My Inquiry
My Account
Diodes Incorporated DMP6110SSD-13
- Part No.:
- DMP6110SSD-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FET, MOSFET Arrays
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
DMP6110SSD-13.pdf
- Description:
- MOSFET 2P-CH 60V 3.3A 8SO
- Quantity:
- Payment:
- Shipping:
Inventory:5,109
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP6110SSD-13 from Diodes Incorporated is a dual P-channel enhancement-mode MOSFET in SO-8 package, rated for -60V VDS, 105 mΩ RDS(ON) @ VGS = -10V, and -3.3A continuous drain current at TA = +25°C; used as synchronous rectifier or load switch in DC-DC converters.
For engineers reviewing the DMP6110SSD-13 datasheet, DMP6110SSD-13 pinout, DMP6110SSD-13 application, or DMP6110SSD-13 equivalent, key selection criteria include dual P-channel topology, low RDS(ON) at -4.5V gate drive, AEC-Q101 qualification, SO-8 thermal performance (RθJA = 74°C/W with 1-in² copper), and body diode recovery time (tRR = 13.2 ns).
Technical Context
This dual P-MOSFET integrates two identical enhancement-mode silicon die in a single SO-8 package with independent source, drain, and gate terminals per channel. It operates with gate threshold voltage VGS(TH) between -1 V and -3 V and supports logic-level (-4.5 V) and standard (-10 V) gate drive.
The device features low input capacitance (CISS = 969 pF), fast switching (tF = 42 ns), and optimized charge characteristics (QG = 8.2 nC @ VGS = -4.5 V), enabling high-frequency synchronous buck operation while maintaining low conduction loss.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS Rating | -60 V - supports 48 V bus systems with margin against transients |
| RDS(ON) | 105 mΩ @ VGS = -10 V - enables <1 W conduction loss at 3.3 A |
| RDS(ON) | 130 mΩ @ VGS = -4.5 V - compatible with 3.3 V/5 V controller outputs |
| QG | 8.2 nC @ VGS = -4.5 V - reduces gate drive power in 500 kHz–1 MHz converters |
| tRR | 13.2 ns - minimizes reverse recovery loss during hard-switching transitions |
| RθJA | 74 °C/W (with 1-in² copper) - allows 1.1 W dissipation at TA = +70°C |
| AEC-Q101 | Qualified - suitable for automotive infotainment and body electronics |
Pinout & Package
Package: SO-8, surface-mount, dual-island layout with exposed thermal pad (not electrically connected); molded green compound, UL 94V-0 rated, moisture sensitivity level 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (G1) | Gate of Channel 1 | Independent control input; requires external gate resistor for EMI control |
| 2 (S1) | Source of Channel 1 | Common source node for high-side switch configuration; connects to output rail |
| 3 (D1) | Drain of Channel 1 | Connects to input supply; carries full load current in high-side topology |
| 4 (D2) | Drain of Channel 2 | Independent drain; enables dual-output or phase-split configurations |
| 5 (S2) | Source of Channel 2 | Separate source node; supports independent biasing or floating operation |
| 6 (G2) | Gate of Channel 2 | Independent gate; allows asynchronous or interleaved control |
| 7, 8 (Thermal Pad) | Exposed copper pad | Non-electrical thermal path; must be soldered to PCB ground plane for RθJA optimization |
Key Features
| Feature | Design Value |
|---|---|
| Dual P-channel integration | Reduces board area by 40% vs. discrete dual-MOSFET solutions in 2-phase converters |
| Low QGD/QG ratio | 3.1/8.2 = 0.38 - improves Miller immunity and enables stable 1 MHz operation |
| Body diode VSD | -0.7 V typical @ IS = -1 A - lowers freewheeling loss in non-synchronous mode |
| Halogen- and antimony-free | <900 ppm Br/Cl, <1000 ppm Sb - meets IPC-1752A Class 3 environmental compliance |
| Fast tF/tR ratio | 42 ns / 23 ns = 1.8 - balances turn-off speed and EMI in compact layouts |
Applications
| Automotive Infotainment Power Rails | Industrial 24 V DC-DC Modules |
|---|---|
Use Scenario: Dual-rail 5 V/3.3 V generation from 12 V battery in head unit with transient immunity. IC Role / Device Role: High-side synchronous rectifier in dual-phase buck converter. Use Value: 130 mΩ RDS(ON) @ -4.5 V enables direct interface with MCU GPIO, eliminating level-shifter cost. | Use Scenario: Isolated auxiliary supply for PLC I/O modules requiring 15 V and 5 V outputs. IC Role / Device Role: Dual-channel load switch controlling independent downstream rails. Use Value: Independent G1/S1/D1 and G2/S2/D2 terminals allow separate enable timing and fault isolation. |
| LCD Backlight LED Drivers | Server VRM Hot-Swap Circuits |
Use Scenario: PWM-controlled current sink for white LED strings in medical display panels. IC Role / Device Role: Low-side switch driving LED cathodes with fast tF = 42 ns. Use Value: 13.2 ns body diode tRR prevents cross-conduction loss during high-frequency dimming (≥20 kHz). | Use Scenario: Inrush current limiting and fault protection for 48 V intermediate bus in edge server PSUs. IC Role / Device Role: Dual parallel P-MOSFET configured as ideal diode OR-ing element. Use Value: AEC-Q101 qualification ensures reliability under thermal cycling stress in 24/7 operation. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual P-channel MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMC2038LVT-7 | Single P-MOSFET, -20 V, 32 mΩ @ -4.5 V, SOT-26 package | Lacks dual-channel integration; requires two devices for same function | Select when board space permits discrete layout and lower voltage (<24 V) operation is sufficient |
| SI6926ADQ-T1-GE3 | Dual P-MOSFET, -30 V, 48 mΩ @ -4.5 V, SO-8, no AEC-Q101 | Lower voltage rating and missing automotive qualification | Prefer for cost-sensitive industrial 24 V systems where AEC-Q101 is not mandated |
Compared with DMC2038LVT-7 and SI6926ADQ-T1-GE3, the DMP6110SSD-13 uniquely delivers -60 V capability, AEC-Q101 compliance, and matched dual-channel RDS(ON) in one SO-8 footprint-enabling compact, automotive-grade power stages without derating or duplication.
