My Inquiry
My Account
Nexperia USA Inc. PESD5V2S2UT-QR
- Part No.:
- PESD5V2S2UT-QR
- Manufacturer:
- Nexperia USA Inc.
- Category:
- TVS Diodes
- Package:
- TO-236-3, SC-59, SOT-23-3
- Datasheet:
-
PESD5V2S2UT-QR.pdf
- Description:
- PESD5V2S2UT-Q/SOT23/TO-236AB
- Quantity:
- Payment:
- Shipping:
Inventory:4,281
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PESD5V2S2UT-Q from Nexperia is a unidirectional double ESD protection diode in SOT23 package, designed to protect two data or transmission lines against electrostatic discharge. It delivers 30 kV IEC 61000-4-2 contact ESD immunity, 20 V clamping voltage at 15 A surge current, and 152 pF typical capacitance - enabling robust protection for high-speed USB 2.0 and parallel port interfaces in automotive infotainment systems.
For engineers reviewing the PESD5V2S2UT-Q datasheet, PESD5V2S2UT-Q pinout, PESD5V2S2UT-Q application, or PESD5V2S2UT-Q equivalent, key selection criteria include reverse standoff voltage (5.2 V), ultra-low leakage (<150 nA), AEC-Q101 qualification, and dual-cathode/common-anode configuration for independent line protection.
Technical Context
This device implements two separate unidirectional ESD protection paths sharing a common anode (Pin 3), with each cathode (Pins 1 and 2) assigned to one protected line. Its low 80 Ω differential resistance ensures minimal signal distortion during transient events.
The diode operates within a junction temperature range of −65 °C to 150 °C and meets IEC 61000-4-5 surge immunity (15 A, 8/20 µs) alongside full IEC 61000-4-2 Level 4 compliance - making it suitable for harsh automotive environments where signal integrity and reliability are critical.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Standoff Voltage | 5.2 V - Ensures no conduction during normal operation of 5 V logic or USB data lines. |
| Clamping Voltage | 20 V at 15 A - Limits transient voltage to safe levels for downstream 5 V ICs during IEC 61000-4-5 surges. |
| Diode Capacitance | 152 pF typical at 1 MHz - Low enough to avoid signal integrity degradation on USB 2.0 (480 Mbps) lines. |
| Peak Pulse Power | 260 W at 8/20 µs - Sustains high-energy transients without failure in automotive ECU interfaces. |
| ESD Rating | 30 kV contact per IEC 61000-4-2 - Exceeds Level 4 requirements for touch-sensitive vehicle controls. |
| Reverse Leakage | 0.15 µA typical at 5.2 V - Prevents DC loading on sensitive analog or high-impedance sensor inputs. |
Pinout & Package
SOT23 plastic surface-mount package (2.9 mm × 1.3 mm × 1.0 mm, 1.9 mm lead pitch), qualified per AEC-Q101 for automotive use.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | K1 (cathode of diode 1) | Connects to first protected line; conducts ESD current to common anode during positive transients. |
| 2 | K2 (cathode of diode 2) | Connects to second protected line; provides independent ESD path without crosstalk. |
| 3 | A (common anode) | Shared return path to ground or supply rail; enables compact dual-line layout with single grounding point. |
Key Features
| Feature | Design Value |
|---|---|
| Dual unidirectional protection | Two independent ESD paths in one SOT23 footprint - reduces PCB area vs. discrete diodes and avoids shared impedance coupling. |
| Low clamping voltage | 20 V max at 15 A - keeps protected ICs below absolute maximum ratings during 8/20 µs surges. |
| Ultra-low leakage | <150 nA at VRWM - eliminates measurable DC error in precision analog sensor front-ends. |
| AEC-Q101 qualification | Qualified for automotive under stress test conditions - supports deployment in engine control, ADAS, and infotainment modules. |
Applications
| USB 2.0 Interface Protection | Automotive Parallel Port |
|---|---|
Use Scenario: Protecting D+ and D− lines of a USB 2.0 host controller in a vehicle head unit against ESD from user connectors. IC Role / Device Role / Timing Role: Unidirectional clamping diode pair providing fast transient response (<1 ns) to divert ESD energy before it reaches the PHY. Use Value: 152 pF capacitance preserves signal rise time; 20 V clamping prevents latch-up in USB transceivers rated for 5.5 V absolute max. | Use Scenario: Safeguarding bidirectional 8-bit parallel data bus between MCU and display driver in dashboard instrumentation. IC Role / Device Role / Timing Role: Dual-line ESD suppressor placed at connector entry point to shunt ±30 kV contact discharges to chassis ground. Use Value: Common-anode architecture allows single-point grounding, minimizing ground bounce across all eight data lines. |
| Audio Line Input Protection | Industrial Communication Port |
Use Scenario: Shielding analog audio input pins (e.g., microphone or line-in) in car audio amplifiers from handling ESD. IC Role / Device Role / Timing Role: High-impedance protection element that remains non-conductive below 5.2 V while clamping transients above breakdown. Use Value: 0.15 µA leakage avoids DC offset errors; 6.8 V typical breakdown ensures compatibility with 5 V biased audio circuits. | Use Scenario: Securing RS-232 or CAN FD auxiliary debug ports on telematics control units exposed to service technician ESD events. IC Role / Device Role / Timing Role: Front-end surge limiter meeting IEC 61000-4-5 (15 A, 8/20 µs) and IEC 61000-4-2 (30 kV) standards simultaneously. Use Value: 260 W peak pulse power rating handles repeated surge events without parametric shift or thermal runaway. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-line unidirectional ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESD5V3U2U-2/TR | Higher VRWM (5.3 V), lower capacitance (120 pF typ), same SOT23-3 package and AEC-Q101 grade. | Better suited for 5.3 V tolerant interfaces like some industrial microcontrollers; tighter capacitance spec benefits >1 Gbps links. | Select when lower capacitance is prioritized over marginally higher clamping voltage (22 V). |
| TPD2E007DRYR | Lower VRWM (3.6 V), higher capacitance (18 pF per line), dual-channel but with separate anodes - requires two ground connections. | Optimized for low-voltage mobile interfaces (e.g., HDMI DDC lines); not AEC-Q101 qualified. | Choose only for non-automotive consumer electronics where space and voltage margin allow. |
Compared with ESD5V3U2U-2/TR and TPD2E007DRYR, PESD5V2S2UT-Q offers the best balance of 5.2 V standoff, 20 V clamping, and AEC-Q101 compliance - making it the preferred choice for automotive-grade dual-line protection where reliability and standard compliance are mandatory.
