My Inquiry
My Account
onsemi UESD5.0DT5G
- Part No.:
- UESD5.0DT5G
- Manufacturer:
- onsemi
- Category:
- TVS Diodes
- Package:
- SOT-723
- Datasheet:
-
UESD5.0DT5G.pdf
- Description:
- TVS DIODE 5VWM SOT723
- Quantity:
- Payment:
- Shipping:
Inventory:35,260
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
UESD5.0DT5G from onsemi is a unidirectional ESD protection diode in SOT-723 package, featuring 5.0 V working peak reverse voltage (VRWM), 6.2 V minimum breakdown voltage (VBR), 38 pF typical capacitance at 0 V bias, <1 ns response time, and IEC61000-4-2 Level 4 (±30 kV air/±30 kV contact) ESD protection. It safeguards high-speed data lines in space-constrained portable electronics.
For engineers reviewing the UESD5.0DT5G datasheet, pinout, applications, or equivalent options, key selection criteria include clamping voltage under 12 V at 1 A IPP, low leakage (<0.1 µA at VRWM), AEC-Q101 qualification, and compatibility with 0.4 mm pitch PCB layouts.
Technical Context
This device operates as a single-channel, cathode-common dual-cathode unidirectional TVS diode. Its structure enables bidirectional ESD suppression on a single line using one anode and two cathodes - ideal for I/O line protection where polarity is fixed and board area is constrained.
The SOT-723 package (1.20 × 0.80 × 0.50 mm) supports reflow soldering up to 260 °C and meets MSL 1 requirements. Electrical behavior is characterized by sharp Zener-like breakdown at 6.2 V (min), clamping to ≤12 V at 1 A peak pulse current, and stable leakage below 0.1 µA across −55 °C to +150 °C junction temperature range.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRWM | 5.0 V - Maximum continuous reverse operating voltage before conduction begins; sets upper limit for signal swing in protected interface |
| VBR (min) | 6.2 V @ 1 mA - Ensures reliable turn-on above normal operating voltage while avoiding false triggering |
| VC @ IPP=1 A | ≤12 V - Clamping voltage limits transient overvoltage seen by downstream ICs during ESD events |
| C (typ) | 38 pF @ 0 V, 1 MHz - Low capacitance preserves signal integrity on USB 2.0, HDMI, or audio lines |
| ESD Rating | ±30 kV air / ±30 kV contact per IEC61000-4-2 Level 4 - Meets industrial and consumer immunity requirements |
| Response Time | <1 ns - Fast enough to suppress ESD transients before sensitive circuitry is damaged |
| Leakage Current | <0.1 µA @ 5.0 V - Minimizes power loss and avoids loading of high-impedance analog or RF nodes |
Pinout & Package
SOT-723 (Case 631AA, Style 4) is a 3-pin ultra-small surface-mount package measuring 1.20 mm × 0.80 mm × 0.50 mm with 0.40 mm lead pitch. Void-free thermosetting plastic body meets UL 94 V-0; matte tin lead finish supports Pb-free assembly.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Cathode | Common cathode connection for dual-cathode configuration; ties to system ground or low-impedance return path |
| 2 | Cathode | Second cathode terminal - electrically identical to Pin 1; enables compact layout with shared ground routing |
| 3 | Anode | Signal input terminal - connects to protected line (e.g., USB D+, HDMI TMDS+); conducts during negative ESD transients |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-compact footprint | 1.20 mm × 0.80 mm - Saves >60% board area vs. SOT-23, enabling protection on dense mobile PCBs |
| Low clamping voltage | ≤12 V @ 1 A IPP - Limits stress on 5 V-tolerant I/O pins without requiring additional series impedance |
| AEC-Q101 qualified | Qualified for automotive infotainment and ADAS sensor interfaces requiring robust ESD resilience |
| IEC61000-4-4 Level 4 EFT protection | Withstands 40 A fast transient bursts - protects against switching noise in power supply rails and control lines |
| Pb-free & RoHS compliant | 100% matte Sn finish - compatible with lead-free reflow profiles and global environmental regulations |
Applications
| USB 2.0 Data Lines | HDMI Interface Protection |
|---|---|
Use Scenario: Protecting D+ and D− lines in smartphone USB ports against repeated plug/unplug ESD events. IC Role / Device Role / Timing Role: Unidirectional transient voltage suppressor placed directly at connector, shunting ESD energy to ground before reaching USB transceiver. Use Value: 38 pF capacitance avoids signal rise-time degradation; 5.0 V VRWM aligns with USB 2.0 common-mode voltage range. | Use Scenario: Safeguarding TMDS+ and TMDS− differential pairs in portable media players against contact discharge near HDMI connectors. IC Role / Device Role / Timing Role: Line-side ESD clamp with matched capacitance on both legs to preserve differential impedance and minimize skew. Use Value: Dual-cathode configuration allows single-device protection of both polarities without extra components or layout asymmetry. |
| Automotive Infotainment Displays | Digital Camera Sensor Interfaces |
Use Scenario: ESD hardening of LVDS or FPD-Link II video data lanes between head unit and display module. IC Role / Device Role / Timing Role: Board-level ESD guard for high-speed serial links exposed to service technician handling and environmental charge buildup. Use Value: AEC-Q101 qualification ensures reliability under thermal cycling and vibration; 0.5 mm height avoids interference with stacked flex cables. | Use Scenario: Protecting MIPI CSI-2 clock and data lanes in compact camera modules from lens-mount ESD and static discharge during assembly. IC Role / Device Role / Timing Role: Point-of-entry transient suppressor mounted adjacent to image sensor connector, minimizing loop inductance. Use Value: <1 ns response time captures sub-nanosecond ESD pulses before they propagate into pixel array timing circuits. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ESD protection applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| UESD5.0D3T5G | Same electrical specs but in SOT-323 (2.1 × 1.3 × 0.95 mm); 2× larger footprint, higher thermal mass | Better power handling margin for high-repetition EFT events; less suitable for ultra-thin devices | Select when board space permits and higher steady-state power derating (525 mW vs. 240 mW) is needed |
| TPD2E001DRYR | 2-channel unidirectional; 5.5 V VRWM; 12 pF capacitance; no AEC-Q101 qualification | Lower capacitance benefits USB 3.0/MIPI D-PHY; lacks automotive qualification and IEC61000-4-4 rating | Select for high-speed digital interfaces where capacitance is critical and automotive compliance is not required |
Compared with UESD5.0D3T5G and TPD2E001DRYR, the UESD5.0DT5G uniquely balances ultra-small size, automotive qualification, and full IEC61000-4-2/4-4 compliance - making it optimal for space-limited, safety-conscious portable and automotive applications where both form factor and certification matter.
