My Inquiry
My Account
Diodes Incorporated DMP2200UFCL-7
- Part No.:
- DMP2200UFCL-7
- Manufacturer:
- Diodes Incorporated
- Category:
- FET, MOSFET Arrays
- Package:
- 6-UFDFN Exposed Pad
- Datasheet:
-
DMP2200UFCL-7.pdf
- Description:
- MOSFET 2P-CH 20V 1.7A 6UDFN
- Quantity:
- Payment:
- Shipping:
Inventory:2,232
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP2200UFCL-7 from Diodes Incorporated is a dual P-channel enhancement-mode MOSFET in a U-DFN1616-6 (Type F) package, rated for -20V VDSS, 200mΩ RDS(ON) at VGS = -4.5V, and -1.7A continuous drain current. It serves as a compact, low-loss load switch in space-constrained battery-powered systems.
For engineers reviewing the DMP2200UFCL-7 datasheet, DMP2200UFCL-7 pinout, DMP2200UFCL-7 application, or DMP2200UFCL-7 equivalent, key selection criteria include its AEC-Q101 qualification, 0.5mm profile, 2.56mm² footprint, thermal resistance of 80°C/W (with heatsink), and gate threshold range of -0.4V to -1.2V.
Technical Context
This dual MOSFET integrates two independent P-channel devices with integrated gate protection diodes on a single die. Each channel supports bidirectional body diode conduction and operates with gate drive voltages down to -1.5V, enabling direct interface with 1.8V/2.5V logic controllers.
The device uses trench-gate technology to achieve low RDS(ON) while maintaining robust ESD tolerance (HBM >2kV). Its U-DFN1616-6 package features NiPdAu-plated terminals and meets J-STD-020 Level 1 moisture sensitivity, supporting standard reflow profiles without baking.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | -20V - Maximum blocking voltage for battery disconnect in 12V/15V systems |
| RDS(ON) @ VGS = -4.5V | 200mΩ max - Enables ≤340mW conduction loss at 1.7A, critical for thermally limited PCBs |
| ID continuous | -1.7A @ TA = 25°C - Sustains full load in portable power rails with minimal derating |
| Qg | 2.2nC - Low gate charge reduces switching losses and driver complexity in DC-DC sequencing |
| RθJA | 80°C/W - Achievable with 1-inch² copper pour; enables 1.58W power dissipation in compact layouts |
| TJ range | -55°C to +150°C - Supports automotive under-hood and industrial ambient conditions |
| AEC-Q101 | Qualified - Meets stress test requirements for automotive electronics reliability |
Pinout & Package
U-DFN1616-6 (Type F) package: 1.6mm × 1.6mm × 0.5mm, thermally enhanced with exposed drain pads. Molded green compound, UL 94V-0 rated, NiPdAu terminal finish.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (D1) | Drain 1 | Primary high-side switch node for Channel 1; tied to internal drain pad for thermal path |
| Pin 2 (S1) | Source 1 | Return path for Channel 1; electrically isolated from S2 for dual independent switching |
| Pin 3 (G1) | Gate 1 | Control input for Channel 1; protected by integrated Zener clamp diode to ±8V |
| Pin 4 (D2) | Drain 2 | Drain node for Channel 2; shares thermal pad but electrically separate from D1 |
| Pin 5 (S2) | Source 2 | Return path for Channel 2; enables dual independent load control without cross-talk |
| Pin 6 (G2) | Gate 2 | Independent control input for Channel 2; identical drive requirements to G1 |
Key Features
| Feature | Design Value |
|---|---|
| 0.5mm profile | Enables use in ultra-thin consumer wearables and medical patches where Z-height is constrained |
| 2.56mm² footprint | Reduces PCB area by >40% vs. SO-8 equivalents, freeing space for RF or sensor layout |
| Integrated gate protection diodes | Eliminates need for external TVS components in noisy automotive CAN/LIN bus environments |
| AEC-Q101 qualification | Validates reliability for 15-year automotive service life under temperature cycling and humidity exposure |
| Lead-free & halogen-free | Complies with EU RoHS 2 and JEDEC JS709C, supporting global environmental compliance programs |
Applications
| Battery Disconnect Switch | USB-C Power Delivery Load Switch |
|---|---|
Use Scenario: Isolating Li-ion battery packs during sleep mode or fault conditions in portable diagnostics equipment. IC Role / Device Role / Timing Role: Dual-channel high-side switch controlling main battery and backup coin-cell rails independently. Use Value: 200mΩ RDS(ON) limits standby leakage to <1.5µA per channel, extending shelf life beyond 18 months. | Use Scenario: Enabling/disabling VBUS paths in USB-C receptacles supporting 3A/5V PD contracts. IC Role / Device Role / Timing Role: Dual P-MOSFET load switch managing upstream/downstream VBUS isolation with fast turn-on (<10ns delay). Use Value: 2.2nC Qg allows clean 5V rail switching using 3.3V GPIO without level shifters. |
| Automotive Body Control Module | Industrial Sensor Node Power Gating |
Use Scenario: Controlling LED lighting zones and window motor drivers in 12V vehicle subsystems. IC Role / Device Role / Timing Role: Dual high-side switch providing short-circuit protected power delivery to actuators. Use Value: AEC-Q101 rating ensures operation across -40°C to +125°C ambient, meeting ISO 16750-4 requirements. | Use Scenario: Powering MEMS accelerometers and gas sensors only during active measurement cycles in IIoT nodes. IC Role / Device Role / Timing Role: Low-quiescent-load power gate enabling sub-µA deep-sleep current in battery-operated edge devices. Use Value: 0.5mm height and 2.56mm² footprint allow integration into 10mm × 10mm sensor modules with no Z-axis penalty. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual P-channel load switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMN2020LFG-7 | Single-channel, same package; RDS(ON) = 190mΩ @ -4.5V but lacks dual configuration | Requires two devices for dual-rail control, increasing BOM count and layout area | Select when only one switched rail is needed and board space permits discrete duplication |
| SI3993DV-T1-GE3 | Dual P-channel, SO-8 package; RDS(ON) = 220mΩ @ -4.5V, 1.2mm height | Higher profile and larger footprint (12.9mm²) limit use in ultra-thin designs | Prefer when legacy SO-8 assembly lines are in place and thermal margin exceeds 100°C/W |
Compared with DMN2020LFG-7 and SI3993DV-T1-GE3, DMP2200UFCL-7 uniquely delivers dual independent switching in a 0.5mm-profile U-DFN, enabling simultaneous rail control within 2.56mm²-critical for next-gen wearable and automotive domain controllers.
