My Inquiry
My Account
Diodes Incorporated DMP2060UFDB-13
- Part No.:
- DMP2060UFDB-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FET, MOSFET Arrays
- Package:
- 6-UDFN Exposed Pad
- Datasheet:
-
DMP2060UFDB-13.pdf
- Description:
- MOSFET 2P-CH 20V 3.2A 6UDFN
- Quantity:
- Payment:
- Shipping:
Inventory:4,124
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP2060UFDB from Diodes Incorporated is a dual P-channel enhancement-mode MOSFET in a U-DFN2020-6 (Type B) package, rated for -20V VDSS, 90mΩ RDS(ON) @ VGS = -4.5V, and -3.2A continuous drain current at TA = +25°C. It serves as a compact, low-profile load switch in portable power adaptors and battery-powered systems requiring efficient bidirectional power control.
For engineers reviewing the DMP2060UFDB datasheet, DMP2060UFDB pinout, DMP2060UFDB application, or DMP2060UFDB equivalent, key selection criteria include its dual-channel P-MOS topology, low gate charge (11nC @ VGS = -4.5V), 0.6mm max height, ESD-protected gate, and thermal resistance of 92°C/W (steady-state).
Technical Context
This dual P-channel MOSFET integrates two matched enhancement-mode transistors in a single ultra-thin 2.0×2.0mm U-DFN package with exposed drain pads for thermal performance. Its gate threshold voltage range (-0.35V to -1.4V) enables reliable turn-on with logic-level drive down to -2.5V, while low input capacitance (881pF Ciss) supports fast switching in high-frequency DC-DC and load-switching circuits.
The device features symmetric internal layout (S1/G1/D2 and S2/G2/D1), enabling independent channel control for redundant power paths or complementary half-bridge configurations. Body diode forward voltage is specified at -0.65V to -1.2V (IS = -3.0A), supporting reverse-current blocking and synchronous rectification in buck-derived topologies.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | -20V - Maximum drain-source blocking voltage for safe operation in 12V/15V rail applications |
| RDS(ON) | 90mΩ @ VGS = -4.5V - Enables ≤290mW conduction loss at 3.2A, critical for thermally constrained portable designs |
| ID (max) | -3.2A @ TA = +25°C - Continuous current rating suitable for USB-C PD load switches and battery protection ICs |
| Qg | 11nC @ VGS = -4.5V - Low gate charge reduces driver power and switching losses in 1–2MHz DC-DC controllers |
| Ciss | 881pF - Minimizes Miller effect and improves noise immunity in high-dV/dt environments like motor drivers |
| RθJA | 92°C/W - Thermal resistance measured on 1"×1" FR-4 PCB; defines maximum power dissipation under natural convection |
| VGS(TH) | -0.35V to -1.4V - Ensures guaranteed turn-on with standard 3.3V GPIO or PMIC output without level-shifting |
Pinout & Package
Package: U-DFN2020-6 (Type B), 2.0mm × 2.0mm × 0.6mm profile, exposed drain pads (D1/D2) for thermal dissipation, NiPdAu-plated terminals.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (D2) | Drain of Q2 | Exposed pad connection for Q2 drain; primary thermal path and high-current output node |
| 2 (G1) | Gate of Q1 | Control input for first MOSFET; requires <1.4V negative bias relative to source to fully enhance |
| 3 (S1) | Source of Q1 | Reference node for Q1; tied to system ground or intermediate rail in high-side switch configuration |
| 4 (S2) | Source of Q2 | Reference node for Q2; electrically isolated from S1 unless externally connected |
| 5 (G2) | Gate of Q2 | Independent control input for second MOSFET; enables dual-load or redundancy control |
| 6 (D1) | Drain of Q1 | Exposed pad connection for Q1 drain; symmetrical thermal and current path to Pin 1 |
Key Features
| Feature | Design Value |
|---|---|
| Low-profile U-DFN2020-6 (Type B) | 0.6mm max height enables use in space-constrained wearables and ultra-thin adapters |
| ESD-protected gate | ±10μA IGSS at ±8V ensures robustness against handling and board-level ESD events per IEC 61000-4-2 |