Availability
UESD5.0DT5G is available at Aetrix Electronics and suitable for USB 2.0 interface protection, HDMI signal line hardening, and automotive infotainment display designs requiring stable component supply and long-term lifecycle support.
Supply support for UESD5.0DT5G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi is a global semiconductor supplier delivering energy-efficient, intelligent power and sensing solutions for automotive, industrial, cloud, medical, and IoT applications.
The UESD5.0DT5G belongs to onsemi's ESD3.3DT5G Series - engineered specifically for board-level ESD protection in ultra-portable electronics where minimal capacitance, tiny footprint, and certified immunity are mandatory.
FAQ
What is the maximum clamping voltage of UESD5.0DT5G under ESD stress?
The UESD5.0DT5G clamps to ≤12 V at 1 A peak pulse current (IPP), as specified in its electrical characteristics table. This value represents the maximum voltage imposed on the protected line during standardized 8/20 µs surge events. The clamping performance is validated per IEC61000-4-2 testing conditions and remains consistent across the full operating temperature range of −55 °C to +150 °C. Designers should reference this VC value when verifying margin against the absolute maximum ratings of downstream ICs.
Is UESD5.0DT5G suitable for protecting bidirectional data lines like I²C?
No - UESD5.0DT5G is a unidirectional ESD diode optimized for single-polarity signal paths such as USB D+ or HDMI TMDS+. For bidirectional interfaces like I²C, a bidirectional ESD suppressor (e.g., UESD5.0D3T5G or NUP4105MR6T1G) is required to handle both positive and negative transients. Using UESD5.0DT5G on I²C would leave the line unprotected during negative excursions beyond VRWM, risking latch-up or damage to pull-up networks.
Does UESD5.0DT5G require external series resistance for USB 2.0 protection?
No - UESD5.0DT5G is designed for direct placement on USB 2.0 data lines without added series impedance. Its 38 pF capacitance and ≤12 V clamping voltage meet USB 2.0 eye diagram and signal integrity requirements when placed within 5 mm of the connector. External resistors are unnecessary unless specific system-level overshoot analysis indicates marginal timing margins - in which case layout optimization is preferred over adding lossy components.
What is the thermal resistance (RJA) of UESD5.0DT5G on FR-5 board?
The UESD5.0DT5G has a thermal resistance of 525 °C/W from junction to ambient on a standard FR-5 test board (1.0 × 0.75 × 0.62 in). This value reflects its ability to dissipate transient energy without exceeding the 150 °C maximum junction temperature. Derating begins above 25 °C at 1.9 mW/°C, limiting usable power dissipation to 240 mW at room temperature. Layout enhancements (e.g., thermal vias, copper pour) can improve actual RJA in production designs.
Can UESD5.0DT5G be used in place of UESD3.3DT5G in a 3.3 V system?
No - UESD5.0DT5G has a 5.0 V working peak reverse voltage (VRWM), making it unsuitable for direct replacement of UESD3.3DT5G in 3.3 V systems. At 3.3 V operation, UESD5.0DT5G's higher VRWM increases risk of insufficient margin against normal signal overshoot, potentially allowing damaging transients to pass unclamped. The UESD3.3DT5G (VRWM = 3.3 V) provides tighter voltage alignment and lower clamping onset for 3.3 V logic domains.
UESD5.0DT5G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Package/Case:
- SOT-723
- Series:
- uESD
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 2
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 5V (Max)
- Voltage - Breakdown (Min):
- 6.2V
- Voltage - Clamping (Max) @ Ipp:
- -
- Current - Peak Pulse (10/1000µs):
- -
- Power - Peak Pulse:
- -
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- 38pF @ 1MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-723
UESD5.0DT5G FAQ
1.How can I place an order for UESD5.0DT5G through Aetrix?
Please submit a Request for Quotation (RFQ) for UESD5.0DT5G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for UESD5.0DT5G reliable?
The price and inventory of UESD5.0DT5G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for UESD5.0DT5G is usually 5 days.
3.What payment methods are accepted for UESD5.0DT5G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for UESD5.0DT5G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for UESD5.0DT5G?
UESD5.0DT5G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your UESD5.0DT5G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for UESD5.0DT5G?
For technical support, including UESD5.0DT5G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your UESD5.0DT5G requirements.
6.How does Aetrix verify that UESD5.0DT5G is sourced from the original manufacturer or authorized distributors?
All UESD5.0DT5G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that UESD5.0DT5G meets industry standards.
7.What is the process for return or replacement of UESD5.0DT5G?
All UESD5.0DT5G units undergo pre-shipment inspection (PSI). If there is an issue with UESD5.0DT5G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The UESD5.0DT5G part is unused and in its original packaging.
Return procedure for UESD5.0DT5G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
UESD5.0DT5G Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
