My Inquiry
My Account
Diodes Incorporated DMP3007SPSQ-13
- Part No.:
- DMP3007SPSQ-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- -
- Datasheet:
-
DMP3007SPSQ-13.pdf
- Description:
- MOSFET 25V~30V POWERDI5060-8
- Quantity:
- Payment:
- Shipping:
Inventory:3,005
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP3007SPSQ-13 from Diodes Incorporated is a P-channel enhancement-mode MOSFET in PowerDI5060-8 package, rated for -30V VDSS, 7mΩ RDS(ON) @ VGS = -10V, and -90A continuous drain current at TC = +25°C. It serves as a high-current power switch in automotive DC-DC converters and backlighting circuits, qualified to AEC-Q101 with PPAP support and IATF 16949 manufacturing.
For engineers reviewing the DMP3007SPSQ-13 datasheet, DMP3007SPSQ-13 pinout, DMP3007SPSQ-13 application, or DMP3007SPSQ-13 equivalent, key selection criteria include low RDS(ON) at -4.5V gate drive, thermally efficient exposed-drain package, AEC-Q101 qualification, and robust unclamped inductive switching capability.
Technical Context
This MOSFET employs a trench-gate silicon process optimized for low on-resistance and fast switching in high-side load-switch and synchronous rectifier configurations. Its gate threshold voltage range (-1.0V to -3.0V) ensures reliable turn-on with standard automotive logic-level drivers.
The device integrates an ESD-protected gate structure and features a monolithic body diode with 19ns reverse recovery time and 9.8nC QRR, enabling efficient operation in hard-switched topologies. Thermal resistance RθJC of 1.5°C/W supports high-power density layouts when mounted on copper-poured PCBs.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | -30V - Withstands up to -30V drain-source blocking voltage before avalanche conduction. |
| RDS(ON) | 7mΩ @ VGS = -10V - Enables <1W conduction loss at 11.5A, critical for thermal management in compact automotive modules. |
| ID (continuous) | -90A @ TC = +25°C - Supports high-current power rails in engine control units and ADAS domain controllers. |
| Qg | 64.2nC @ VGS = -10V - Determines gate driver strength requirement; enables fast turn-on with <5ns delay under 6Ω source impedance. |
| EAS | 130mJ - Sustains single-pulse inductive energy without failure, essential for motor driver and solenoid control reliability. |
| TJ range | -55°C to +150°C - Validated for under-hood automotive environments including transmission control and battery management systems. |
Pinout & Package
Package: PowerDI5060-8 - Thermally enhanced surface-mount package with exposed drain pad for direct PCB heat sinking; 8-terminal configuration with dual-source/dual-drain paralleling for current sharing.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (Green Mark) | Source | Primary source connection; tied internally to three additional source terminals (Pins 3, 5, 7) for low-inductance, high-current return path. |
| Pins 2, 4, 6, 8 | Drain | Four paralleled drain terminals connected to large exposed copper pad; provides <1.5°C/W junction-to-case thermal path. |
| Pin ? (center) | Gate | Single gate terminal (Pin 2 in top-view schematic); isolated by integrated ESD protection diode to prevent latch-up during hot-plug events. |
Key Features
| Feature | Design Value |
|---|---|
| Low RDS(ON) at -4.5V | 16mΩ - Enables full-load operation with 3.3V/5V microcontroller GPIOs without level-shifting, reducing BOM count in infotainment power supplies. |
| 100% UIS tested | 130mJ EAS - Guarantees ruggedness against inductive kickback in seat-motor H-bridges and fuel-pump drivers without external snubbers. |
| Thermally optimized package | RθJA = 47°C/W (2oz Cu) - Allows >2.7W dissipation on standard FR-4, eliminating need for heatsinks in 12V/24V automotive auxiliary rails. |
| AEC-Q101 qualification | PPAP-capable, IATF 16949 production - Meets zero-defect requirements for safety-critical lighting and ADAS subsystems with traceable lot control. |
Applications
| Automotive LED Headlamp Driver | 12V Battery Disconnect Switch |
|---|---|
|
Use Scenario: High-side current control for adaptive front-lighting systems with dynamic beam shaping. IC Role / Device Role / Timing Role: P-channel high-side switch regulating 5–15A per channel with PWM dimming up to 2kHz. Use Value: 7mΩ RDS(ON) limits conduction loss to <0.8W at 10A, enabling sealed headlamp thermal design without forced air cooling. |
Use Scenario: Isolation of auxiliary battery circuits during engine start or fault conditions. IC Role / Device Role / Timing Role: Reverse-polarity protected main power switch with fast turn-off (<310ns tD(OFF)) for load dump response. Use Value: -30V rating and 160A pulsed current capability handle ISO 7637-2 Load Dump transients without derating. |
| DC-DC Buck Converter High-Side Switch | Automotive Infotainment Power Sequencer |
|
Use Scenario: Primary switching element in 12V-to-5V/3.3V buck regulators for telematics modules. IC Role / Device Role / Timing Role: Synchronous rectifier replacement for Schottky diode in high-efficiency (>92%) converters operating at 300–500kHz. Use Value: 31.2nC Qg at -4.5V enables efficient gate driving with low-power controllers, reducing switching losses by 35% vs. discrete alternatives. |
Use Scenario: Controlled power-up sequencing of display, audio processor, and connectivity ICs in head units. IC Role / Device Role / Timing Role: Soft-start enabled high-side load switch with controlled slew rate via external RC on gate. Use Value: Gate threshold (-1.0V to -3.0V) allows precise turn-on timing using simple resistor-divider bias, eliminating dedicated sequencer ICs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMT3007LPSQ-13 | Same die, PowerDI3333 package (smaller footprint, higher RθJA = 62°C/W) | Limited to ≤40A continuous due to thermal constraints; unsuitable for under-hood ambient >105°C | Select when board space is constrained and peak current <45A; verify thermal margin with 1oz Cu layout. |
| IPD250N03LG | 30V, 2.5mΩ @ -10V, TO-252 package, higher Qg (95nC) | Requires stronger gate driver; lacks AEC-Q101 qualification and PPAP documentation | Use only in non-automotive industrial applications where cost outweighs qualification requirements. |
Compared with DMT3007LPSQ-13 and IPD250N03LG, the DMP3007SPSQ-13 uniquely balances AEC-Q101 compliance, 90A current capacity, and 47°C/W thermal performance in a surface-mount package-making it the only option qualified for high-reliability automotive power switching where both current density and supply-chain traceability are mandatory.
