My Inquiry
My Account
Diodes Incorporated DMP3007LSS-13
- Part No.:
- DMP3007LSS-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
DMP3007LSS-13.pdf
- Description:
- MOSFET P-CH 30V 14A 8SO T&R 2
- Quantity:
- Payment:
- Shipping:
Inventory:2,636
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP3007LSS-13 from Diodes Incorporated is a P-channel enhancement-mode MOSFET in SO-8 package, rated for -30V VDSS, 7.0 mΩ RDS(ON) @ VGS = -10V, and -17A continuous drain current at TA = +25°C. It serves as a high-efficiency synchronous rectifier or load switch in low-voltage DC-DC converters.
For engineers reviewing the DMP3007LSS-13 datasheet, DMP3007LSS-13 pinout, DMP3007LSS-13 application, or DMP3007LSS-13 equivalent, key selection criteria include gate threshold voltage (-1.0 to -2.8 V), low input capacitance (2826 pF), fast switching (tD(OFF) = 306 ns), ESD-protected gate, and thermal resistance (RθJA = 59 °C/W under enhanced layout).
Technical Context
This MOSFET operates in enhancement mode with negative gate control logic, requiring VGS ≤ -1.0 V to initiate conduction and full enhancement at VGS = -10 V. Its body diode supports reverse recovery (tRR = 19 ns, QRR = 9.8 nC) in buck converter freewheeling paths.
The device integrates an ESD-protected gate structure and uses matte tin–annealed copper leadframe for solderability. Thermal performance is specified for two mounting conditions: standard FR-4 (RθJA = 91 °C/W) and enhanced 2 oz copper with thermal bias (RθJA = 59 °C/W).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | -30 V - Maximum blocking voltage in off-state; suitable for 24 V rail systems with margin. |
| RDS(ON) | 7.0 mΩ @ VGS = -10 V - Enables <100 mW conduction loss at 12 A, critical for high-efficiency power stages. |
| ID (continuous) | -17 A @ TA = +25°C - Supports high-current load switching in compact SO-8 footprint. |
| Qg | 64.2 nC @ VGS = -10 V - Determines gate drive power requirement and switching speed in hard-switched topologies. |
| Ciss | 2826 pF - Low input capacitance reduces Miller effect and improves gate drive efficiency. |
| tRR | 19 ns - Fast body diode recovery minimizes shoot-through risk and switching losses in synchronous rectification. |
| RθJA | 59 °C/W (enhanced layout) - Enables ~35°C rise at 2.1 W dissipation, supporting thermally constrained PCB designs. |
Pinout & Package
Package: SO-8 (Surface-Mount, 8-pin, 4.90 mm × 6.00 mm × 1.45 mm height), RoHS-compliant green molding compound (UL 94V-0), matte tin–annealed copper leadframe.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 3, 4 | Source (S) | Common source connection; pins 1–4 internally bonded to reduce parasitic inductance in high-current paths. |
| 5, 6, 7, 8 | Drain (D) | Power output terminal; pins 5–8 tied to exposed drain pad for thermal and current handling. |
| Gate (G) | Control input | Pin 3 is gate; isolated from source/drain by oxide; ESD-protected per HBM >2 kV. |
Key Features
| Feature | Design Value |
|---|---|
| Low RDS(ON) | 7.0 mΩ @ -10 V enables <1 W conduction loss at 12 A, reducing thermal load in space-constrained DC-DC modules. |
| Fast switching | tD(OFF) = 306 ns and tF = 125 ns support >500 kHz operation in synchronous buck converters without excessive gate drive overhead. |
| ESD-protected gate | HBM-rated protection eliminates need for external gate protection in typical industrial environments. |
| Green packaging | Halogen- and antimony-free (<900 ppm Br/Cl, <1000 ppm Sb) meets strict environmental compliance for automotive and medical end equipment. |
Applications
| LED Backlight Driver | USB-C Power Delivery Switch |
|---|---|
Use Scenario: High-side dimming control for LCD panel backlight strings in portable displays. IC Role / Device Role / Timing Role: P-channel high-side switch enabling PWM-controlled current sourcing to LED strings. Use Value: Low RDS(ON) minimizes voltage drop across switch, preserving headroom for boost converter output; fast turn-off prevents LED ghosting during PWM transitions. | Use Scenario: Input power path management in USB-C PD sink applications with 20 V max input. IC Role / Device Role / Timing Role: Reverse-polarity and overcurrent protected high-side load switch for VBUS routing. Use Value: -30 V rating provides 10 V margin above USB-C PD 20 V max; ESD protection guards against hot-plug transients. |
| Point-of-Load DC-DC Converter | Industrial PLC I/O Module |
Use Scenario: Synchronous rectifier in 12 V → 3.3 V buck converter supplying FPGA core voltage. IC Role / Device Role / Timing Role: Low-side synchronous rectifier replacing Schottky diode to improve efficiency. Use Value: 19 ns reverse recovery time and low QRR reduce switching losses by >30% vs. discrete diode solution at 1 MHz. | Use Scenario: 24 V DC load switching for solenoid drivers and relay coils in programmable logic controller outputs. IC Role / Device Role / Timing Role: Robust high-side power switch with integrated thermal derating behavior. Use Value: RDS(ON) variation <15% from -55°C to +150°C ensures stable current delivery across industrial temperature range. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMN3016LSD-13 | RDS(ON) = 10.5 mΩ @ -4.5 V; higher Qg (42 nC); SO-8 package | Slightly lower efficiency at light loads due to higher threshold; better suited for gate-driven-only (no bootstrap) circuits | Select when gate drive is limited to -4.5 V and lower cost is prioritized over peak efficiency. |
