My Inquiry
My Account
Texas Instruments TPD1E10B09DPYT
- Part No.:
- TPD1E10B09DPYT
- Manufacturer:
- Texas Instruments
- Category:
- TVS Diodes
- Package:
- 0402 (1006 Metric)
- Datasheet:
-
TPD1E10B09DPYT.pdf
- Description:
- TVS DIODE 9VWM 20VC 2X1SON
- Quantity:
- Payment:
- Shipping:
Inventory:8,213
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TPD1E10B09DPYT from Texas Instruments is a single-channel bidirectional ESD protection TVS diode in X1SON (DPY) 2-pin 0402 package, providing ±20 kV IEC 61000-4-2 Level 4 contact/air-gap ESD suppression, 10 pF I/O capacitance, and 0.5 Ω dynamic resistance for high-speed audio and GPIO lines in space-constrained wearables and tablets.
For engineers reviewing the TPD1E10B09DPYT datasheet, TPD1E10B09DPYT pinout, TPD1E10B09DPYT application, or TPD1E10B09DPYT equivalent, key selection criteria include clamping voltage at 1 A (≤13 V), reverse standoff voltage (±9 V), industrial temperature range (–40°C to 125°C), ultra-low leakage (≤100 nA), and compatibility with 500 Mbps data rates.
Technical Context
The TPD1E10B09DPYT implements a back-to-back TVS diode configuration enabling bipolar signal support across ±9 V operating range, with bidirectional breakdown voltage ≥±9.5 V and clamping voltage ≤13 V at 1 A transient current. Its 10 pF capacitance is measured at 1 MHz and 2.5 V bias, supporting distortion-free audio (20 Hz–20 kHz) and high-speed interfaces up to 500 Mbps.
As a passive clamp, it remains in high-impedance state below VRWM (±9 V), activates above VBR (±9.5 V), and dissipates surge energy via low RDYN (0.5 Ω typ), limiting voltage stress on protected ICs during ±20 kV ESD events and 4.5 A IEC 61000-4-5 surges.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| ESD Rating (IEC 61000-4-2) | ±20 kV contact & air-gap - meets Level 4 system-level immunity for consumer and industrial end equipment |
| Clamp Voltage (IPP = 1 A) | ≤13 V - limits voltage stress on downstream audio amplifier or MCU GPIO during ESD strike |
| I/O Capacitance | 10 pF @ 1 MHz, 2.5 V - enables clean 500 Mbps signal integrity without high-frequency attenuation |
| Dynamic Resistance | 0.5 Ω typical - ensures low voltage drop under transient current, improving clamping efficiency |
| Reverse Standoff Voltage | ±9 V - supports bidirectional signals up to ±8 V (e.g., audio lines, USB ID/VD pins) without leakage activation |
| Leakage Current | ≤100 nA @ 5 V - minimizes power loss in battery-powered wearables and remote controllers |
| Surge Rating (IEC 61000-4-5) | 4.5 A (8/20 µs) - provides robust protection against lightning-induced surges on exposed connectors |
Pinout & Package
X1SON (DPY) 2-pin 0402 package: 1.0 mm × 0.6 mm × 0.45 mm max height, industry-standard footprint with exposed thermal pad (not electrically connected), compatible with standard SMT reflow profiles (MSL Level-1).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | I/O | Bidirectional signal line terminal - connects directly to protected trace (e.g., microphone input, button line) |
| 2 | GND | Low-inductance ground return path - requires short, wide trace to minimize impedance during ESD discharge |
Key Features
| Feature | Design Value |
|---|---|
| Bidirectional TVS architecture | Enables protection of AC-coupled or dual-polarity signals (e.g., stereo audio, USB ID pin) without polarity constraints |
| 10 pF capacitance at 1 MHz | Preserves signal fidelity for audio (20 Hz–20 kHz) and high-speed digital lines up to 500 Mbps |
| 0.5 Ω dynamic resistance | Reduces clamping voltage overshoot during fast transients, enhancing protection margin for sensitive ICs |
| Industrial temperature range | Operates reliably from –40°C to 125°C - suitable for automotive cabin modules and outdoor IoT devices |
