My Inquiry
My Account
Diodes Incorporated DMP10H4D2SQ-7
- Part No.:
- DMP10H4D2SQ-7
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- TO-236-3, SC-59, SOT-23-3
- Datasheet:
-
DMP10H4D2SQ-7.pdf
- Description:
- MOSFET BVDSS: 61V~100V SOT23 T&R
- Quantity:
- Payment:
- Shipping:
Inventory:2,576
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP10H4D2SQ-7 from Diodes Incorporated is a 100V P-channel enhancement-mode MOSFET in SOT23 package, qualified to AEC-Q101 for automotive use. It delivers RDS(ON) = 4.2 Ω @ VGS = −10 V, ID = −0.27 A at TA = +25°C, and features integrated gate protection diode and ESD protection. It serves as a low-power load switch in DC-DC converters and solid-state relays.
For engineers reviewing the DMP10H4D2SQ-7 datasheet, DMP10H4D2SQ-7 pinout, DMP10H4D2SQ-7 application, or DMP10H4D2SQ-7 equivalent, key selection criteria include its −100 V VDSS, low gate threshold (−1.0 to −3.0 V), 87 pF Ciss, AEC-Q101 qualification, and SOT23 thermal resistance of 333 °C/W on FR-4.
Technical Context
This P-channel MOSFET operates with negative gate drive relative to source, enabling high-side switching without level-shifting circuitry in low-current power management rails. Its low VGS(TH) allows reliable turn-on from standard 3.3 V or 5 V logic in battery-operated systems.
The device integrates an ESD-protected gate structure and exhibits fast switching (tD(ON) = 3.3 ns, tF = 4.9 ns) with low total gate charge (Qg = 1.8 nC), supporting efficient operation in pulse-width modulated loads such as solenoid drivers and LED lamp controls.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | −100 V: Maximum drain-source blocking voltage for high-voltage automotive rail isolation |
| RDS(ON) | 4.2 Ω @ VGS = −10 V: On-resistance determines conduction loss in 270 mA continuous load paths |
| ID | −0.27 A @ TA = +25°C: Continuous drain current rating for ambient-limited thermal design |
| Ciss | 87 pF: Input capacitance impacts gate drive strength requirement and switching speed |
| Qg | 1.8 nC: Total gate charge defines minimum driver energy needed per switching cycle |
| RθJA | 333 °C/W: Junction-to-ambient thermal resistance on standard FR-4 board dictates max power dissipation |
| VGS(TH) | −1.0 to −3.0 V: Gate threshold enables direct interface with 3.3 V microcontroller GPIOs |
Pinout & Package
Package: SOT23 - surface-mount plastic package with 3 terminals, 0.008 g mass, UL 94V-0 rated molding compound, moisture sensitivity level 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Source) | Current return path for P-channel device | Connected to higher potential rail; defines reference for gate drive and body diode cathode |
| 2 (Gate) | Control terminal for channel inversion | ESD-protected input requiring < ±20 V drive; low Ciss eases driving from low-power logic |
| 3 (Drain) | Current output terminal | Connects to load; body diode anode enables reverse-current freewheeling in inductive applications |
Key Features
| Feature | Design Value |
|---|---|
| Low gate threshold voltage | VGS(TH) down to −1.0 V enables robust turn-on from 3.3 V logic without external level shifters |
| Integrated gate protection diode | On-die clamping diode prevents gate oxide damage during transient overvoltage events |
| ESD protection | HBM-rated per JESD22-A114; eliminates need for external TVS on gate line in most automotive sub-systems |
| Small SOT23 footprint | 2.9 mm × 1.3 mm outline supports high-density PCB layouts in space-constrained modules like body control units |
Applications
| DC-DC Converter Load Switch | Battery Management System Enable |
|---|---|
Use Scenario: Enables/disables 12 V auxiliary rail in automotive buck converter during sleep mode to reduce quiescent current. IC Role / Device Role / Timing Role: High-side P-channel switch controlled by MCU GPIO; operates in static on/off state with infrequent transitions. Use Value: Low RDS(ON) minimizes voltage drop and power loss (< 30 mW at 270 mA), extending battery life in always-on modules. | Use Scenario: Controls power to fuel pump controller or HVAC fan driver in battery-operated subsystems. IC Role / Device Role / Timing Role: Load switch isolating downstream circuitry; activated only during vehicle runtime to prevent parasitic drain. Use Value: AEC-Q101 qualification ensures reliability across −40°C to +125°C ambient, meeting ISO 16750-4 cold-cranking requirements. |
| Solid-State Relay Replacement | LED Lamp Driver |
Use Scenario: Replaces electromechanical relay in door lock actuator or mirror heater control. IC Role / Device Role / Timing Role: Low-duty-cycle switching element handling pulsed 100–500 mA loads with fast turn-off to suppress inductive kickback. Use Value: Fast tF = 4.9 ns and integrated body diode provide clean current commutation without external flyback diode. | Use Scenario: Drives 12 V LED arrays in interior lighting or dashboard backlighting. IC Role / Device Role / Timing Role: Constant-current sink switch modulated via PWM from microcontroller; operates at ≤1 kHz. Use Value: Low Qg = 1.8 nC reduces gate driver power consumption and enables use of low-cost discrete transistor drivers. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel MOSFET load switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMN10H4D2S-7 | N-channel counterpart with same RDS(ON) and VDSS, but requires high-side gate driver or bootstrap circuitry | Suitable only where layout permits low-side switching or driver IC integration | Select when system already uses N-channel drivers and board space allows repositioning load to ground side |
| AO3401 | Higher RDS(ON) (5.5 Ω @ −10 V), lower VDSS (−30 V), non-AEC-Q101 qualified | Limited to non-automotive industrial or consumer applications with <30 V rails | Choose for cost-sensitive non-automotive designs where −30 V rating suffices and AEC compliance is not required |
Compared with DMN10H4D2S-7 and AO3401, DMP10H4D2SQ-7 uniquely combines AEC-Q101 qualification, −100 V rating, and SOT23 form factor-making it the only option for space-constrained, high-voltage automotive load switching without external level-shifting support.