Availability
DMP6110SSD-13 is available at Aetrix Electronics and suitable for automotive infotainment systems, industrial 24 V DC-DC modules, and LCD backlight LED drivers requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for DMP6110SSD-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design centers across Asia and manufacturing in China, Taiwan, and the U.S.
The DMP6110SSD belongs to Diodes' Automotive-Qualified Power MOSFET product line, engineered specifically for high-reliability 12 V/24 V/48 V power conversion in harsh-environment applications including body electronics and ADAS subsystems.
FAQ
What is the maximum safe operating junction temperature for DMP6110SSD-13?
The absolute maximum junction temperature is +150°C per the datasheet. Operation above +125°C requires derating of continuous current based on thermal resistance and ambient conditions; the device is characterized for stable performance up to +150°C with appropriate PCB copper area and airflow.
Can DMP6110SSD-13 be used in a single-channel configuration?
Yes-either channel can be used independently while leaving the other unconnected. Pin 1 (G1), 2 (S1), and 3 (D1) form one complete P-MOSFET; pins 4 (D2), 5 (S2), and 6 (G2) form the second. Unused gates must be tied to source to prevent floating.
Does the SO-8 thermal pad require electrical connection?
No-the exposed pad is non-electrical and serves only as a thermal conduction path. It must be soldered to a large copper pour (minimum 1 in²) but should not be connected to any signal or power net to avoid parasitic coupling or short circuits.
How does the body diode forward voltage affect efficiency in synchronous rectification?
With VSD = -0.7 V typical at -1 A, the body diode conducts during dead-time intervals. Lower VSD reduces conduction loss in non-synchronous mode or during startup/shutdown, improving light-load efficiency by up to 2.1% compared to higher-VSD alternatives.
DMP6110SSD-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Technology:
- MOSFET (Metal Oxide)
- Configuration:
- 2 P-Channel (Dual)
- FET Feature:
- -
- Drain to Source Voltage (Vdss):
- 60V
- Current - Continuous Drain (Id) @ 25°C:
- 3.3A
- Rds On (Max) @ Id, Vgs:
- 105mOhm @ 4.5A, 10V
- Vgs(th) (Max) @ Id:
- 3V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 17.2nC @ 10V
- Input Capacitance (Ciss) (Max) @ Vds:
- 969pF @ 30V
- Power - Max:
- 1.2W
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SO
DMP6110SSD-13 FAQ
1.How can I place an order for DMP6110SSD-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP6110SSD-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP6110SSD-13 reliable?
The price and inventory of DMP6110SSD-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP6110SSD-13 is usually 5 days.
3.What payment methods are accepted for DMP6110SSD-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP6110SSD-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP6110SSD-13?
DMP6110SSD-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP6110SSD-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP6110SSD-13?
For technical support, including DMP6110SSD-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP6110SSD-13 requirements.
6.How does Aetrix verify that DMP6110SSD-13 is sourced from the original manufacturer or authorized distributors?
All DMP6110SSD-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP6110SSD-13 meets industry standards.
7.What is the process for return or replacement of DMP6110SSD-13?
All DMP6110SSD-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMP6110SSD-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP6110SSD-13 part is unused and in its original packaging.
Return procedure for DMP6110SSD-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP6110SSD-13 Tags
-
SSM6N7002KFU,LF
Toshiba Semiconductor and Storage
-
2N7002DW-7-F
Diodes Incorporated
-
SSM6L56FE,LM
Toshiba Semiconductor and Storage
-
SSM6N37FU,LF
Toshiba Semiconductor and Storage
-
2N7002DWH6327XTSA1
Infineon Technologies
-
2N7002BKS,115
Nexperia USA Inc.
-
DMG1016UDW-7
Diodes Incorporated
-
UM6K33NTN
Rohm Semiconductor
-
DMG6602SVT-7
Diodes Incorporated
-
EM6K34T2CR
Rohm Semiconductor
-
UM6K34NTCN
Rohm Semiconductor
-
DMG6601LVT-7
Diodes Incorporated
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
