International Rectifier AUIRFL014NTR

Overview

AUIRFL014NTR from International Rectifier is an Automotive N-channel HEXFET power MOSFET supplied in the TO-261-4, TO-261AA package. The device is used as a n-channel. switching element where drain-source voltage rating, conduction loss, gate charge, avalanche behavior, and package thermal resistance must be matched to the circuit.

For engineers reviewing the AUIRFL014NTR datasheet, AUIRFL014NTR pinout, AUIRFL014NTR application, or AUIRFL014NTR equivalent, this device is commonly used in power load switching, dc-dc converter stages, motor and inductive load control, and repair and bom continuity designs. For engineers comparing AUIRFL014NTR against other MOSFETs, the useful checks are voltage rating: 55 V., current rating: 1.5 A ambient class., RDS(on): 160 mΩ max at 1.9 A, 10 V. The bulk supply entry and package style should be confirmed before using it as a direct BOM replacement.

Technical Context

In a switching circuit, AUIRFL014NTR may serve as a low-side switch, high-side device, synchronous rectifier, motor-control transistor, battery-path switch, or converter power device depending on polarity and topology. The package tab or exposed pad normally carries the drain connection and dominates the thermal path.

TO-261-4, TO-261AA package; confirm footprint, pinout, and thermal path with the package drawing. Gate-drive selection should account for total gate charge, Miller plateau behavior, switching frequency, and allowable VGS range; using only RDS(on) to compare MOSFETs can lead to excessive switching loss or poor transient behavior.

Thermal validation is required at the final load current because rated current values assume defined case or board conditions. For inductive loads, the avalanche rating, body-diode recovery, clamp network, and safe operating area should be checked with the actual load profile.

Key Specifications

Pinout & Package

The AUIRFL014NTR pinout must be reviewed from the exact package drawing because terminal function, thermal path, and mechanical footprint are linked in this product family. TO-261-4, TO-261AA package information and Bulk packaging for this line.

For PCB design, use the package drawing and confirm copper area, soldering method, creepage or clearance where applicable, and the final orderable suffix before layout or replacement approval. TO-261-4, TO-261AA package; confirm footprint, pinout, and thermal path with the package drawing.

Key Features

• N-channel. power MOSFET for switching and power-control circuits.
• 55 V. voltage class should be derated against bus voltage and transient conditions.
• 160 mΩ max at 1.9 A, 10 V. on-resistance data supports conduction-loss estimation.
• Gate charge and Miller behavior should be checked for switching-frequency and driver selection.
• Body-diode, avalanche, and SOA behavior should be reviewed for inductive or reverse-current paths.
• TO-261-4, TO-261AA package controls PCB footprint, soldering method, and heat spreading.

Applications

Equivalent & Alternatives

When evaluating AUIRFL014NTR equivalent devices, engineers should compare only specific orderable alternatives and should verify package footprint, pinout, electrical ratings, thermal data, qualification status, and suffix or packing requirements before substitution.

Compared with related alternatives, AUIRFL014NTR should remain the preferred sourcing reference when the existing BOM, PCB footprint, and qualification documentation require the exact International Rectifier orderable device.

Quality

AUIRFL014NTR should be sourced as original International Rectifier / Infineon inventory through traceable and controlled supply channels. Quality verification may include package inspection, top-mark validation, label and lot review, solderability inspection, moisture-sensitivity handling review, and electrical screening according to the target production requirement.

Because AUIRFL014NTR is used in power switching and converter circuits, final validation should include the actual PCB footprint, thermal path, electrical stress, operating temperature, and fault-condition behavior. Traceable sourcing helps reduce counterfeit risk and supports repeatable performance in production, repair, and maintenance programs.

Availability

AUIRFL014NTR available at Aetrix Electronics and suitable for power switching and converter circuits requiring stable component supply, package matching, and controlled replacement planning.

Supply support may include scheduled delivery planning, volume procurement support, BOM continuity assistance, traceable sourcing management, and long-term availability support for OEM manufacturers, repair programs, and electronics production teams.

For production or repair deployment, confirming package type, orderable suffix, lifecycle status, environmental requirement, electrical rating, thermal condition, and sourcing continuity helps reduce procurement risk and improve manufacturing stability.

Manufacturer

International Rectifier was a semiconductor manufacturer known for power MOSFETs, IGBTs, gate drivers, power-management ICs, intelligent power switches, photovoltaic relays, and power modules. International Rectifier products became part of Infineon Technologies' power semiconductor portfolio after the acquisition of International Rectifier.

The AUIRFL014NTR ordering line should be reviewed with the relevant International Rectifier legacy technical documentation and Infineon supply-chain references where available. This is especially important for legacy MOSFETs, IRAM modules, PV relay products, and automotive AUIR power devices.

FAQ

What is AUIRFL014NTR used for?

AUIRFL014NTR is used in power switching and converter circuits. The exact application depends on the technical documentation electrical ratings, package, pinout, and thermal capability.

Where can I find the AUIRFL014NTR technical documentation?

The AUIRFL014NTR technical documentation should be obtained from International Rectifier / Infineon documentation or an authorized technical documentation source. It should be used to confirm ratings, package information, pinout, thermal data, and test conditions.

What should be considered in AUIRFL014NTR pinout design?

Pinout design should confirm the package drawing, terminal functions, thermal path, high-current routing or isolation spacing, and whether the orderable suffix changes package or packing details.

Can AUIRFL014NTR be used as a direct replacement?

AUIRFL014NTR can be used as a direct replacement only when the package footprint, pinout, electrical ratings, thermal behavior, and qualification status match the original design.

What are common AUIRFL014NTR equivalent solutions?

Equivalent solutions should be limited to specific orderable devices with verified technical documents. Suffix variants may differ in package, reel orientation, lead finish, qualification, or manufacturing status.