My Inquiry
My Account
Diodes Incorporated SMBJ10AQ-13-F
- Part No.:
- SMBJ10AQ-13-F
- Manufacturer:
- Diodes Incorporated
- Category:
- TVS Diodes
- Package:
- DO-214AA, SMB
- Datasheet:
-
SMBJ10AQ-13-F.pdf
- Description:
- TRANSIENT VOLTAGE SUPPRESSOR PP
- Quantity:
- Payment:
- Shipping:
Inventory:6,944
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SMBJ10AQ-13-F from Diodes Incorporated is a unidirectional 600W surface-mount automotive transient voltage suppressor (TVS) diode with 10V reverse standoff voltage (VRWM), 11.1V minimum breakdown voltage (VBR), and 17.0V maximum clamping voltage (VC) at 35.3A peak pulse current (IPP). It delivers AEC-Q101 qualification, ISO7637-2 Pulse 1/2a/3a/3b and ISO10605 ESD protection for automotive power line and signal line surge suppression.
For engineers reviewing the SMBJ10AQ-13-F datasheet, SMBJ10AQ-13-F pinout, SMBJ10AQ-13-F application, or SMBJ10AQ-13-F equivalent, this part supports critical design validation for automotive infotainment power rails, body control module inputs, CAN transceiver protection, and ADAS sensor interface surge immunity-where precise clamping voltage, low leakage (<0.5µA @ VRWM), and IATF 16949 traceable manufacturing are mandatory.
Technical Context
This TVS diode operates as a unidirectional avalanche clamp in parallel with sensitive automotive electronics, activating only during overvoltage transients exceeding its 11.1–12.3V breakdown range. Its 17.0V clamping voltage at 35.3A ensures downstream ICs see limited stress under ISO7637-2 Pulse 1 (−150V) and Pulse 3b (+150V) waveforms.
Designed for operation from −55°C to +175°C junction temperature, it sustains 5.0W steady-state power dissipation at TL = +75°C and derates linearly above +25°C (4.8W/°C), enabling reliable placement near hot engine-control units without thermal runaway.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Peak Pulse Power | 600W - Withstands single 10×1000µs transients up to 35.3A without failure |
| Reverse Standoff Voltage (VRWM) | 10.0V - Blocks normal 12V automotive battery voltage with <0.5µA leakage |
| Breakdown Voltage (VBR) | 11.1–12.3V @ 1.0mA - Ensures reliable turn-on before damage threshold of 5V logic or 3.3V MCU I/O |
| Clamping Voltage (VC) | 17.0V @ IPP = 35.3A - Limits voltage seen by protected circuit during ISO7637-2 Pulse 3b (+150V) |
| Peak Forward Surge Current (IFSM) | 100A @ 8.3ms half-sine - Survives alternator load dump surges without bond wire fusing |
| Operating Temperature | −55°C to +175°C - Validated for under-hood ECU and transmission control unit environments |
| AEC-Q101 Qualified | Yes - Certified for automotive use with PPAP documentation and IATF 16949 manufacturing |
Pinout & Package
Package: SMB (DO-214AA), surface-mount, molded plastic body with UL 94V-0 flammability rating; moisture sensitivity level 1 per J-STD-020; 0.1g typical weight; cathode band marking on top surface.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode | Transient return path | Connected to ground or low-impedance chassis return; carries full surge current during clamping |
| Cathode | Protected line connection | Connected to +12V rail or signal line; clamps to anode when voltage exceeds VBR |
Key Features
| Feature | Design Value |
|---|---|
| 600W peak pulse power | Enables robust protection against high-energy ISO7637-2 Pulse 1 (−150V) and Pulse 3a (−220V) events |
| 17.0V clamping at 35.3A | Keeps protected 12V microcontroller power rails below absolute maximum ratings during surge |
| AEC-Q101 qualification & PPAP support | Meets automotive OEM requirements for change control, lot traceability, and production part approval |
| Lead-free, halogen-free, RoHS 3 compliant | Supports green manufacturing mandates and eliminates brominated flame retardants in PCB assembly |
Applications
| Infotainment Power Rail Protection | CAN Transceiver ESD Shielding |
|---|---|
|
Use Scenario: 12V supply input to head unit MCU and audio amplifier ICs exposed to load dump and jump-start transients. IC Role / Device Role / Timing Role: Unidirectional TVS placed between fuse output and DC-DC converter input to clamp overvoltage before regulation. Use Value: 17.0V clamping prevents latch-up or gate oxide rupture in 28nm automotive SoCs rated for 16V absolute max input. |
Use Scenario: CAN_H and CAN_L lines in gateway ECUs subjected to ±30kV contact discharge per ISO10605. IC Role / Device Role / Timing Role: Bi-directional clamping (via dual SMBJ10AQ or dedicated bi-dir variant) shunts ESD energy to ground before transceiver I/O pins. Use Value: Sub-1nS response time and 17.0V VC limit bus voltage excursion to within CAN FD physical layer tolerance (±40V). |
| Body Control Module Input Protection | ADAS Camera Sensor Interface |
|
Use Scenario: Wake-up input (e.g., door handle switch) connected to BCM microcontroller GPIO, subject to cable discharge events. IC Role / Device Role / Timing Role: Unidirectional TVS referenced to vehicle ground, absorbing negative-going pulses from ISO7637-2 Pulse 3a (−220V). Use Value: 100A IFSM rating ensures survival of repeated mechanical switch bounce-induced transients without parameter shift. |
Use Scenario: FPD-Link III or GMSL serial video interface between radar camera and domain controller, routed through harnesses. IC Role / Device Role / Timing Role: Low-capacitance TVS (typ. 100pF @ 0V) placed differential across data pair to suppress coupled surges without signal integrity loss. Use Value: Clamping action preserves eye diagram margin for 3Gbps serial links by limiting common-mode overshoot to <17V. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar unidirectional automotive TVS applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMBJ10A-13-F (Diodes Inc.) | Lacks AEC-Q101 qualification and PPAP capability; same electrical specs but non-automotive grade | Acceptable for industrial or consumer prototypes; not approved for Tier-1 automotive production BOMs | Select only for cost-sensitive non-automotive designs where qualification is not required |
| SMAJ10A-Q (ON Semiconductor) | Lower 400W peak power; 18.2V clamping at 27.4A; identical VRWM and VBR range | Marginally adequate for ISO7637-2 Pulse 3b but insufficient for Pulse 1 (−150V) in high-impedance circuits | Use only where system-level testing confirms clamping margin meets OEM surge test limits |
Compared with SMBJ10AQ-13-F, the SMAJ10A-Q offers lower cost but sacrifices 200W peak power headroom and fails to meet AEC-Q101-making it unsuitable for production automotive ECUs requiring full ISO7637-2 compliance and audit-ready qualification records.