| Dual independent P-channel channels | Separate S1/G1/D1 and S2/G2/D2 terminals allow independent load control or parallel operation with current sharing |
| Halogen- and antimony-free "Green" construction | <900ppm Br, <900ppm Cl, <1000ppm Sb meets stringent environmental compliance for global consumer electronics |
| Low input capacitance (Ciss = 881pF) | Reduces gate drive power and improves switching speed in battery-powered systems with limited drive strength |
Applications
| USB-C Power Delivery Load Switch | Smartphone Battery Protection Circuit |
|---|---|
|
Use Scenario: Controls power delivery between USB-C port and system bus during hot-plug detection and fault isolation. IC Role / Device Role / Timing Role: Dual-channel P-MOSFET acts as back-to-back load switch to block reverse current and enable/discharge VBUS safely. Use Value: 90mΩ RDS(ON) limits voltage drop to <290mV at 3.2A, preserving PD negotiation margin; 0.6mm height fits under thin metal shields. |
Use Scenario: Isolates main battery from system during overvoltage, overtemperature, or short-circuit events detected by fuel gauge IC. IC Role / Device Role / Timing Role: Functions as primary high-side disconnect switch with body diode providing reverse-polarity protection. Use Value: -20V VDSS withstands Li-ion battery pack transients up to 18.5V; ESD-protected gate survives >2kV HBM in handheld assembly lines. |
| Wireless Charging Transmitter Module | Portable Medical Sensor Hub |
|
Use Scenario: Enables/disables power to Qi transmitter coil driver stage based on presence detection and thermal status. IC Role / Device Role / Timing Role: Dual P-MOS provides independent control of primary-side power and auxiliary bias rails. Use Value: 11nC Qg allows clean 500kHz switching with minimal gate driver overhead; 92°C/W RθJA sustains 1.4W dissipation in sealed enclosures. |
Use Scenario: Manages power sequencing between coin-cell backup, rechargeable Li-Po, and USB input in FDA-cleared wearable sensors. IC Role / Device Role / Timing Role: Acts as OR-ing switch and load-sharing controller across multiple input sources. Use Value: Matched RDS(ON) channels ensure balanced current distribution; RoHS/"Green" compliance satisfies medical supply chain traceability requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual P-channel load switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMP2075UFDB | Higher RDS(ON) (120mΩ @ -4.5V), lower ID (-2.5A), same package and pinout | Targeted at lower-power applications where thermal headroom is less constrained | Select when lower cost is prioritized over conduction loss and peak current capability |
| DMC2060UVT | Single-channel P-MOS, identical RDS(ON)/VDSS/package but no dual topology | Used where only one switched rail is required, simplifying layout and BOM | Choose for non-redundant, space-optimized single-load applications with identical electrical specs |
Compared with DMP2075UFDB and DMC2060UVT, the DMP2060UFDB uniquely delivers dual-channel control with lowest RDS(ON) in the U-DFN2020-6 footprint-enabling higher efficiency in multi-rail portable systems without increasing board area.
Availability
DMP2060UFDB is available at Aetrix Electronics and suitable for USB-C power delivery modules, smartphone battery protection circuits, and wireless charging transmitter designs requiring stable component supply and long-term lifecycle support.
Supply support for DMP2060UFDB includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-efficiency power management, signal integrity, and protection solutions for consumer, industrial, and automotive markets.
The DMP2060UFDB belongs to Diodes' U-DFN ultra-thin MOSFET product line, engineered specifically for space- and thermally constrained portable electronics requiring dual-channel, logic-level-compatible P-MOS switches.
FAQ
Is DMP2060UFDB suitable for hot-swap applications?
