My Inquiry
My Account
Diodes Incorporated DMN62D0UDW-7
- Part No.:
- DMN62D0UDW-7
- Manufacturer:
- Diodes Incorporated
- Category:
- FET, MOSFET Arrays
- Package:
- 6-TSSOP, SC-88, SOT-363
- Datasheet:
-
DMN62D0UDW-7.pdf
- Description:
- MOSFET 2N-CH 60V 0.35A SOT363
- Quantity:
- Payment:
- Shipping:
Inventory:19,695
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMN62D0UDW-7 from Diodes Incorporated is a dual N-channel enhancement-mode MOSFET in SOT363 package, rated for 60V VDSS, 2.0Ω RDS(on) @ VGS = 4.5V, and 350mA continuous drain current at +25°C. It integrates ESD-protected gates, low gate threshold (0.5–1.0V), and fast switching (tD(off) = 22.6ns) for compact power management in space-constrained motor control and load switching circuits.
For engineers reviewing the DMN62D0UDW-7 datasheet, DMN62D0UDW-7 pinout, DMN62D0UDW-7 application, or DMN62D0UDW-7 equivalent, key selection criteria include dual-channel RDS(on) matching at low VGS, thermal resistance (RθJA = 400°C/W on FR-4), and ultra-small SOT363 footprint suitability for high-density PCB layouts.
Technical Context
This dual MOSFET integrates two matched N-channel devices with independent gate terminals and shared source connections per channel (S1/G1/D1 and S2/G2/D2). Its low 1.8V gate threshold enables direct drive from 1.8V/2.5V logic, while low input capacitance (Ciss = 32pF) and gate charge (Qg = 0.5nC) support efficient high-frequency switching up to several MHz.
The device features integrated gate protection diodes and is characterized for operation from –55°C to +150°C junction temperature. Thermal performance is specified for both minimum pad layout (320mW PD) and enhanced 1"×1" 2oz copper (410mW PD), enabling design flexibility across consumer and industrial ambient conditions.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | 60V - supports 24V and 48V rail switching without avalanche stress |
| RDS(on) max | 2.0Ω @ VGS = 4.5V - ensures ≤0.35W conduction loss at 350mA |
| ID max | 350mA @ TA = +25°C - suitable for low-power load switching and signal routing |
| VGS(th) | 0.5–1.0V - enables full enhancement from 1.8V I/O microcontrollers |
| Ciss | 32pF - minimizes gate drive power and propagation delay in digital switching |
| tD(off) | 22.6ns - supports PWM frequencies >1MHz with predictable turn-off timing |
| RθJA | 400°C/W - requires minimal copper area for thermal management on standard FR-4 |
Pinout & Package
SOT363 (Standard) surface-mount package: 6-pin, 2.0mm × 2.225mm body, 0.65mm pitch, matte tin-plated alloy 42 leadframe, moisture sensitivity level 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (S1) | Source of Q1 | Low-side return path for first MOSFET; tied to ground or common source node |
| 2 (D1) | Drain of Q1 | Switched output terminal for Q1; connects to load or higher-potential rail |
| 3 (G1) | Gate of Q1 | Control input for Q1; requires <1.0V to turn on, protected by internal ESD diode |
| 4 (G2) | Gate of Q2 | Independent control input for second MOSFET; no cross-coupling with G1 |
| 5 (D2) | Drain of Q2 | Switched output terminal for Q2; electrically isolated from D1 |
| 6 (S2) | Source of Q2 | Separate return path for Q2; allows independent source referencing or floating configuration |
Key Features
| Feature | Design Value |
|---|---|
| Dual independent N-channel topology | Enables two separate low-side switches in one 2.2mm² footprint, reducing board area vs. discrete solutions |
| Low RDS(on) at 2.5V VGS | 2.5Ω - delivers usable on-resistance from 2.5V logic, eliminating level-shifting in battery-powered systems |
| ESD-protected gate structure | HBM rating ≥2kV - eliminates need for external gate protection in typical handling and assembly environments |
| Ultra-low input capacitance | Ciss = 32pF - reduces gate drive current demand and dynamic power loss in high-frequency operation |
| Lead-free & halogen-free construction | Meets RoHS 3 and JEDEC J-STD-020 Level 1 - supports automotive-qualified derivative (DMN62D0UDWQ) and green manufacturing requirements |
Applications
| Motor Control | Power Management |
|---|---|
Use Scenario: Bidirectional DC motor commutation in portable robotics and actuator modules. IC Role / Device Role / Timing Role: Dual low-side switch controlling H-bridge leg current direction and braking paths. Use Value: Matched RDS(on) ensures balanced forward/reverse torque; fast tF = 12.5ns minimizes shoot-through risk during polarity reversal. |
Use Scenario: Load switching for USB-C PD power path and auxiliary rail enable in wearables. IC Role / Device Role / Timing Role: Independent channel control of 3.3V/5V system rails with sequencing and fault isolation. Use Value: Low VGS(th) allows direct MCU GPIO drive; 0.006g weight supports ultra-lightweight end equipment. |
| Signal Routing | LED Driver Interface |
Use Scenario: Multiplexing analog sensor signals in medical patch monitors with minimal crosstalk. IC Role / Device Role / Timing Role: Low-capacitance analog switch replacing mechanical relays or larger logic arrays. Use Value: Coss = 3.9pF and low RDS(on) preserve signal integrity up to 10MHz bandwidth. |
Use Scenario: Current-sinking control of RGB LED strings in smart lighting modules. IC Role / Device Role / Timing Role: Dual-channel PWM dimming driver with independent brightness adjustment per color. Use Value: Fast tD(on) = 2.4ns enables precise 16-bit PWM resolution at 2kHz without duty-cycle distortion. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual N-channel MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMN62D0UDWQ | Automotive-qualified AEC-Q101, same electrical specs, IATF 16949 manufacturing | Required for automotive infotainment power stages and ADAS sub-modules | Select when PPAP documentation, change control, and extended temperature validation are mandatory |
| DMN62D0UW-7 | Single-channel version in identical SOT363 package, same RDS(on) and VDSS | Used where only one switch is needed, simplifying layout and BOM | Choose for cost-sensitive single-load applications; avoids unused channel overhead |
Compared with DMN62D0UDWQ, the base part lacks automotive qualification but offers identical performance at lower cost; versus DMN62D0UW-7, it provides dual-channel integration at no increase in footprint-critical for miniaturized multi-rail systems.
