My Inquiry
My Account
Diodes Incorporated DMP3006LPSWQ-13
- Part No.:
- DMP3006LPSWQ-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- 8-PowerTDFN
- Datasheet:
-
DMP3006LPSWQ-13.pdf
- Description:
- MOSFET BVDSS: 25V~30V POWERDI506
- Quantity:
- Payment:
- Shipping:
Inventory:8,188
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP3006LPSWQ-13 from Diodes Incorporated is a P-channel enhancement-mode MOSFET in PowerDI5060-8 (SWP) package, rated for -30V VDSS, 7.5mΩ RDS(ON) @ VGS = -10V, and -92A continuous drain current at TC = +25°C. It serves as a high-current load switch in notebook battery power-management systems, delivering low conduction loss and fast switching in thermally constrained thin-profile designs.
For engineers reviewing the DMP3006LPSWQ-13 datasheet, DMP3006LPSWQ-13 pinout, DMP3006LPSWQ-13 application, or DMP3006LPSWQ-13 equivalent, key selection criteria include its AEC-Q101 qualification, 1.3°C/W RθJC, <1.1mm profile, and -76A body diode rating-critical for automotive-grade DC-DC converter and hot-swap circuit design.
Technical Context
This MOSFET employs a trench-gate silicon process optimized for low RDS(ON) while preserving gate charge (Qg = 106nC @ VGS = -10V) and switching speed (tF = 93ns). Its symmetric dual-drain layout in PowerDI5060-8 enables high-current routing through exposed drain pads.
The device features a gate threshold voltage range of -1.1V to -2.1V, enabling robust turn-on with standard logic-level drivers, and integrates 1kV HBM ESD protection. Thermal performance is defined by RθJC = 1.3°C/W and RθJA = 50.5°C/W on 1-inch² copper, supporting high-power density PCB layouts.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | -30V - Withstands reverse-biased drain-source voltage up to -30V without breakdown. |
| RDS(ON) | 7.5mΩ @ VGS = -10V - Enables ≤0.75W conduction loss at 10A, critical for thermal management in compact loads. |
| ID (TC = +25°C) | -92A - Supports high-current battery discharge paths in notebook power rails. |
| Qg | 106nC @ VGS = -10V - Determines gate driver power requirement and switching transition time in PWM circuits. |
| RθJC | 1.3°C/W - Allows direct thermal coupling to heatsink or PCB copper, enabling >100W dissipation with modest ΔT. |
| VGS(TH) | -1.1 to -2.1V - Ensures reliable turn-on with 3.3V or 5V logic-level gate drive, reducing external level-shifter need. |
| Ciss | 5639pF - Impacts high-frequency gate drive impedance and EMI behavior in fast-switching DC-DC stages. |
Pinout & Package
Package: PowerDI5060-8 (SWP), surface-mount, thermally enhanced with exposed drain pad. Dimensions: 5.15 × 6.40 × 1.00 mm, profile <1.1 mm, RoHS-compliant matte tin finish.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 3, 4, 5, 6, 7, 8 (Drain) | Drain (D) | Eight parallel drain terminals connected to internal die and exposed copper pad-provides low-inductance, high-current path and primary thermal conduction path to PCB. |
| Gate (G) | Gate (G) | Single gate terminal located at pin 1 per top-view marking; controls channel conduction with negative VGS; requires stable -10V bias for full RDS(ON) performance. |
| Source (S) | Source (S) | Source terminals at pins 2–8 (shared with drain layout); forms return path for load current and reference for gate drive in high-side switch configurations. |
Key Features
| Feature | Design Value |
|---|---|
| Thermally efficient package | PowerDI5060-8 exposes drain metal directly to PCB, achieving RθJC = 1.3°C/W for minimal junction-to-case thermal resistance. |
| Low RDS(ON) at logic-level drive | 11mΩ @ VGS = -4.5V enables use with 5V microcontrollers without gate boosting, reducing BOM count in portable systems. |
| Fast switching with controlled Qgd | Qgd = 20nC limits Miller plateau duration, supporting >1MHz operation in synchronous buck converters. |
| AEC-Q101 qualified | Validated for automotive applications including infotainment power rails and ADAS subsystems requiring PPAP documentation and IATF 16949 manufacturing control. |
| <1.1mm profile | Enables integration into ultra-thin notebooks and space-constrained industrial controllers where Z-height is limited to 1.1mm max. |
Applications
| Notebook Battery Protection | Automotive Infotainment Power Rail |
|---|---|
|
Use Scenario: Bidirectional battery disconnect during overvoltage/overcurrent events in ultrabook battery packs. IC Role / Device Role / Timing Role: High-side P-channel load switch controlling main battery feed to system power controller. Use Value: 7.5mΩ RDS(ON) minimizes voltage drop and self-heating during sustained 76A discharge, extending battery runtime and thermal margin. |
Use Scenario: Controlled power-up sequencing of display and audio ICs in vehicle head units. IC Role / Device Role / Timing Role: AEC-Q101-qualified load switch enabling safe hot-swap and inrush limiting for 12V supply domains. Use Value: -30V rating and -55°C to +150°C operating range ensure reliability across automotive ambient extremes and load dump transients. |
| High-Efficiency DC-DC Converter | Industrial Hot-Swap Module |
|
Use Scenario: Synchronous rectification in 5V/3.3V point-of-load converters for FPGA and SoC power delivery. IC Role / Device Role / Timing Role: Low-side P-channel switch complementing N-channel high-side in buck topology with fast tF = 93ns. Use Value: Coss = 500pF and Qg = 106nC enable high-frequency (>500kHz) operation with reduced switching loss and EMI. |