Availability
PESD5V2S2UT-Q is available at Aetrix Electronics and suitable for automotive infotainment systems, industrial communication ports, and high-speed data interface designs requiring stable component supply and long-term lifecycle support.
Supply support for PESD5V2S2UT-Q includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in ESD protection, MOSFETs, and bipolar transistors.
This device belongs to Nexperia's Automotive-qualified ESD Protection Diode product line, engineered specifically for robust transient suppression in safety-critical vehicle subsystems including body electronics and ADAS interfaces.
FAQ
What is the maximum operating temperature for PESD5V2S2UT-Q?
The device supports continuous operation up to 150 °C junction temperature and −65 °C to 150 °C ambient temperature, validated per AEC-Q101 thermal cycling and high-temperature operating life tests - confirming suitability for under-hood and dashboard-mounted automotive modules.
Can PESD5V2S2UT-Q protect bidirectional signal lines?
No - it is strictly unidirectional, with cathodes on Pins 1 and 2 and a common anode on Pin 3. For bidirectional protection of a single line, a dedicated bidirectional ESD diode (e.g., PESD5V0S2UAT) is required; this part protects two unidirectional lines independently.
How does the common-anode configuration affect PCB layout?
The shared anode (Pin 3) simplifies grounding by allowing both protected lines to reference the same low-inductance ground node, reducing loop area and improving ESD immunity - but requires careful routing to avoid coupling noise between K1 and K2 traces before reaching the device.
Is PESD5V2S2UT-Q compatible with lead-free reflow soldering?
Yes - it is qualified for standard lead-free reflow profiles (J-STD-020), with a maximum peak temperature of 260 °C and compatibility confirmed for both SnAgCu paste and wave soldering using the footprints defined in Figures 10 and 11 of the official datasheet.
PESD5V2S2UT-QR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Package/Case:
- TO-236-3, SC-59, SOT-23-3
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 2
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 5.2V (Max)
- Voltage - Breakdown (Min):
- 6.4V
- Voltage - Clamping (Max) @ Ipp:
- 20V
- Current - Peak Pulse (10/1000µs):
- 15A (8/20µs)
- Power - Peak Pulse:
- 260W
- Power Line Protection:
- No
- Applications:
- Telecom
- Capacitance @ Frequency:
- 152pF @ 1MHz
- Operating Temperature:
- -65°C ~ 150°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TO-236AB
PESD5V2S2UT-QR FAQ
1.How can I place an order for PESD5V2S2UT-QR through Aetrix?
Please submit a Request for Quotation (RFQ) for PESD5V2S2UT-QR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PESD5V2S2UT-QR reliable?
The price and inventory of PESD5V2S2UT-QR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PESD5V2S2UT-QR is usually 5 days.
3.What payment methods are accepted for PESD5V2S2UT-QR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PESD5V2S2UT-QR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PESD5V2S2UT-QR?
PESD5V2S2UT-QR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PESD5V2S2UT-QR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PESD5V2S2UT-QR?
For technical support, including PESD5V2S2UT-QR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PESD5V2S2UT-QR requirements.
6.How does Aetrix verify that PESD5V2S2UT-QR is sourced from the original manufacturer or authorized distributors?
All PESD5V2S2UT-QR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PESD5V2S2UT-QR meets industry standards.
7.What is the process for return or replacement of PESD5V2S2UT-QR?
All PESD5V2S2UT-QR units undergo pre-shipment inspection (PSI). If there is an issue with PESD5V2S2UT-QR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PESD5V2S2UT-QR part is unused and in its original packaging.
Return procedure for PESD5V2S2UT-QR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PESD5V2S2UT-QR Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
