My Inquiry
My Account
Diodes Incorporated DMP4009SPSW-13
- Part No.:
- DMP4009SPSW-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- 8-PowerTDFN
- Datasheet:
-
DMP4009SPSW-13.pdf
- Description:
- MOSFET BVDSS: 31V~40V POWERDI506
- Quantity:
- Payment:
- Shipping:
Inventory:5,370
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP4009SPSW from Diodes Incorporated is a 40V P-channel enhancement-mode MOSFET in PowerDI5060-8/SWP (Type UX) package, rated for -79A continuous drain current at TC = +25°C, with RDS(ON) of 11 mΩ @ VGS = -10V and 19 mΩ @ VGS = -4.5V. It delivers low on-resistance and fast switching for high-efficiency DC-DC converters and power-management functions.
For engineers reviewing the DMP4009SPSW datasheet, DMP4009SPSW pinout, DMP4009SPSW application, or DMP4009SPSW equivalent, key selection criteria include its -40V VDSS, wettable flank package for optical inspection, AEC-Q101 readiness, and thermal resistance RθJC of 1.05°C/W for high-power-density board designs.
Technical Context
This MOSFET employs trench-gate technology to achieve low RDS(ON) while maintaining robust switching performance, with Qg of 112 nC at VGS = -10V and 53 nC at VGS = -4.5V. Its body diode exhibits VSD = -0.67 V (typ) at IS = -1 A and tRR = 27 ns under defined di/dt conditions.
The device features 100% production-tested unclamped inductive switching (UIS) capability up to IAS = -28.1 A and EAS = 394.9 mJ, and operates across -55°C to +150°C junction temperature range with normalized RDS(ON) variation ≤2.2× over full temperature range.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | -40 V - Maximum drain-source blocking voltage for high-side switch or load switch applications |
| RDS(ON) | 11 mΩ @ VGS = -10V - Enables <1.0 W conduction loss at 9.8 A, critical for thermally constrained PCB layouts |
| ID (TC = +25°C) | -79 A - Continuous current rating referenced to case temperature, supporting high-current synchronous rectification |
| Qg | 112 nC @ VGS = -10V - Gate charge value directly impacts driver sizing and switching loss in PWM circuits |
| RθJC | 1.05 °C/W - Low junction-to-case thermal resistance enables direct heatsinking via exposed drain pad |
| tRR | 27 ns - Fast body diode recovery reduces shoot-through risk and improves efficiency in buck/flyback topologies |
| Ciss | 5697 pF - Input capacitance determines gate drive loop stability and Miller effect sensitivity |
Pinout & Package
Package: PowerDI5060-8/SWP (Type UX), surface-mount, thermally enhanced with exposed drain pad and wettable flank terminals for automated optical inspection (AOI).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (Marked) | Source | Primary current return path; tied to ground or low-side reference in high-side switch configurations |
| Pins 2–5, 7–8 | Drain | Commonly paralleled drain terminals connected to exposed copper pad - primary heat dissipation path and high-current output node |
| Pin 6 | Gate | Control input requiring negative VGS; sensitive to ESD and requires proper gate resistor for dV/dt control |
| Pin 7 (Exposed Pad) | Drain (Thermal) | Electrically and thermally identical to drain pins - must be soldered to large copper pour for thermal management |
Key Features
| Feature | Design Value |
|---|---|
| Wettable Flank Terminals | Enables 100% AOI coverage of solder joints without X-ray, reducing post-reflow defect escape in automotive and industrial assembly |
| 100% UIS Tested | Guarantees ruggedness against inductive load transients up to 394.9 mJ, eliminating need for external snubbers in solenoid/relay drivers |
| Low RDS(ON) @ VGS = -4.5V | 19 mΩ enables direct compatibility with 5 V logic-level gate drivers, simplifying power stage design in USB-C PD and PMIC applications |
| Halogen & Antimony Free | Meets "Green" definition (<900 ppm Br, <900 ppm Cl, <1000 ppm Sb), satisfying strict environmental compliance for global OEMs |
| Moisture Sensitivity Level 1 | Eliminates bake requirements prior to reflow, reducing manufacturing cost and cycle time for high-volume SMT lines |
Applications
| High-Efficiency Buck Converters | Hot-Swap Controllers |
|---|---|
Use Scenario: 12 V to 3.3 V/5 V point-of-load conversion in telecom baseband cards with >95% peak efficiency requirement. IC Role / Device Role / Timing Role: Synchronous high-side P-channel MOSFET providing low-loss switching with minimal dead-time penalty. Use Value: 11 mΩ RDS(ON) reduces conduction loss by 38% vs. comparable 17 mΩ devices, enabling 5°C lower junction temperature at 20 A load. | Use Scenario: Inrush current limiting and fault protection in 48 V server backplane slots with hot-plug capability. IC Role / Device Role / Timing Role: Load switch controlling power delivery to add-in modules during insertion/removal sequences. Use Value: -79 A rating and 100% UIS testing ensure reliable operation during repeated 50 A surge events without degradation. |
| Automotive Body Control Modules | USB-C Power Delivery Switches |
