My Inquiry
My Account
Diodes Incorporated DMP2200UDW-13
- Part No.:
- DMP2200UDW-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FET, MOSFET Arrays
- Package:
- 6-TSSOP, SC-88, SOT-363
- Datasheet:
-
DMP2200UDW-13.pdf
- Description:
- MOSFET 2P-CH 20V 0.9A SOT363
- Quantity:
- Payment:
- Shipping:
Inventory:51,806
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP2200UDW-13 from Diodes Incorporated is a dual P-channel enhancement-mode MOSFET in SOT363 package, rated for -20V VDS, 260mΩ RDS(on) at VGS = -4.5V, and -0.9A continuous drain current. It serves as a compact, low-loss load switch in space-constrained power management circuits such as portable battery-powered systems.
For engineers reviewing the DMP2200UDW-13 datasheet, DMP2200UDW-13 pinout, DMP2200UDW-13 application, or DMP2200UDW-13 equivalent, key selection criteria include verified dual-channel P-MOSFET topology, gate threshold voltage (-0.4V to -1.2V), thermal resistance (275°C/W), ESD-protected gate, and SOT363 mechanical compatibility with high-density PCB layouts.
Technical Context
This device integrates two independent P-channel MOSFETs sharing no internal connection-each channel features separate source, drain, and gate terminals. Its low RDS(on) at low gate drive (-2.5V) enables efficient operation from single-cell Li-ion or 3.3V logic rails.
The MOSFETs incorporate integrated gate protection diodes and are characterized for stable performance across -55°C to +150°C junction temperature range. Dynamic parameters-including 184pF Ciss, 2.1nC Qg, and 9.8ns tD(ON)-support fast switching in load-switching and battery-disconnect applications without excessive gate-drive overhead.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS Rating | -20V - Supports input rails up to 20V reverse polarity without breakdown |
| RDS(on) @ VGS = -4.5V | 260mΩ max - Enables ≤230mW conduction loss at 0.9A load current |
| ID Continuous | -0.9A @ TA = 25°C - Suitable for sub-1A load switching with FR-4 board thermal relief |
| VGS(th) | -0.4V to -1.2V - Ensures turn-on with standard 1.8V/2.5V/3.3V GPIO outputs |
| Ciss | 184pF - Low input capacitance reduces gate-drive energy and speeds switching |
| Qg | 2.1nC - Allows full enhancement with <1µC gate charge per channel |
| TJ Range | -55°C to +150°C - Validated for industrial and extended-temperature embedded use |
Pinout & Package
Package: SOT363 - 6-pin, surface-mount, dual-transistor outline with 0.65mm lead pitch; moisture sensitivity level 1 per J-STD-020; RoHS-compliant matte tin finish on Alloy 42 leadframe.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| S1 | Source of Channel 1 | Common return path for first P-MOSFET; tied to system ground or battery negative in high-side switch config |
| G1 | Gate of Channel 1 | Control input for Channel 1; requires negative VGS relative to S1 to conduct |
| D1 | Drain of Channel 1 | Switched output node for Channel 1; connects to load or downstream rail |
| S2 | Source of Channel 2 | Independent source terminal for second P-MOSFET; electrically isolated from S1 |
| G2 | Gate of Channel 2 | Separate control input for Channel 2; enables independent switching of two loads |
| D2 | Drain of Channel 2 | Second switched output node; supports dual-load isolation or redundancy schemes |
Key Features
| Feature | Design Value |
|---|---|
| Low RDS(on) at -2.5V VGS | 500mΩ max - Enables reliable turn-on from 2.5V logic without level-shifting |
| ESD-protected gate | HBM >2kV - Eliminates need for external gate protection in typical handling and assembly |
| Low input leakage | ±10µA IGSS - Prevents unintended gate bias drift during standby or low-power states |
| Fast switching | 9.8ns tD(ON), 45ns tf - Reduces transition losses in PWM-controlled power paths |
| Green construction | Halogen- and antimony-free, lead-free - Meets IPC-1752A material declaration requirements |
Applications
| Battery Protection Circuit | USB Power Delivery Switch |
|---|---|
Use Scenario: Isolating main Li-ion battery from system during deep sleep or fault conditions to prevent self-discharge. IC Role / Device Role / Timing Role: Dual-channel P-MOSFET acts as back-to-back load switch controlling both charge and discharge paths independently. Use Value: 260mΩ RDS(on) limits voltage drop to <235mV at 0.9A, preserving battery runtime and enabling precise low-current cutoff detection. | Use Scenario: Enabling/disabling VBUS power to USB-C peripherals based on enumeration status or policy decisions. IC Role / Device Role / Timing Role: Each channel controls upstream/downstream VBUS path; gate-driven by microcontroller GPIO with 1.8V–3.3V logic. Use Value: -1.2V VGS(th) max ensures robust turn-on even with degraded MCU output drive, avoiding brownout-induced disconnects. |
| Industrial Sensor Node Power Gating | Medical Wearable Load Management |
Use Scenario: Powering down analog front-end and ADC circuitry between sampling intervals in battery-operated condition monitoring devices. IC Role / Device Role / Timing Role: Dual switch isolates sensor supply (Channel 1) and signal-chain bias (Channel 2) with independent timing control. Use Value: 184pF Ciss and 2.1nC Qg allow full switching within 1µs using standard 10mA GPIO, minimizing wake-up latency. | Use Scenario: Managing power to Bluetooth radio, display, and biosensor subsystems in FDA-classified wearable patches. IC Role / Device Role / Timing Role: Provides redundant load switching with thermally isolated channels to meet IEC 62304 safety partitioning requirements. Use Value: -55°C to +150°C TJ rating supports sterilization cycles and body-worn thermal environments without derating. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual P-channel load switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMN2020LSD-13 | Single N-channel + integrated driver; requires external high-side control logic | Designed for active-low enable with built-in charge pump; not pin-compatible | Select when higher current (>2A) or integrated gate boosting is required |
| SI1027DL-T1-GE3 | Lower RDS(on) (150mΩ @ -4.5V) but only rated to -12V VDS; SOT-363 compatible | Limited to 12V systems; unsuitable for 16–20V battery backup or industrial 24V-derived rails | Choose for cost-sensitive 3.3V/5V-only designs where voltage margin is not critical |
Compared with DMN2020LSD-13 and SI1027DL-T1-GE3, DMP2200UDW-13 uniquely delivers -20V rating, true dual independent P-channel topology, and guaranteed -2.5V turn-on in the same SOT363 footprint-making it optimal for compact, wide-input-voltage battery management where channel independence and low-voltage logic compatibility are mandatory.