Yes. With its -20V VDSS, low RDS(ON), and ESD-protected gate, DMP2060UFDB supports controlled inrush limiting and fault isolation in hot-swap circuits. The dual-channel architecture allows independent enable/disable of upstream and downstream rails, and its 1.4W steady-state power dissipation accommodates brief surge currents up to -18A (10µs pulse).
What is the recommended PCB layout for thermal performance?
For optimal thermal performance, connect both exposed drain pads (Pins 1 and 6) to ≥100mm² copper pour on the top layer, with ≥4 thermal vias (0.3mm diameter) per pad to inner/ground planes. Maintain minimum 0.2mm solder mask opening around each pad and follow Diodes' suggested U-DFN2020-6 (Type B) pad layout (D2 = 0.5–0.7mm, E2 = 0.9–1.1mm).
Does DMP2060UFDB support bidirectional current flow?
No. As a P-channel enhancement-mode MOSFET, DMP2060UFDB conducts only from source to drain when VGS < VGS(TH). Its intrinsic body diode permits reverse current (drain to source) but does not support active bidirectional switching. For true bidirectional control, external circuitry or complementary N/P pairs are required.
Why is DMP2060UFDB marked "Not Recommended for New Design"?
Diodes Incorporated issued this designation due to the introduction of newer-generation devices (e.g., DMP2075UFDB) with improved RDS(ON) temperature coefficient and tighter VGS(TH) distribution. However, DMP2060UFDB remains fully qualified, in active production, and supported with full datasheet, reliability data, and long-term availability through Aetrix Electronics.
DMP2060UFDB-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 6-UDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Technology:
- MOSFET (Metal Oxide)
- Configuration:
- 2 P-Channel (Dual)
- FET Feature:
- -
- Drain to Source Voltage (Vdss):
- 20V
- Current - Continuous Drain (Id) @ 25°C:
- 3.2A
- Rds On (Max) @ Id, Vgs:
- 90mOhm @ 2.9A, 4.5V
- Vgs(th) (Max) @ Id:
- 1.4V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 18nC @ 8V
- Input Capacitance (Ciss) (Max) @ Vds:
- 881pF @ 10V
- Power - Max:
- 1.4W
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- U-DFN2020-6 (Type B)
DMP2060UFDB-13 FAQ
1.How can I place an order for DMP2060UFDB-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP2060UFDB-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP2060UFDB-13 reliable?
The price and inventory of DMP2060UFDB-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP2060UFDB-13 is usually 5 days.
3.What payment methods are accepted for DMP2060UFDB-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP2060UFDB-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP2060UFDB-13?
DMP2060UFDB-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP2060UFDB-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP2060UFDB-13?
For technical support, including DMP2060UFDB-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP2060UFDB-13 requirements.
6.How does Aetrix verify that DMP2060UFDB-13 is sourced from the original manufacturer or authorized distributors?
All DMP2060UFDB-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP2060UFDB-13 meets industry standards.
7.What is the process for return or replacement of DMP2060UFDB-13?
All DMP2060UFDB-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMP2060UFDB-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP2060UFDB-13 part is unused and in its original packaging.
Return procedure for DMP2060UFDB-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP2060UFDB-13 Tags
-
SSM6N7002KFU,LF
Toshiba Semiconductor and Storage
-
2N7002DW-7-F
Diodes Incorporated
-
SSM6L56FE,LM
Toshiba Semiconductor and Storage
-
SSM6N37FU,LF
Toshiba Semiconductor and Storage
-
2N7002DWH6327XTSA1
Infineon Technologies
-
2N7002BKS,115
Nexperia USA Inc.
-
DMG1016UDW-7
Diodes Incorporated
-
UM6K33NTN
Rohm Semiconductor
-
DMG6602SVT-7
Diodes Incorporated
-
EM6K34T2CR
Rohm Semiconductor
-
UM6K34NTCN
Rohm Semiconductor
-
DMG6601LVT-7
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