| Space-saving 0402 footprint | Minimizes PCB area in ultra-thin tablets, smartwatches, and compact EPOS terminals |
Applications
| Audio Line Protection | GPIO & Button Protection |
|---|---|
Use Scenario: Protecting microphone, earphone, and speaker phone lines in tablets and wearables from user-hand ESD. IC Role / Device Role / Timing Role: Bidirectional ESD clamp placed between connector and audio codec, shunting transients to ground before reaching analog front-end. Use Value: 10 pF capacitance avoids audio band attenuation; ±20 kV rating exceeds IEC 61000-4-2 Level 4 requirements for handheld devices. |
Use Scenario: Shielding mechanical push-buttons and capacitive touch keys in remote controllers and set-top boxes. IC Role / Device Role / Timing Role: Low-leakage (≤100 nA) TVS diode placed inline with microcontroller GPIO, preventing latch-up during repeated button actuation. Use Value: 0.5 Ω RDYN ensures rapid clamping (<1 ns response), suppressing ESD-induced resets without affecting debounce timing. |
| USB Interface Protection | EPOS Terminal I/O Protection |
Use Scenario: Safeguarding VBUS and ID pins of micro-USB ports in portable electronics against hot-plug and cable discharge events. IC Role / Device Role / Timing Role: Back-to-back diode configuration handles both positive and negative transients on bidirectional ID line and DC-biased VBUS. Use Value: ±9 V VRWM aligns with USB 2.0 signaling levels; 13 V clamping at 1 A prevents overvoltage damage to USB controller PHY. |
Use Scenario: Securing general-purpose I/O ports (RS-232, keypad scan lines) in electronic point-of-sale terminals exposed to retail environments. IC Role / Device Role / Timing Role: Primary ESD barrier at board edge, routing transients from customer-facing connectors directly to chassis ground. Use Value: 4.5 A IEC 61000-4-5 surge rating withstands induced surges from nearby AC mains switching in commercial settings. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ESD5V3U2U-2/TR | Higher capacitance (15 pF), lower clamping voltage (11 V @ 1 A), same 0402 X1SON package | Better suited for sub-200 Mbps interfaces where lower clamping outweighs capacitance penalty | Select when protecting low-speed GPIO or legacy USB where <11 V clamping is critical and 15 pF is acceptable |
| TPD1E05U06DPYT | Lower capacitance (5.5 pF), reduced ESD rating (±12 kV), same 2-pin X1SON footprint | Optimized for >1 Gbps high-speed lines (e.g., MIPI D-PHY) but insufficient for Level 4 system ESD | Choose only for bandwidth-critical applications requiring <6 pF; not recommended for tablet/audio ESD compliance |
Compared with ESD5V3U2U-2/TR and TPD1E05U06DPYT, the TPD1E10B09DPYT delivers the optimal balance of Level 4 ESD immunity, 10 pF capacitance for 500 Mbps support, and industrial temperature operation - making it the preferred choice for audio, USB, and general-purpose I/O protection in consumer and industrial portable devices.
Availability
TPD1E10B09DPYT is available at Aetrix Electronics and suitable for tablets, wearables, and electronic point-of-sale (EPOS) terminals requiring stable component supply with full traceability and long-term lifecycle support.
Supply support for TPD1E10B09DPYT includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor leader specializing in analog, embedded processing, and high-reliability power management solutions, with decades of expertise in ESD protection device design and qualification.
The TPD1E10B09DPYT belongs to TI's TPD family of ultra-small ESD protection diodes engineered specifically for high-density portable electronics - emphasizing minimal capacitance, robust system-level ESD immunity, and seamless integration into 0402-layout constrained designs.
FAQ
What is the maximum clamping voltage of the TPD1E10B09DPYT during an ESD event?
