldering and AOI verification. The cathode bar marking and DFN1006D-2 outline support precise placement and polarity-aware routing in high-frequency layout environments.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5 V - Ensures no conduction during normal 3.3 V or 5 V signal operation, preserving DC bias integrity. |
| Diode Capacitance | 11 pF (typ.) at 1 MHz - Enables use on USB 2.0, FireWire, and 100BASE-TX without signal rise-time degradation. |
| Clamping Voltage | 12.5 V at 4.8 A - Limits transient overvoltage to safe levels for downstream 3.3 V logic interfaces. |
| ESD Withstand | ±30 kV contact discharge - Meets IEC 61000-4-2 Level 4 for robust system-level ESD immunity. |
| Peak Pulse Power | 45 W - Sustains 8/20 µs surge transients per IEC 61000-4-5 without thermal failure. |
| Reverse Leakage | 1 nA at 5 V - Prevents measurable current draw in battery-powered portable devices. |
Pinout & Package
DFN1006D-2 (SOD882D) is a leadless ultra-small surface-mount package measuring 1.0 × 0.6 × 0.4 mm with visible, solderable side pads and a 0.65 mm pitch. Package height is typ. 0.37 mm, supporting thin-profile mobile designs and automated optical inspection.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (K1) | Cathode 1 | One terminal of symmetric dual-cathode structure; marked by cathode bar for polarity identification. |
| 2 (K2) | Cathode 2 | Second terminal of symmetric dual-cathode structure; enables bidirectional clamping across protected line and ground. |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional ESD protection | Clamps both positive and negative transients on a single line without polarity constraints, ideal for AC-coupled interfaces like USB D+/D−. |
| Solderable side pads | Enables automated optical inspection (AOI) and reliable reflow joint formation in high-volume SMT assembly. |
| Ultra-low 11 pF capacitance | Maintains signal integrity up to 480 Mbps (USB 2.0) with <1% rise-time degradation on 50 Ω traces. |
| 0.37 mm typical package height | Reduces board stack height in slim smartphones, wearables, and SIM card adapters where Z-space is constrained. |
Applications
| USB 2.0 Data Lines | 10/100 Mbit/s Ethernet PHY |
|---|---|
|
Use Scenario: Protection of D+ and D− differential pair in smartphone USB OTG ports against user-handling ESD. IC Role / Device Role / Timing Role: Bidirectional clamping diode placed immediately adjacent to USB connector to shunt transients before reaching PHY IC. Use Value: 11 pF capacitance avoids signal integrity loss at 480 Mbps; ±30 kV ESD rating ensures compliance with IEC 61000-4-2 Level 4 system testing. |
Use Scenario: Transient suppression on TX+/TX− and RX+/RX− pairs in industrial Ethernet switches. IC Role / Device Role / Timing Role: Line-to-ground ESD clamp on each differential signal path, mounted within 2 mm of RJ45 connector. Use Value: 12.5 V clamping voltage protects 3.3 V PHY inputs; 45 W peak power handles multiple surge events per IEC 61000-4-5. |
| SIM Card Interface | Audio Line Input/Output |
|
Use Scenario: ESD protection for VCC, I/O, CLK, and RST pins on embedded SIM (eSIM) modules in IoT trackers. IC Role / Device Role / Timing Role: Single-line protector per signal, leveraging compact SOD882D footprint to fit tight spacing around 6-pin SIM pads. Use Value: 1 nA leakage prevents battery drain in always-on cellular modules; 0.37 mm height avoids interference with shield can mounting. |
Use Scenario: Protection of analog audio input/output lines in Bluetooth headsets and portable DACs. IC Role / Device Role / Timing Role: Low-capacitance clamp on unbalanced line drivers/receivers to prevent pop-noise and amplifier latch-up. Use Value: 11 pF capacitance avoids high-frequency roll-off in 20 kHz audio band; bidirectional operation accommodates AC-coupled signals. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NUP4105MR6T1G | Higher 15 pF capacitance; 14 V clamping at 4.5 A; SOT-563 package (1.6 × 1.6 mm). | Less suitable for >100 Mbps interfaces due to higher capacitance; larger footprint limits density. | Select when board area allows larger package and 15 pF is acceptable for lower-speed lines (e.g., UART, I²C). |
| Vishay VEML6030X01 | Not applicable - this is an ambient light sensor, not an ESD diode; excluded from valid alternatives. | N/A | Invalid alternative; disregard. |
Compared with NUP4105MR6T1G, PESD5V0V1BLD offers 36% lower capacitance and 40% smaller footprint, making it superior for USB 2.0 and high-density SIM card layouts; the second listed part is invalid and must be omitted from design consideration.
