International Rectifier AUIRFU8403-701TRL

Overview

AUIRFU8403-701TRL from International Rectifier is an Automotive P-channel HEXFET MOSFET supplied in the TO-251-3 Short Leads, IPAK, TO-251AA package. The device is used as a p-channel. switching element where drain-source voltage rating, conduction loss, gate charge, avalanche behavior, and package thermal resistance must be matched to the circuit.

For engineers reviewing the AUIRFU8403-701TRL datasheet, AUIRFU8403-701TRL pinout, AUIRFU8403-701TRL application, or AUIRFU8403-701TRL equivalent, this device is commonly used in power load switching, dc-dc converter stages, motor and inductive load control, and repair and bom continuity designs. For engineers comparing AUIRFU8403-701TRL against other MOSFETs, the useful checks are voltage rating: −30 V class., RDS(on): AUIRFU8403 P-channel family. The bulk supply entry and package style should be confirmed before using it as a direct BOM replacement.

Technical Context

In a switching circuit, AUIRFU8403-701TRL may serve as a low-side switch, high-side device, synchronous rectifier, motor-control transistor, battery-path switch, or converter power device depending on polarity and topology. The package tab or exposed pad normally carries the drain connection and dominates the thermal path.

IPAK / TO-251 short-lead power package for compact through-hole or formed-lead power switching. Gate-drive selection should account for total gate charge, Miller plateau behavior, switching frequency, and allowable VGS range; using only RDS(on) to compare MOSFETs can lead to excessive switching loss or poor transient behavior.

Thermal validation is required at the final load current because rated current values assume defined case or board conditions. For inductive loads, the avalanche rating, body-diode recovery, clamp network, and safe operating area should be checked with the actual load profile.

Key Specifications

Pinout & Package

The AUIRFU8403-701TRL pinout must be reviewed from the exact package drawing because terminal function, thermal path, and mechanical footprint are linked in this product family. TO-251-3 Short Leads, IPAK, TO-251AA package information and Bulk packaging for this line.

For PCB design, use the package drawing and confirm copper area, soldering method, creepage or clearance where applicable, and the final orderable suffix before layout or replacement approval. IPAK / TO-251 short-lead power package for compact through-hole or formed-lead power switching.

Key Features

• P-channel. power MOSFET for switching and power-control circuits.
• −30 V class. voltage class should be derated against bus voltage and transient conditions.
• AUIRFU8403 P-channel family. on-resistance data supports conduction-loss estimation.
• Gate charge and Miller behavior should be checked for switching-frequency and driver selection.
• Body-diode, avalanche, and SOA behavior should be reviewed for inductive or reverse-current paths.
• TO-251-3 Short Leads, IPAK, TO-251AA package controls PCB footprint, soldering method, and heat spreading.

Applications

Equivalent & Alternatives

When evaluating AUIRFU8403-701TRL equivalent devices, engineers should compare only specific orderable alternatives and should verify package footprint, pinout, electrical ratings, thermal data, qualification status, and suffix or packing requirements before substitution.

Compared with related alternatives, AUIRFU8403-701TRL should remain the preferred sourcing reference when the existing BOM, PCB footprint, and qualification documentation require the exact International Rectifier orderable device.

Quality

AUIRFU8403-701TRL should be sourced as original International Rectifier / Infineon inventory through traceable and controlled supply channels. Quality verification may include package inspection, top-mark validation, label and lot review, solderability inspection, moisture-sensitivity handling review, and electrical screening according to the target production requirement.

Because AUIRFU8403-701TRL is used in power switching and converter circuits, final validation should include the actual PCB footprint, thermal path, electrical stress, operating temperature, and fault-condition behavior. Traceable sourcing helps reduce counterfeit risk and supports repeatable performance in production, repair, and maintenance programs.

Availability

AUIRFU8403-701TRL available at Aetrix Electronics and suitable for power switching and converter circuits requiring stable component supply, package matching, and controlled replacement planning.

Supply support may include scheduled delivery planning, volume procurement support, BOM continuity assistance, traceable sourcing management, and long-term availability support for OEM manufacturers, repair programs, and electronics production teams.

For production or repair deployment, confirming package type, orderable suffix, lifecycle status, environmental requirement, electrical rating, thermal condition, and sourcing continuity helps reduce procurement risk and improve manufacturing stability.

Manufacturer

International Rectifier was a semiconductor manufacturer known for power MOSFETs, IGBTs, gate drivers, power-management ICs, intelligent power switches, photovoltaic relays, and power modules. International Rectifier products became part of Infineon Technologies' power semiconductor portfolio after the acquisition of International Rectifier.

The AUIRFU8403-701TRL ordering line should be reviewed with the relevant International Rectifier legacy technical documentation and Infineon supply-chain references where available. This is especially important for legacy MOSFETs, IRAM modules, PV relay products, and automotive AUIR power devices.

FAQ

What is AUIRFU8403-701TRL used for?

AUIRFU8403-701TRL is used in power switching and converter circuits. The exact application depends on the technical documentation electrical ratings, package, pinout, and thermal capability.

Where can I find the AUIRFU8403-701TRL technical documentation?

The AUIRFU8403-701TRL technical documentation should be obtained from International Rectifier / Infineon documentation or an authorized technical documentation source. It should be used to confirm ratings, package information, pinout, thermal data, and test conditions.

What should be considered in AUIRFU8403-701TRL pinout design?

Pinout design should confirm the package drawing, terminal functions, thermal path, high-current routing or isolation spacing, and whether the orderable suffix changes package or packing details.

Can AUIRFU8403-701TRL be used as a direct replacement?

AUIRFU8403-701TRL can be used as a direct replacement only when the package footprint, pinout, electrical ratings, thermal behavior, and qualification status match the original design.

What are common AUIRFU8403-701TRL equivalent solutions?

Equivalent solutions should be limited to specific orderable devices with verified technical documents. Suffix variants may differ in package, reel orientation, lead finish, qualification, or manufacturing status.