Availability
DMP3007SPSQ-13 is available at Aetrix Electronics and suitable for automotive LED lighting, battery management systems, and DC-DC converter designs requiring stable component supply across multi-year vehicle production cycles.
Supply support for DMP3007SPSQ-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global semiconductor company specializing in discrete, analog, and mixed-signal solutions, with design centers across Asia, Europe, and the US, serving automotive, industrial, and consumer markets.
The DMP3007SPSQ belongs to Diodes' AEC-Q101-qualified PowerMOS portfolio, engineered specifically for high-current, high-reliability automotive power switching where thermal efficiency, transient robustness, and supply-chain assurance are non-negotiable.
FAQ
What is the maximum allowable gate-source voltage for DMP3007SPSQ-13?
The absolute maximum VGS rating is ±25V. Operation beyond ±20V risks permanent gate oxide damage, while sustained bias above ±15V accelerates long-term degradation. For automotive 12V systems, a 15V zener clamp is recommended on the gate line to survive load-dump transients.
Does DMP3007SPSQ-13 require a gate resistor for stability?
Yes-a 2.2Ω to 10Ω series gate resistor is required to dampen ringing caused by LGS/Ciss resonance. Without it, measured tR and tF increase by >40%, raising switching losses and EMI emissions in 200–500kHz DC-DC applications.
Can DMP3007SPSQ-13 be used in parallel configurations?
Yes-its negative temperature coefficient of RDS(ON) (normalized to 1.8× at 150°C) enables inherent current sharing. Parallel operation requires matched gate drive routing, identical PCB copper area per device, and thermal coupling via shared heatsink or thick copper plane to maintain <5°C inter-device ΔT.
Is the PowerDI5060-8 package lead-free and RoHS compliant?
Yes-the terminal finish is matte tin annealed over copper leadframe, fully compliant with EU RoHS 2015/863/EU (RoHS 3), halogen-free (<900ppm Br+Cl), and antimony-free (<1000ppm), certified per Diodes' "Green" product definition and UL 94V-0 flammability rating.
DMP3007SPSQ-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 30 V
- Current - Continuous Drain (Id) @ 25°C:
- 90A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 4.5V, 10V
- Rds On (Max) @ Id, Vgs:
- 7mOhm @ 15A, 10V
- Vgs(th) (Max) @ Id:
- 3V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 64.2 nC @ 10 V
- Vgs (Max):
- ±25V
- Input Capacitance (Ciss) (Max) @ Vds:
- 2826 pF @ 15 V
- FET Feature:
- -
- Power Dissipation (Max):
- 1.4W (Ta)
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- -
- Supplier Device Package:
- -
DMP3007SPSQ-13 FAQ
1.How can I place an order for DMP3007SPSQ-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP3007SPSQ-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP3007SPSQ-13 reliable?
The price and inventory of DMP3007SPSQ-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP3007SPSQ-13 is usually 5 days.
3.What payment methods are accepted for DMP3007SPSQ-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP3007SPSQ-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP3007SPSQ-13?
DMP3007SPSQ-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP3007SPSQ-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP3007SPSQ-13?
For technical support, including DMP3007SPSQ-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP3007SPSQ-13 requirements.
6.How does Aetrix verify that DMP3007SPSQ-13 is sourced from the original manufacturer or authorized distributors?
All DMP3007SPSQ-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP3007SPSQ-13 meets industry standards.
7.What is the process for return or replacement of DMP3007SPSQ-13?
All DMP3007SPSQ-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMP3007SPSQ-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP3007SPSQ-13 part is unused and in its original packaging.
Return procedure for DMP3007SPSQ-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP3007SPSQ-13 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
