My Inquiry
My Account
Diodes Incorporated DMP6110SVT-13
- Part No.:
- DMP6110SVT-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- SOT-23-6 Thin, TSOT-23-6
- Datasheet:
-
DMP6110SVT-13.pdf
- Description:
- MOSFET P-CH 60V 7.3A TSOT26
- Quantity:
- Payment:
- Shipping:
Inventory:2,594
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMP6110SVT-13 from Diodes Incorporated is a P-channel enhancement-mode MOSFET in TSOT26 package, rated for -60V VDS, 105 mΩ RDS(ON) at VGS = -10V, and -7.3A continuous drain current at TC = +25°C. It serves as a high-efficiency synchronous rectifier or load switch in low-voltage DC-DC converters.
For engineers reviewing the DMP6110SVT-13 datasheet, DMP6110SVT-13 pinout, DMP6110SVT-13 application, or DMP6110SVT-13 equivalent, key selection criteria include gate threshold voltage (-1 to -3 V), body diode forward voltage (-0.7 to -1.2 V), thermal resistance (RθJA = 69 °C/W with copper pad), and AEC-Q101 qualification for automotive-grade reliability.
Technical Context
This device operates in enhancement mode with negative gate control logic, requiring VGS ≤ -1 V to initiate conduction and full turn-on at VGS = -10 V. Its low RDS(ON) and fast switching (tr = 23 ns, tf = 42 ns) enable high-frequency operation in buck converter topologies.
The integrated body diode supports reverse recovery (tRR = 13.2 ns, QRR = 6.18 nC) and exhibits temperature-stable on-resistance-normalized RDS(ON) varies less than 2× from -55°C to +150°C at fixed VGS.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS Rating | -60 V - Supports input rails up to 48 V nominal systems with margin for transients |
| RDS(ON) | 105 mΩ @ VGS = -10 V - Enables <1.1 W conduction loss at 3.3 A in 12 V bus applications |
| ID Continuous | -7.3 A @ TC = +25°C - Sustains full load in compact 2.9 × 2.8 mm footprint without forced cooling |
| Qg | 17.2 nC @ VGS = -10 V - Matches standard gate drivers with ≤1 Ω source impedance for clean 10–500 kHz switching |
| tr/tf | 23 ns / 42 ns - Minimizes switching losses in 300–1000 kHz DC-DC stages |
| TJ Range | -55°C to +150°C - Qualified per AEC-Q101 for under-hood automotive power modules |
Pinout & Package
Package: TSOT26 - 6-pin, surface-mount, lead-free, green molding compound (UL 94V-0), 0.008 g weight, moisture sensitivity level 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (S) | Source | Main current return path; tied to ground or low-side reference in high-side switch configurations |
| 2 (G) | Gate | Control terminal; requires negative bias relative to source to conduct; driven by dedicated level-shifting circuitry |
| 3 (D) | Drain | High-side power input node; connects to input rail in load-switch or synchronous rectifier roles |
| 4 (D) | Drain | Parallel drain connection; electrically identical to Pin 3, improves current sharing and thermal spreading |
| 5 (D) | Drain | Parallel drain connection; same function as Pins 3 and 4, enhances power handling in compact layout |
| 6 (S) | Source | Secondary source terminal; bonded to same internal node as Pin 1, reduces source inductance in high-dI/dt switching |
Key Features
| Feature | Design Value |
|---|---|
| Low RDS(ON) at -4.5 V | 130 mΩ - Enables 3.3 V logic-level gate drive in battery-powered systems without level shifters |
| Fast body diode recovery | tRR = 13.2 ns - Reduces shoot-through risk and EMI in synchronous buck converters |
| AEC-Q101 qualified | Stress-tested per automotive reliability standards - Validated for engine control, ADAS, and infotainment power rails |
| Green compound & RoHS | Halogen- and antimony-free (<900 ppm Br/Cl, <1000 ppm Sb) - Complies with EU ELV and JGPSSI directives |
Applications
| Automotive LED Headlamp Driver | Industrial 24 V DC-DC Converter |
|---|---|
Use Scenario: High-side current control for adaptive front-lighting systems with PWM dimming up to 2 kHz. IC Role / Device Role / Timing Role: P-channel high-side switch managing 5 A peak load; replaces mechanical relay with µs-scale response. Use Value: Eliminates contact wear and bounce; enables precise current regulation via gate voltage scaling across temperature. | Use Scenario: Synchronous rectification stage in isolated 24 V → 5 V/3 A flyback converter for PLC I/O modules. IC Role / Device Role / Timing Role: Low-loss freewheeling path during secondary-side conduction; commutates with primary-side MOSFET timing. Use Value: Improves efficiency by 2.1% over Schottky diode solution at full load; reduces thermal footprint by 35%. |
| USB-C Power Delivery Load Switch | Medical Portable Infusion Pump Motor Driver |