Use Scenario: Headlight dimming and seat motor control in AEC-Q101-compliant BCMs operating at ambient up to 105°C. IC Role / Device Role / Timing Role: High-side switch driving resistive/inductive loads with integrated reverse-polarity protection. Use Value: -55°C to +150°C operating range and 1.05°C/W RθJC support stable performance without derating in sealed enclosures. | Use Scenario: Dual-role port power path control in portable monitors and docking stations supporting 100 W PD 3.0. IC Role / Device Role / Timing Role: Bidirectional load switch managing VBUS routing between source and sink with fast turn-off. Use Value: 27 ns tRR and 408 pF Crss minimize cross-conduction risk during role swap transitions, preventing bus collapse. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMT4009LPS-13 | Same RDS(ON) (11 mΩ @ -10 V) but in PowerDI3333 package; RθJA = 50°C/W vs. 32°C/W for DMP4009SPSW | Limited to ≤40 A continuous due to higher thermal resistance; unsuitable for >60 W power stages | Select when board space is constrained and power dissipation remains below 2.5 W |
| IPD400P04P4L-11 | Higher RDS(ON) (15 mΩ @ -10 V); TO-252 package with RθJC = 2.5°C/W but no wettable flanks | Requires X-ray inspection; not qualified for automotive AOI processes | Select only if legacy TO-252 footprint must be retained and AOI is not required |
Compared with DMT4009LPS-13 and IPD400P04P4L-11, DMP4009SPSW uniquely combines ultra-low RθJC, wettable flanks, and AEC-Q101 readiness-making it the only choice for thermally dense, automotive-grade, AOI-enabled high-current P-channel switching.
Availability
DMP4009SPSW is available at Aetrix Electronics and suitable for high-efficiency buck converters, hot-swap controllers, and automotive body control modules requiring stable component supply, long-term lifecycle assurance, and traceable sourcing.
Supply support for DMP4009SPSW includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-reliability power management, signal integrity, and protection solutions for industrial, automotive, and consumer markets.
The PowerDI® MOSFET product line targets high-current, thermally demanding applications where low RDS(ON), robust UIS capability, and advanced packaging (e.g., wettable flanks) are essential for next-generation power systems.
FAQ
What is the maximum safe operating temperature for DMP4009SPSW?
The junction temperature must not exceed +150°C under any operating condition. At TC = +25°C, the device supports 119 W power dissipation; derating is required above 25°C at 1.05°C/W slope. PCB layout with ≥100 mm² exposed drain copper is mandatory to sustain rated current.
Does DMP4009SPSW require a gate driver IC?
A dedicated gate driver is recommended for switching frequencies >100 kHz or when driving multiple parallel devices. The 112 nC total gate charge at -10 V demands ≥1 A peak drive capability to achieve sub-50 ns rise/fall times; 10 Ω gate resistor is typical for EMI-controlled turn-on.
Is DMP4009SPSW qualified for automotive use?
While not pre-qualified to AEC-Q101 in this specific part number, Diodes states that automotive-grade versions are available upon request with PPAP documentation and IATF 16949 manufacturing. Standard DMP4009SPSW shares identical die and PowerDI5060-8/SWP construction used in qualified variants.
How does the wettable flank feature improve manufacturing yield?
Wettable flanks allow side-view optical inspection of all eight solder joints without X-ray, detecting voids, insufficient fillet, or bridging with >99.5% accuracy. This eliminates manual rework and reduces first-pass yield loss by ~12% in high-volume automotive SMT lines per IPC-A-610 Class 3 standards.
DMP4009SPSW-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-PowerTDFN
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 40 V
- Current - Continuous Drain (Id) @ 25°C:
- 79A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 4.5V, 10V
- Rds On (Max) @ Id, Vgs:
- 11mOhm @ 9.8A, 10V
- Vgs(th) (Max) @ Id:
- 2.5V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 112 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 5697 pF @ 20 V
- FET Feature:
- -
- Power Dissipation (Max):
- 3.9W (Ta), 119W (Tc)
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount, Wettable Flank
- Supplier Device Package:
- PowerDI5060-8 (Type UX)
DMP4009SPSW-13 FAQ
1.How can I place an order for DMP4009SPSW-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP4009SPSW-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP4009SPSW-13 reliable?
The price and inventory of DMP4009SPSW-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP4009SPSW-13 is usually 5 days.
3.What payment methods are accepted for DMP4009SPSW-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP4009SPSW-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP4009SPSW-13?
DMP4009SPSW-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP4009SPSW-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP4009SPSW-13?
For technical support, including DMP4009SPSW-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP4009SPSW-13 requirements.
6.How does Aetrix verify that DMP4009SPSW-13 is sourced from the original manufacturer or authorized distributors?
All DMP4009SPSW-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP4009SPSW-13 meets industry standards.
7.What is the process for return or replacement of DMP4009SPSW-13?
All DMP4009SPSW-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMP4009SPSW-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP4009SPSW-13 part is unused and in its original packaging.
Return procedure for DMP4009SPSW-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP4009SPSW-13 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
