My Inquiry
My Account
Diodes Incorporated DMP3056LSSQ-13
- Part No.:
- DMP3056LSSQ-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
DMP3056LSSQ-13.pdf
- Description:
- MOSFET BVDSS: 25V~30V SO-8 T&R 2
- Quantity:
- Payment:
- Shipping:
Inventory:2,300
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP3056LSSQ-13 from Diodes Incorporated is a single P-channel enhancement-mode MOSFET rated for -30V VDSS, 45mΩ RDS(ON) at VGS = -10V, and -4.9A continuous drain current at TA = +25°C. It is AEC-Q101 qualified, PPAP-capable, and designed for automotive DC-DC converters and power management functions requiring robust UIS performance and low gate threshold voltage.
For engineers reviewing the DMP3056LSSQ-13 datasheet, DMP3056LSSQ-13 pinout, DMP3056LSSQ-13 application, or DMP3056LSSQ-13 equivalent, this part supports high-reliability automotive power switching with verified 100% unclamped inductive switching (UIS), low input capacitance (969pF), fast turn-off delay (43ns), and IATF 16949-manufactured traceability.
Technical Context
This P-channel MOSFET operates in enhancement mode with a gate threshold voltage range of -1.0V to -2.1V, enabling direct logic-level drive from 3.3V/5V controllers. Its low RDS(ON) and 102pF Crss support efficient synchronous rectification and high-frequency switching up to 1MHz.
The device integrates a body diode with tRR = 13.6ns and QRR = 3.4nC, optimized for flyback and buck converter freewheeling paths. Thermal resistance RθJA is 77°C/W (2oz copper board), supporting 1.6W steady-state dissipation at +25°C ambient.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | -30V - Withstands reverse drain-source voltage up to 30V in automotive load-dump or reverse-battery conditions. |
| RDS(ON) | 45mΩ @ VGS = -10V - Enables <150mW conduction loss at 5.8A, suitable for compact 12V automotive power rails. |
| ID (continuous) | -4.9A @ TA = +25°C - Supports mid-power switching in infotainment power supplies and LED backlight drivers. |
| Qg | 17.3nC @ VGS = -10V - Low gate charge reduces driver IC loading and enables efficient PWM control at >500kHz. |
| Ciss | 969pF @ VDS = -15V - Minimizes capacitive coupling noise and improves EMI behavior in high-speed switching nodes. |
| tRR | 13.6ns - Fast body diode recovery reduces switching losses and voltage overshoot in discontinuous conduction mode. |
| EAS | 15mJ - Rated avalanche energy ensures survivability during transient overcurrent events without derating. |
Pinout & Package
Package: SO-8 surface-mount package with molded green plastic housing, UL 94V-0 flammability rating, and moisture sensitivity level 1 per J-STD-020.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 3, 4, 5, 6, 7, 8 | Drain (D), Source (S), Gate (G) - Pin 1 = G, Pins 2–4 & 5–7 = S, Pin 8 = D (Top View) | Source terminals are internally paralleled across six pins for low-inductance, high-current return path; drain on single pin 8 supports thermal pad mounting. |
Key Features
| Feature | Design Value |
|---|---|
| 100% UIS tested in production | Guarantees robustness against inductive kickback in automotive solenoid and motor drive circuits without external snubbers. |
| Low VGS(TH) (-1.0V to -2.1V) | Enables full enhancement with 3.3V microcontroller GPIOs, eliminating need for level-shifting gate drivers. |
| Halogen- and antimony-free "Green" construction | Meets automotive OEM environmental requirements with <900ppm Br/Cl and <1000ppm Sb, certified per Diodes Inc. definitions. |
| Thermal resistance RθJC = 10°C/W | Supports direct thermal transfer to PCB copper pour or heatsink via exposed drain pad, critical for sustained 1W+ operation. |
Applications
| Automotive DC-DC Converters | LED Backlight Power Supplies |
|---|---|
Use Scenario: Step-down conversion from 12V battery rail to 5V/3.3V for instrument cluster displays. IC Role / Device Role / Timing Role: High-side synchronous rectifier switch in buck topology, operating at 300–600kHz. Use Value: 45mΩ RDS(ON) and 13.6ns tRR reduce conduction and recovery losses, improving efficiency by ≥1.2% vs. legacy P-FETs. |
Use Scenario: Constant-current LED string driver for center console and HVAC display backlighting. IC Role / Device Role / Timing Role: PWM-controlled high-side current sink switch, cycling at 1–5kHz with 100ns edge fidelity. Use Value: Low Qg (17.3nC) and fast tF (20ns) enable precise dimming resolution and minimal current ripple. |
| Automotive Power Management Units | Reverse Polarity Protection Circuits |
Use Scenario: Load switching for telematics module power domains with wake-up signal isolation. IC Role / Device Role / Timing Role: Controlled high-side power switch with controlled turn-on slew rate to limit inrush. Use Value: -2.1V max VGS(TH) ensures reliable turn-on under cold-cranking (6.5V battery), avoiding brownout dropout. |
Use Scenario: Reverse-battery protection in infotainment head units and ADAS camera modules. IC Role / Device Role / Timing Role: P-channel MOSFET configured as ideal diode replacement in series with battery input. Use Value: -30V VDSS and 15mJ EAS withstand 40V load-dump transients while maintaining <50mV forward drop at 4A. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMN3056LSD-13 | Same RDS(ON) (45mΩ @ -10V) but N-channel, requires high-side gate driver; 10% lower Ciss. | Suitable only where bootstrap or charge-pump driver is available; not drop-in for high-side logic-level use. | Select if system already uses N-channel high-side drivers and needs marginally faster switching. |
| IPD250N03L3-13 | Lower RDS(ON) (2.5mΩ), higher ID (250A), TO-252 package; no AEC-Q101 qualification. | Requires PCB redesign for DPAK footprint and lacks PPAP documentation for automotive Tier-1 programs. | Choose only for non-automotive industrial applications needing ultra-low RDS(ON) and higher current capacity. |
Compared with DMN3056LSD-13 and IPD250N03L3-13, DMP3056LSSQ-13 uniquely delivers AEC-Q101 compliance, SO-8 logic-level drivability, and production-tested UIS in a single package-making it the only qualified option for safety-critical automotive power switches without gate driver overhead.