| SI2307DS-T1-GE3 | RDS(ON) = 28 mΩ @ -4.5 V; smaller SOT-23 package; lower ID (-4.5 A) | Not suitable for >5 A loads; used in ultra-compact low-power switches where board area is critical | Choose only for space-constrained, low-current (<4 A) applications where SO-8 footprint is unacceptable. |
Compared with DMN3016LSD-13 and SI2307DS-T1-GE3, DMP3007LSS-13 delivers superior conduction efficiency at high current and robust thermal performance in SO-8, making it optimal for industrial DC-DC and power distribution where both loss and reliability are design-critical.
Availability
DMP3007LSS-13 is available at Aetrix Electronics and suitable for LED backlight drivers, USB-C power delivery switches, and point-of-load DC-DC converters requiring stable component supply and long-term industrial lifecycle support.
Supply support for DMP3007LSS-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design, manufacturing, and sales operations across Asia, Europe, and the Americas.
This device belongs to Diodes' PowerMOS™ portfolio, engineered specifically for high-efficiency, high-reliability power switching in industrial, computing, and consumer power management systems.
FAQ
What is the maximum safe operating junction temperature for DMP3007LSS-13?
The absolute maximum junction temperature is +150°C, and the device is characterized for operation across -55°C to +150°C. Derating begins at TJ > 125°C per the Safe Operating Area (SOA) curve in Figure 12, where pulse current capability decreases with increasing temperature and pulse duration.
Can DMP3007LSS-13 be used in avalanche mode?
Yes - it is rated for single-pulse avalanche energy EAS = 87 mJ and current IAS = -13 A with L = 1 mH. This capability supports inductive load switching in relay drivers and motor control, but repetitive avalanche is not guaranteed and requires careful layout and thermal design.
Is the SO-8 package thermally enhanced?
No - the standard SO-8 package has no exposed thermal pad. However, thermal performance is improved via 2 oz copper thermal bias to a 1-inch square bottom-layer copper plate, achieving RθJA = 59 °C/W (vs. 91 °C/W on standard FR-4), as defined in Note 6 of the datasheet.
Does DMP3007LSS-13 require a gate resistor for stability?
A gate resistor (e.g., 6 Ω as used in timing tests) is recommended to dampen ringing caused by gate-drain capacitance (Crss = 305 pF) and PCB inductance. Without it, overshoot and oscillation may occur during fast switching, especially in high-di/dt applications like synchronous rectification.
DMP3007LSS-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 30 V
- Current - Continuous Drain (Id) @ 25°C:
- 14A (Ta)
- Drive Voltage (Max Rds On, Min Rds On):
- 4V, 10V
- Rds On (Max) @ Id, Vgs:
- 7mOhm @ 17A, 10V
- Vgs(th) (Max) @ Id:
- 2.8V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 64.2 nC @ 10 V
- Vgs (Max):
- ±25V
- Input Capacitance (Ciss) (Max) @ Vds:
- 2826 pF @ 15 V
- FET Feature:
- -
- Power Dissipation (Max):
- 1.4W (Ta)
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SO
DMP3007LSS-13 FAQ
1.How can I place an order for DMP3007LSS-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP3007LSS-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP3007LSS-13 reliable?
The price and inventory of DMP3007LSS-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP3007LSS-13 is usually 5 days.
3.What payment methods are accepted for DMP3007LSS-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP3007LSS-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP3007LSS-13?
DMP3007LSS-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP3007LSS-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP3007LSS-13?
For technical support, including DMP3007LSS-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP3007LSS-13 requirements.
6.How does Aetrix verify that DMP3007LSS-13 is sourced from the original manufacturer or authorized distributors?
All DMP3007LSS-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP3007LSS-13 meets industry standards.
7.What is the process for return or replacement of DMP3007LSS-13?
All DMP3007LSS-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMP3007LSS-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP3007LSS-13 part is unused and in its original packaging.
Return procedure for DMP3007LSS-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP3007LSS-13 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