Availability
DMN62D0UDW-7 is available at Aetrix Electronics and suitable for motor control, power management, and signal routing applications requiring stable component supply, consistent SOT363 packaging, and RoHS-compliant sourcing.
Supply support for DMN62D0UDW-7 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-reliability power management, signal integrity, and protection solutions.
The DMN62D0UDW belongs to Diodes' low-voltage dual MOSFET product line, engineered for space-constrained, battery-operated systems where low gate drive voltage, matched channel performance, and minimal thermal footprint are critical.
FAQ
What is the maximum safe operating junction temperature for DMN62D0UDW-7?
The absolute maximum junction temperature is +150°C, verified per JEDEC standards. Operation above this limit risks permanent parametric shift or bondwire failure. Derating is required above +70°C ambient; at +85°C ambient, maximum continuous ID drops to 290mA per channel to maintain TJ ≤ 150°C under standard FR-4 mounting.
Can DMN62D0UDW-7 be used in linear (analog) mode?
No-it is optimized for switching operation only. The RDS(on) specification applies only in saturation; linear-region use causes uncontrolled thermal runaway due to positive temperature coefficient of RDS(on) and insufficient SOA margin below 10ms pulse width. Safe Operating Area curves in the datasheet confirm no DC linear capability.
Is the SOT363 package compatible with standard reflow profiles?
Yes-its moisture sensitivity level is 1 (unlimited floor life), and it withstands peak reflow temperatures up to 260°C per J-STD-020. Recommended profile uses ramp rate ≤3°C/s, preheat 150–200°C for 60–120s, soak 200–220°C for 60–120s, and peak 235–245°C for 20–40s, with cooling rate ≤6°C/s.
Does DMN62D0UDW-7 support back-to-back connection for AC switching?
No-its body diodes are oriented source-to-drain (S→D), preventing bidirectional blocking. Connecting two devices back-to-back would require external series diodes or a dedicated AC switch IC. The internal diode forward voltage (VSD = 0.8–1.3V) is specified only for unidirectional freewheeling in DC applications.
DMN62D0UDW-7 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 6-TSSOP, SC-88, SOT-363
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Technology:
- MOSFET (Metal Oxide)
- Configuration:
- 2 N-Channel (Dual)
- FET Feature:
- -
- Drain to Source Voltage (Vdss):
- 60V
- Current - Continuous Drain (Id) @ 25°C:
- 350mA
- Rds On (Max) @ Id, Vgs:
- 2Ohm @ 100mA, 4.5V
- Vgs(th) (Max) @ Id:
- 1V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 0.5nC @ 4.5V
- Input Capacitance (Ciss) (Max) @ Vds:
- 32pF @ 30V
- Power - Max:
- 320mW
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-363
DMN62D0UDW-7 FAQ
1.How can I place an order for DMN62D0UDW-7 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMN62D0UDW-7 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMN62D0UDW-7 reliable?
The price and inventory of DMN62D0UDW-7 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMN62D0UDW-7 is usually 5 days.
3.What payment methods are accepted for DMN62D0UDW-7?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMN62D0UDW-7 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMN62D0UDW-7?
DMN62D0UDW-7 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMN62D0UDW-7 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMN62D0UDW-7?
For technical support, including DMN62D0UDW-7 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMN62D0UDW-7 requirements.
6.How does Aetrix verify that DMN62D0UDW-7 is sourced from the original manufacturer or authorized distributors?
All DMN62D0UDW-7 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMN62D0UDW-7 meets industry standards.
7.What is the process for return or replacement of DMN62D0UDW-7?
All DMN62D0UDW-7 units undergo pre-shipment inspection (PSI). If there is an issue with DMN62D0UDW-7, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMN62D0UDW-7 part is unused and in its original packaging.
Return procedure for DMN62D0UDW-7:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMN62D0UDW-7 Tags
-
SSM6N7002KFU,LF
Toshiba Semiconductor and Storage
-
2N7002DW-7-F
Diodes Incorporated
-
SSM6L56FE,LM
Toshiba Semiconductor and Storage
-
SSM6N37FU,LF
Toshiba Semiconductor and Storage
-
2N7002DWH6327XTSA1
Infineon Technologies
-
2N7002BKS,115
Nexperia USA Inc.
-
DMG1016UDW-7
Diodes Incorporated
-
UM6K33NTN
Rohm Semiconductor
-
DMG6602SVT-7
Diodes Incorporated
-
EM6K34T2CR
Rohm Semiconductor
-
UM6K34NTCN
Rohm Semiconductor
-
DMG6601LVT-7
Diodes Incorporated
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