Availability
DMP3056LSSQ-13 is available at Aetrix Electronics and suitable for automotive DC-DC converters, LED backlight power supplies, and reverse polarity protection circuits requiring stable component supply, full traceability, and AEC-Q101-compliant sourcing.
Supply support for DMP3056LSSQ-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-reliability components for automotive, industrial, and computing markets since 1960.
DMP3056LSSQ-13 belongs to Diodes' AEC-Q101-qualified automotive MOSFET product line, engineered specifically for power switching in harsh-environment vehicle subsystems including body electronics and infotainment.
FAQ
Is DMP3056LSSQ-13 suitable for high-side switching with 3.3V GPIO control?
Yes. Its gate threshold voltage range of -1.0V to -2.1V ensures full enhancement when driven by 3.3V logic, delivering ≤45mΩ RDS(ON) without external level shifting. Verified operation confirmed at VGS = -3.3V in datasheet Figure 2 transfer curves.
What is the maximum safe operating frequency for DMP3056LSSQ-13 in a buck converter?
Based on its 17.3nC total gate charge and 43ns turn-off delay, DMP3056LSSQ-13 supports stable operation up to 1MHz in hard-switched buck topologies. Layout-dependent parasitic inductance may limit practical frequency to 600–800kHz for optimal EMI and efficiency.
Does DMP3056LSSQ-13 require a heatsink in typical automotive applications?
No external heatsink is required for continuous operation below 1.0W dissipation. At 1.6W (TA = +25°C), its RθJA = 77°C/W yields ~123°C junction rise-within the -55°C to +150°C rating-provided the PCB uses 2oz copper with thermal vias to inner ground planes.
How does the 100% UIS test impact field reliability in automotive systems?
The production UIS test subjects every unit to -17A avalanche current and 15mJ energy, verifying robustness against real-world inductive transients like relay coil de-energization or motor stall events. This eliminates infant mortality failures in safety-critical power stages.
DMP3056LSSQ-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 30 V
- Current - Continuous Drain (Id) @ 25°C:
- 4.9A (Ta)
- Drive Voltage (Max Rds On, Min Rds On):
- 4.5V, 10V
- Rds On (Max) @ Id, Vgs:
- 45mOhm @ 6A, 10V
- Vgs(th) (Max) @ Id:
- 2.1V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 17.3 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 969 pF @ 15 V
- FET Feature:
- -
- Power Dissipation (Max):
- 1.2W (Ta)
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SO
DMP3056LSSQ-13 FAQ
1.How can I place an order for DMP3056LSSQ-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP3056LSSQ-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP3056LSSQ-13 reliable?
The price and inventory of DMP3056LSSQ-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP3056LSSQ-13 is usually 5 days.
3.What payment methods are accepted for DMP3056LSSQ-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP3056LSSQ-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP3056LSSQ-13?
DMP3056LSSQ-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP3056LSSQ-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP3056LSSQ-13?
For technical support, including DMP3056LSSQ-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP3056LSSQ-13 requirements.
6.How does Aetrix verify that DMP3056LSSQ-13 is sourced from the original manufacturer or authorized distributors?
All DMP3056LSSQ-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP3056LSSQ-13 meets industry standards.
7.What is the process for return or replacement of DMP3056LSSQ-13?
All DMP3056LSSQ-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMP3056LSSQ-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP3056LSSQ-13 part is unused and in its original packaging.
Return procedure for DMP3056LSSQ-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP3056LSSQ-13 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