Availability
SMBJ10AQ-13-F is available at Aetrix Electronics and suitable for automotive infotainment systems, body control modules, and ADAS sensor interfaces requiring stable component supply with full AEC-Q101 traceability and IATF 16949 manufacturing assurance.
Supply support for SMBJ10AQ-13-F includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-reliability components for automotive, industrial, and computing markets with ISO/TS 16949 and IATF 16949 certified facilities.
This device belongs to Diodes' AEC-Q101-qualified SMBJ-AQ automotive TVS family, engineered specifically for ISO7637-2 and ISO10605 compliance in harsh-temperature vehicle subsystems.
FAQ
What is the polarity configuration of SMBJ10AQ-13-F?
SMBJ10AQ-13-F is a unidirectional TVS diode with cathode band marking on the package top surface. It conducts only during reverse-biased overvoltage events-clamping positive transients on the cathode side to the anode (ground) while blocking normal forward-biased 12V operation. This configuration matches standard automotive power rail protection topology.
Does SMBJ10AQ-13-F require heatsinking in typical automotive applications?
No additional heatsink is required. The device dissipates only transient energy (non-repetitive), and its 5.0W steady-state power rating at TL = +75°C is sufficient for PCB copper pour thermal relief. Derating curves confirm >80% peak power retention at +100°C ambient, making it suitable for under-dash mounting without forced airflow.
How does SMBJ10AQ-13-F perform under repeated ISO7637-2 Pulse 3b exposure?
Per datasheet specifications, SMBJ10AQ-13-F is rated for non-repetitive pulses only (max 4 pulses/minute). For systems requiring repetitive surge immunity, designers must implement external current-limiting impedance or verify cumulative junction temperature rise remains below +175°C using thermal modeling with actual board layout and pulse repetition rate.
Can SMBJ10AQ-13-F be used to protect bidirectional data lines like LIN or CAN?
No-it is unidirectional and unsuitable for bidirectional bus protection without external circuitry. For LIN or CAN, use the bi-directional variant SMBJ10CAQ-13-F or place two SMBJ10AQ-13-F devices in series opposition. Direct substitution risks forward conduction during normal bus signaling and violates ISO11898-2 common-mode voltage limits.
SMBJ10AQ-13-F Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Package/Case:
- DO-214AA, SMB
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 1
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 10V
- Voltage - Breakdown (Min):
- 11.1V
- Voltage - Clamping (Max) @ Ipp:
- 17V
- Current - Peak Pulse (10/1000µs):
- 35.3A
- Power - Peak Pulse:
- 600W
- Power Line Protection:
- No
- Applications:
- -
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SMB
SMBJ10AQ-13-F FAQ
1.How can I place an order for SMBJ10AQ-13-F through Aetrix?
Please submit a Request for Quotation (RFQ) for SMBJ10AQ-13-F on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SMBJ10AQ-13-F reliable?
The price and inventory of SMBJ10AQ-13-F are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SMBJ10AQ-13-F is usually 5 days.
3.What payment methods are accepted for SMBJ10AQ-13-F?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SMBJ10AQ-13-F transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SMBJ10AQ-13-F?
SMBJ10AQ-13-F orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SMBJ10AQ-13-F order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SMBJ10AQ-13-F?
For technical support, including SMBJ10AQ-13-F datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SMBJ10AQ-13-F requirements.
6.How does Aetrix verify that SMBJ10AQ-13-F is sourced from the original manufacturer or authorized distributors?
All SMBJ10AQ-13-F products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SMBJ10AQ-13-F meets industry standards.
7.What is the process for return or replacement of SMBJ10AQ-13-F?
All SMBJ10AQ-13-F units undergo pre-shipment inspection (PSI). If there is an issue with SMBJ10AQ-13-F, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SMBJ10AQ-13-F part is unused and in its original packaging.
Return procedure for SMBJ10AQ-13-F:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SMBJ10AQ-13-F Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