The TPD1E10B09DPYT has a maximum clamping voltage of 13 V when subjected to a 1 A transient current (8/20 µs waveform), and 17 V at 5 A. This low clamping level protects downstream components such as audio codecs and microcontrollers by limiting voltage stress during ±20 kV IEC 61000-4-2 ESD strikes. The clamping performance is guaranteed across the full industrial temperature range (–40°C to 125°C).
Can the TPD1E10B09DPYT be used to protect USB 2.0 data lines?
No - the TPD1E10B09DPYT is not recommended for USB 2.0 D+/D– differential pairs due to its 10 pF capacitance, which may degrade signal integrity at 480 Mbps. It is qualified for USB VBUS and ID pins (single-ended, DC-biased), audio lines, GPIO, and buttons. For USB 2.0 data lines, TI recommends lower-capacitance alternatives like TPD1E05U06DPYT (5.5 pF) or dedicated USB ESD arrays.
What is the package type and dimensions of the TPD1E10B09DPYT?
The TPD1E10B09DPYT uses the X1SON (DPY) 2-pin package - a 0402-sized no-lead outline measuring 1.0 mm × 0.6 mm × 0.45 mm max height. It features a bottom-exposed thermal pad (non-functional) and complies with JEDEC MSL Level-1 moisture sensitivity. The pin 1 index is located in Quadrant Q1 per tape-and-reel packaging specifications.
Does the TPD1E10B09DPYT require external power or biasing?
No - the TPD1E10B09DPYT is a passive bidirectional TVS diode and requires no external power, biasing, or control signals. It operates solely based on voltage threshold behavior: remaining high-impedance below ±9 V reverse standoff voltage and clamping transients above ±9.5 V breakdown voltage. Its 100 nA max leakage at 5 V ensures negligible impact on battery life in portable systems.
Is the TPD1E10B09DPYT suitable for automotive applications?
The TPD1E10B09DPYT is rated for industrial temperature (–40°C to 125°C) but is not AEC-Q200 qualified. For automotive use, TI offers the pin-compatible TPD1E10B09-Q1, which undergoes full automotive qualification including extended temperature testing, vibration, and humidity cycling. The TPD1E10B09DPYT may be used in non-safety-critical infotainment accessories, but not in ADAS or powertrain systems.
TPD1E10B09DPYT Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Package/Case:
- 0402 (1006 Metric)
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- -
- Bidirectional Channels:
- 1
- Voltage - Reverse Standoff (Typ):
- 9V (Max)
- Voltage - Breakdown (Min):
- 9.5V
- Voltage - Clamping (Max) @ Ipp:
- 20V
- Current - Peak Pulse (10/1000µs):
- 4.5A (8/20µs)
- Power - Peak Pulse:
- 90W
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 2-X1SON (1x.60)
TPD1E10B09DPYT FAQ
1.How can I place an order for TPD1E10B09DPYT through Aetrix?
Please submit a Request for Quotation (RFQ) for TPD1E10B09DPYT on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TPD1E10B09DPYT reliable?
The price and inventory of TPD1E10B09DPYT are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TPD1E10B09DPYT is usually 5 days.
3.What payment methods are accepted for TPD1E10B09DPYT?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TPD1E10B09DPYT transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TPD1E10B09DPYT?
TPD1E10B09DPYT orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TPD1E10B09DPYT order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TPD1E10B09DPYT?
For technical support, including TPD1E10B09DPYT datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TPD1E10B09DPYT requirements.
6.How does Aetrix verify that TPD1E10B09DPYT is sourced from the original manufacturer or authorized distributors?
All TPD1E10B09DPYT products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TPD1E10B09DPYT meets industry standards.
7.What is the process for return or replacement of TPD1E10B09DPYT?
All TPD1E10B09DPYT units undergo pre-shipment inspection (PSI). If there is an issue with TPD1E10B09DPYT, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TPD1E10B09DPYT part is unused and in its original packaging.
Return procedure for TPD1E10B09DPYT:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TPD1E10B09DPYT Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