Use Scenario: Redundant 24V power supply insertion in programmable logic controllers (PLCs). IC Role / Device Role / Timing Role: Inrush-limited main power switch with integrated body diode (IS = -76A) for back-to-back configuration. Use Value: 1kV HBM ESD rating and 153mJ avalanche energy (EAS) withstand transient surges during live insertion without clamping diodes. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel load switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMT3006LPSWQ-13 | Same die, identical RDS(ON) and Qg, but non-automotive grade (no AEC-Q101, no PPAP support). | Lacks automotive qualification documentation and change control-unsuitable for Tier-1 automotive programs. | Select only for cost-sensitive industrial or consumer designs where AEC-Q101 is not required. |
| SI7157DP-T1-GE3 | Higher RDS(ON) (12mΩ @ -10V), larger SO-8 package (1.75mm height), lower ID (-60A), no AEC-Q101. | Not suitable for thin-profile or high-current applications; lacks automotive compliance and thermal performance. | Consider only if legacy SO-8 footprint compatibility is mandatory and current demand is ≤60A. |
Compared with DMT3006LPSWQ-13 and SI7157DP-T1-GE3, DMP3006LPSWQ-13 uniquely combines AEC-Q101 qualification, <1.1mm profile, and -92A current capability-making it the only option for next-gen automotive infotainment and ultra-thin notebook power switches requiring both space and reliability constraints.
Availability
DMP3006LPSWQ-13 is available at Aetrix Electronics and suitable for notebook battery management, automotive infotainment power rails, and industrial hot-swap modules requiring stable component supply, long-term lifecycle assurance, and traceable sourcing.
Supply support for DMP3006LPSWQ-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-efficiency power management and signal integrity solutions for automotive, industrial, and computing markets.
This device belongs to Diodes' PowerMOS™ portfolio, engineered specifically for high-current, low-RDS(ON) load switching in thermally demanding and space-constrained applications such as portable computing and automotive electronics.
FAQ
What is the maximum allowable gate-source voltage for DMP3006LPSWQ-13?
The absolute maximum VGS is ±20V per the datasheet's Maximum Ratings table. Exceeding this risks permanent gate oxide damage. For reliable operation, keep VGS between -10V (for lowest RDS(ON)) and -4.5V (logic-level compatible), with transient spikes clamped below ±18V using external Zener protection.
Can DMP3006LPSWQ-13 be used in a high-side switch configuration?
Yes-it is a P-channel MOSFET optimized for high-side switching. Its -30V VDSS and -92A ID rating allow direct connection between battery rail and load, with gate driven relative to source. Requires negative gate drive or level-shifted control for full enhancement, especially at high input voltages.
How does the PowerDI5060-8 package improve thermal performance over SO-8?
PowerDI5060-8 uses an exposed drain pad soldered directly to large PCB copper areas, achieving RθJA = 50.5°C/W (vs. ~62°C/W for SO-8) and RθJC = 1.3°C/W (vs. ~3.5°C/W). This reduces junction temperature rise by >25°C at 50W dissipation, enabling higher continuous current in compact layouts.
Is the body diode suitable for reverse-current blocking in back-to-back configurations?
Yes-the integrated body diode supports -76A continuous forward current and -359A pulsed current, with VSD = -0.7V typical at -1A. In back-to-back arrangements for bidirectional blocking, two DMP3006LPSWQ-13 devices provide robust reverse-polarity and surge protection without external diodes.
DMP3006LPSWQ-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-PowerTDFN
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 30 V
- Current - Continuous Drain (Id) @ 25°C:
- 15A (Ta), 92A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 4.5V, 10V
- Rds On (Max) @ Id, Vgs:
- 7.5mOhm @ 10A, 10V
- Vgs(th) (Max) @ Id:
- 2.1V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 106 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 5639 pF @ 15 V
- FET Feature:
- -
- Power Dissipation (Max):
- 1.6W
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount, Wettable Flank
- Supplier Device Package:
- PowerDI5060-8 (Type UX)
DMP3006LPSWQ-13 FAQ
1.How can I place an order for DMP3006LPSWQ-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP3006LPSWQ-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP3006LPSWQ-13 reliable?
The price and inventory of DMP3006LPSWQ-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP3006LPSWQ-13 is usually 5 days.
3.What payment methods are accepted for DMP3006LPSWQ-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP3006LPSWQ-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP3006LPSWQ-13?
DMP3006LPSWQ-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP3006LPSWQ-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP3006LPSWQ-13?
For technical support, including DMP3006LPSWQ-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP3006LPSWQ-13 requirements.
6.How does Aetrix verify that DMP3006LPSWQ-13 is sourced from the original manufacturer or authorized distributors?
All DMP3006LPSWQ-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP3006LPSWQ-13 meets industry standards.
7.What is the process for return or replacement of DMP3006LPSWQ-13?
All DMP3006LPSWQ-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMP3006LPSWQ-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP3006LPSWQ-13 part is unused and in its original packaging.
Return procedure for DMP3006LPSWQ-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP3006LPSWQ-13 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