Availability
DMP2200UFCL-7 is available at Aetrix Electronics and suitable for battery disconnect switches, USB-C power delivery load management, and automotive body control modules requiring stable component supply across extended product lifecycles.
Supply support for DMP2200UFCL-7 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design centers across Asia and manufacturing in China, Taiwan, and the US.
The DMP2200UFCL belongs to Diodes' Automotive-Grade Power MOSFET family, engineered specifically for compact, high-reliability load switching in 12V/24V automotive and industrial power domains.
FAQ
What is the maximum safe operating voltage for DMP2200UFCL-7 in continuous DC applications?
The absolute maximum drain-source voltage is -20V, verified per DS36619 Rev. 4–2. Operation above -18V is not recommended for long-term reliability in automotive environments due to derating requirements per AEC-Q101 stress testing. At -20V, the device remains within SOA limits only up to 10ms pulse duration at room temperature.
Can DMP2200UFCL-7 be used with 1.8V GPIO for gate control?
Yes - the gate threshold voltage ranges from -0.4V to -1.2V, and RDS(ON) is specified down to VGS = -1.5V (650mΩ). At 1.8V logic high, a -1.8V gate drive is achievable with simple inverter or level-shifter circuitry, delivering usable conduction for low-current loads.
Does the U-DFN1616-6 package require special PCB layout considerations for thermal performance?
Yes - the datasheet specifies that 1-inch² copper area with 2oz copper is required to achieve the 80°C/W RθJA. The exposed drain pads (D1 and D2) must be connected via ≥4 thermal vias (0.3mm diameter) to inner ground planes. Solder mask defined pads are mandatory to prevent solder wicking during reflow.
Is DMP2200UFCL-7 suitable for reverse polarity protection in 12V systems?
Yes - configured as a high-side P-channel switch with source tied to input and drain to load, it provides inherent reverse polarity protection. With -20V VDSS and -1.7A rating, it supports full 12V system operation including cold-crank transients up to -14V, provided gate drive remains ≥|VGS(th)| during startup.
DMP2200UFCL-7 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 6-UFDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Technology:
- MOSFET (Metal Oxide)
- Configuration:
- 2 P-Channel (Dual)
- FET Feature:
- -
- Drain to Source Voltage (Vdss):
- 20V
- Current - Continuous Drain (Id) @ 25°C:
- 1.7A
- Rds On (Max) @ Id, Vgs:
- 200mOhm @ 2A, 4.5V
- Vgs(th) (Max) @ Id:
- 1.2V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 2.2nC @ 4.5V
- Input Capacitance (Ciss) (Max) @ Vds:
- 184pF @ 10V
- Power - Max:
- 660mW
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- U-DFN1616-6 (Type F)
DMP2200UFCL-7 FAQ
1.How can I place an order for DMP2200UFCL-7 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP2200UFCL-7 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP2200UFCL-7 reliable?
The price and inventory of DMP2200UFCL-7 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP2200UFCL-7 is usually 5 days.
3.What payment methods are accepted for DMP2200UFCL-7?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP2200UFCL-7 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP2200UFCL-7?
DMP2200UFCL-7 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP2200UFCL-7 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP2200UFCL-7?
For technical support, including DMP2200UFCL-7 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP2200UFCL-7 requirements.
6.How does Aetrix verify that DMP2200UFCL-7 is sourced from the original manufacturer or authorized distributors?
All DMP2200UFCL-7 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP2200UFCL-7 meets industry standards.
7.What is the process for return or replacement of DMP2200UFCL-7?
All DMP2200UFCL-7 units undergo pre-shipment inspection (PSI). If there is an issue with DMP2200UFCL-7, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP2200UFCL-7 part is unused and in its original packaging.
Return procedure for DMP2200UFCL-7:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP2200UFCL-7 Tags
-
SSM6N7002KFU,LF
Toshiba Semiconductor and Storage
-
2N7002DW-7-F
Diodes Incorporated
-
SSM6L56FE,LM
Toshiba Semiconductor and Storage
-
SSM6N37FU,LF
Toshiba Semiconductor and Storage
-
2N7002DWH6327XTSA1
Infineon Technologies
-
2N7002BKS,115
Nexperia USA Inc.
-
DMG1016UDW-7
Diodes Incorporated
-
UM6K33NTN
Rohm Semiconductor
-
DMG6602SVT-7
Diodes Incorporated
-
EM6K34T2CR
Rohm Semiconductor
-
UM6K34NTCN
Rohm Semiconductor
-
DMG6601LVT-7
Diodes Incorporated
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