Availability
DMP2200UDW-13 is available at Aetrix Electronics and suitable for battery disconnect switches, USB power delivery controllers, and industrial sensor node power gating requiring stable component supply and long-term manufacturability.
Supply support for DMP2200UDW-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design and manufacturing operations across Asia and the Americas.
The DMP2200UDW belongs to Diodes' PowerMOS™ portfolio, engineered specifically for high-efficiency, low-voltage load switching in portable and space-constrained electronics where minimal conduction loss and logic-level gate drive are essential.
FAQ
What is the maximum safe operating voltage for DMP2200UDW-13?
The absolute maximum drain-source voltage (VDS) is -20V. Operation beyond this rating risks avalanche breakdown and permanent damage. Derating is recommended for reliability in transient-prone environments; sustained operation above -16V should include overvoltage clamping per the datasheet's safe operating area (SOA) curves.
Can DMP2200UDW-13 be used with 1.8V GPIO control signals?
Yes. With a gate-threshold voltage range of -0.4V to -1.2V, the device fully enhances when VGS ≤ -1.2V. A 1.8V GPIO pulling G1/G2 to ground yields VGS = -1.8V, well within specification and confirmed by RDS(on) = 1000mΩ @ VGS = -1.8V in the datasheet.
Is thermal derating required for continuous 0.9A operation?
Yes. At TA = 25°C on a standard FR-4 board (2oz copper, minimum pad layout), the 0.45W power dissipation limit corresponds to ~0.68A at 260mΩ. For 0.9A continuous, either reduce ambient temperature, improve heatsinking (e.g., 1-inch copper pour), or operate below 85°C ambient per the 0.7A rating at TA = 85°C.
Does DMP2200UDW-13 support back-to-back configuration for AC blocking?
No. While each channel is a standalone P-MOSFET, the device lacks internal series connection or shared substrate isolation required for true bidirectional blocking. Back-to-back use would require external wiring and careful gate biasing-this configuration is not validated or characterized in the datasheet and may compromise SOA or ESD robustness.
DMP2200UDW-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 6-TSSOP, SC-88, SOT-363
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Technology:
- MOSFET (Metal Oxide)
- Configuration:
- 2 P-Channel (Dual)
- FET Feature:
- -
- Drain to Source Voltage (Vdss):
- 20V
- Current - Continuous Drain (Id) @ 25°C:
- 900mA
- Rds On (Max) @ Id, Vgs:
- 260mOhm @ 880mA, 4.5V
- Vgs(th) (Max) @ Id:
- 1.2V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 2.1nC @ 4.5V
- Input Capacitance (Ciss) (Max) @ Vds:
- 184pF @ 10V
- Power - Max:
- 450mW
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-363
DMP2200UDW-13 FAQ
1.How can I place an order for DMP2200UDW-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP2200UDW-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP2200UDW-13 reliable?
The price and inventory of DMP2200UDW-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP2200UDW-13 is usually 5 days.
3.What payment methods are accepted for DMP2200UDW-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP2200UDW-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP2200UDW-13?
DMP2200UDW-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP2200UDW-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP2200UDW-13?
For technical support, including DMP2200UDW-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP2200UDW-13 requirements.
6.How does Aetrix verify that DMP2200UDW-13 is sourced from the original manufacturer or authorized distributors?
All DMP2200UDW-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP2200UDW-13 meets industry standards.
7.What is the process for return or replacement of DMP2200UDW-13?
All DMP2200UDW-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMP2200UDW-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP2200UDW-13 part is unused and in its original packaging.
Return procedure for DMP2200UDW-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP2200UDW-13 Tags
-
SSM6N7002KFU,LF
Toshiba Semiconductor and Storage
-
2N7002DW-7-F
Diodes Incorporated
-
SSM6L56FE,LM
Toshiba Semiconductor and Storage
-
SSM6N37FU,LF
Toshiba Semiconductor and Storage
-
2N7002DWH6327XTSA1
Infineon Technologies
-
2N7002BKS,115
Nexperia USA Inc.
-
DMG1016UDW-7
Diodes Incorporated
-
UM6K33NTN
Rohm Semiconductor
-
DMG6602SVT-7
Diodes Incorporated
-
EM6K34T2CR
Rohm Semiconductor
-
UM6K34NTCN
Rohm Semiconductor
-
DMG6601LVT-7
Diodes Incorporated
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