Availability
DMP10H4D2SQ-7 is available at Aetrix Electronics and suitable for DC-DC converters, battery management systems, and solid-state relay replacements requiring stable component supply across automotive production lifecycles.
Supply support for DMP10H4D2SQ-7 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design, manufacturing, and sales operations across Asia, Europe, and North America.
DMP10H4D2SQ-7 belongs to Diodes' AEC-Q101-qualified automotive MOSFET product line, engineered specifically for high-reliability, low-power load switching in harsh-environment vehicle subsystems including body electronics and power management.
FAQ
What is the maximum junction temperature for DMP10H4D2SQ-7?
The absolute maximum junction temperature is +150°C, as specified in the Absolute Maximum Ratings table. Operation above this limit risks permanent device failure. Derating curves in Figure 6 show RDS(ON) increases by ~2× from −55°C to +150°C, requiring thermal design margin for sustained 270 mA loads.
Does DMP10H4D2SQ-7 require an external gate resistor?
No external gate resistor is mandatory due to its low Qg (1.8 nC) and RG (15.3 Ω), but a 10 Ω series resistor is recommended to damp ringing and limit peak gate current during fast edge transitions in noisy automotive environments.
Can DMP10H4D2SQ-7 be used in linear (analog) regulation mode?
It is not designed for linear regulation. Its Safe Operating Area (Figure 12) shows DC operation is limited to ≤0.27 A at VDS < 10 V; higher VDS × ID products cause rapid thermal runaway due to low power dissipation (0.38 W) and high RθJA.
Is the body diode suitable for continuous freewheeling current?
Yes-the body diode supports up to −0.42 A continuous source current (IS) and has VSD = −0.82 V typical at −0.2 A, making it suitable for inductive load recovery in solenoid and relay drivers without adding external diodes.
DMP10H4D2SQ-7 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- TO-236-3, SC-59, SOT-23-3
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 100 V
- Current - Continuous Drain (Id) @ 25°C:
- 270mA (Ta)
- Drive Voltage (Max Rds On, Min Rds On):
- 4V, 10V
- Rds On (Max) @ Id, Vgs:
- 4.2Ohm @ 500mA, 10V
- Vgs(th) (Max) @ Id:
- 3V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 1.8 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 87 pF @ 25 V
- FET Feature:
- -
- Power Dissipation (Max):
- 380mW (Ta)
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-23-3
DMP10H4D2SQ-7 FAQ
1.How can I place an order for DMP10H4D2SQ-7 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP10H4D2SQ-7 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP10H4D2SQ-7 reliable?
The price and inventory of DMP10H4D2SQ-7 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP10H4D2SQ-7 is usually 5 days.
3.What payment methods are accepted for DMP10H4D2SQ-7?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP10H4D2SQ-7 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP10H4D2SQ-7?
DMP10H4D2SQ-7 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP10H4D2SQ-7 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP10H4D2SQ-7?
For technical support, including DMP10H4D2SQ-7 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP10H4D2SQ-7 requirements.
6.How does Aetrix verify that DMP10H4D2SQ-7 is sourced from the original manufacturer or authorized distributors?
All DMP10H4D2SQ-7 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP10H4D2SQ-7 meets industry standards.
7.What is the process for return or replacement of DMP10H4D2SQ-7?
All DMP10H4D2SQ-7 units undergo pre-shipment inspection (PSI). If there is an issue with DMP10H4D2SQ-7, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP10H4D2SQ-7 part is unused and in its original packaging.
Return procedure for DMP10H4D2SQ-7:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP10H4D2SQ-7 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