Availability
PESD5V0V1BLD is available at Aetrix Electronics and suitable for USB 2.0 data line protection, 10/100 Mbit/s Ethernet PHY interfaces, and SIM card signal line safeguarding requiring stable component supply across high-mix consumer electronics production.
Supply support for PESD5V0V1BLD includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-performance, high-reliability discrete, logic, and MOSFET solutions, headquartered in Nijmegen, Netherlands.
This device belongs to Nexperia's ESD protection portfolio, engineered specifically for ultra-low-capacitance, high-speed interface protection in portable and space-constrained electronics.
FAQ
What is the maximum operating temperature for PESD5V0V1BLD?
The junction temperature limit is 150 °C, and the ambient operating range is −55 °C to +150 °C per IEC 60134 limiting values. Thermal derating applies above 25 °C ambient: peak pulse power decreases linearly to 50% at 125 °C junction temperature, as shown in Figure 5 of the datasheet.
Can PESD5V0V1BLD protect against IEC 61000-4-5 surges?
Yes - it is rated for 4.8 A peak pulse current (IPPM) under the 8/20 µs waveform defined in IEC 61000-4-5, delivering 45 W peak pulse power. This supports protection of Ethernet, RS-485, and other interfaces exposed to lightning-induced surges in industrial environments.
How is polarity identified on the SOD882D package?
A cathode bar marking on the top surface indicates Pin 1 (K1); Pin 2 (K2) is the opposite terminal. The bar aligns with the leftmost pad in standard orientation (as shown in Figure 11), and both terminals serve as cathodes in the symmetric bidirectional structure.
Is PESD5V0V1BLD automotive qualified?
No - the 2023 datasheet revision explicitly states this device is non-automotive qualified. It lacks AEC-Q200 stress testing and is not warranted for automotive applications. For automotive-grade equivalents, consult Nexperia's PESD5V0V1BLS-Q series.
PESD5V0V1BLD Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- 2-XDFN
- Series:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 5.8V
- Voltage - Clamping (Max) @ Ipp:
- 12.5V
- Current - Peak Pulse (10/1000µs):
- 4.8A (8/20µs)
- Power - Peak Pulse:
- 45W
- Power Line Protection:
- No
- Applications:
- -
- Capacitance @ Frequency:
- 11pF @ 1MHz
- Operating Temperature:
- 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- -
- Mounting Type:
- Surface Mount, Wettable Flank
- Supplier Device Package:
- DFN1006D-2
PESD5V0V1BLD FAQ
1.How can I place an order for PESD5V0V1BLD through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V0V1BLD on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V0V1BLD reliable?
The price and inventory of PESD5V0V1BLD are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V0V1BLD is usually 5 days.
3.What payment methods are accepted for PESD5V0V1BLD?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V0V1BLD transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V0V1BLD?
PESD5V0V1BLD orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V0V1BLD order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V0V1BLD?
For technical support, including PESD5V0V1BLD datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V0V1BLD requirements.
6.How does Aetrix verify that PESD5V0V1BLD is sourced from the original manufacturer or authorized distributors?
All PESD5V0V1BLD products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V0V1BLD meets industry standards.
7.What is the process for return or replacement of PESD5V0V1BLD?
All PESD5V0V1BLD units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V0V1BLD, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V0V1BLD part is unused and in its original packaging.
Return procedure for PESD5V0V1BLD:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V0V1BLD Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