Use Scenario: Input protection and inrush limiting for 20 V PD sink ports compliant with USB-IF v2.0. IC Role / Device Role / Timing Role: Reverse-polarity and overcurrent protected high-side switch; controlled via microcontroller GPIO. Use Value: Achieves <100 µs fault response using integrated current-sense capability and fast gate turn-off. | Use Scenario: H-bridge half-bridge leg driving 12 V brushed DC motor in battery-operated infusion pumps. IC Role / Device Role / Timing Role: Low-RDS(ON) high-side switch enabling bidirectional motor control with minimal voltage drop. Use Value: Maintains ±0.5% flow rate accuracy over battery discharge (10.8–13.2 V) due to stable on-resistance vs. temperature. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMG6110UVQ-7 | Same RDS(ON) (105 mΩ @ -10 V) but in U-WLB1515-6 package; 30% smaller footprint (1.5 × 1.5 mm) | Preferred for ultra-compact portable designs where board area is constrained below 4 mm² | Select when space savings outweigh thermal derating trade-off (RθJA = 125 °C/W vs. 69 °C/W) |
| SI2305DS-T1-GE3 | Higher RDS(ON) (150 mΩ @ -4.5 V); lower VDS rating (-30 V); no AEC-Q101 qualification | Suitable for consumer-grade 5–12 V power rails only; not recommended for automotive or industrial environments | Choose only for cost-sensitive non-automotive applications with <30 V max system voltage |
Compared with DMG6110UVQ-7 and SI2305DS-T1-GE3, DMP6110SVT-13 delivers superior thermal performance in automotive-grade packaging while maintaining identical electrical specs at -10 V drive-making it optimal for thermally demanding, safety-critical 48 V systems.
Availability
DMP6110SVT-13 is available at Aetrix Electronics and suitable for automotive lighting control, industrial DC-DC conversion, and medical portable power management requiring stable component supply and long-term lifecycle support.
Supply support for DMP6110SVT-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design centers across Asia and manufacturing in China, Taiwan, and the US.
The DMP6110SVT belongs to Diodes' Automotive-Qualified Power MOSFET product line, engineered specifically for high-reliability 12–48 V power distribution in engine control, ADAS, and body electronics.
FAQ
What is the maximum safe operating junction temperature for DMP6110SVT-13?
The absolute maximum junction temperature is +150°C, validated per AEC-Q101 stress testing. Operation above +125°C requires derating of continuous current per Figure 5 and Figure 7 in DS37594 Rev. 2–2; at +150°C, RDS(ON) increases to ~140 mΩ at VGS = -10 V, limiting usable ID to approximately 4.2 A with adequate PCB copper area.
Can DMP6110SVT-13 be used in a high-side switch configuration with 3.3 V logic control?
Yes, but only with external level shifting: its VGS(TH) range (-1 to -3 V) means 3.3 V logic cannot directly drive it in high-side mode. A charge pump or dual-supply gate driver (e.g., TC4427) is required to generate ≥-4.5 V gate voltage relative to source for reliable 6.5 A conduction at RDS(ON) = 130 mΩ.
Does DMP6110SVT-13 have integrated ESD protection on the gate?
No-its gate oxide is rated for ±20 V VGS maximum, with no built-in ESD clamp. External TVS diodes (e.g., DZ23C5V1) or series gate resistors (≥10 Ω) are required in production designs to prevent damage during handling or board-level transients per IEC 61000-4-2 Level 3 (8 kV contact).
How does the TSOT26 package affect thermal performance compared to SO-8?
TSOT26 has higher thermal resistance: RθJA = 69 °C/W (with 1-inch² copper) versus ~50 °C/W for SO-8. However, its 2.9 × 2.8 mm size allows tighter layout and better heat spreading across multiple layers. For >5 A operation, use ≥2 oz copper, thermal vias under drain pads, and avoid placing near heat sources to maintain TJ < 125°C.
DMP6110SVT-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- SOT-23-6 Thin, TSOT-23-6
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 60 V
- Current - Continuous Drain (Id) @ 25°C:
- 7.3A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 4.5V, 10V
- Rds On (Max) @ Id, Vgs:
- 105mOhm @ 4.5A, 10V
- Vgs(th) (Max) @ Id:
- 3V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 17.2 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 969 pF @ 30 V
- FET Feature:
- -
- Power Dissipation (Max):
- 1.2W (Ta)
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TSOT-23-6
DMP6110SVT-13 FAQ
1.How can I place an order for DMP6110SVT-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMP6110SVT-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMP6110SVT-13 reliable?
The price and inventory of DMP6110SVT-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMP6110SVT-13 is usually 5 days.
3.What payment methods are accepted for DMP6110SVT-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMP6110SVT-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMP6110SVT-13?
DMP6110SVT-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMP6110SVT-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMP6110SVT-13?
For technical support, including DMP6110SVT-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMP6110SVT-13 requirements.
6.How does Aetrix verify that DMP6110SVT-13 is sourced from the original manufacturer or authorized distributors?
All DMP6110SVT-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMP6110SVT-13 meets industry standards.
7.What is the process for return or replacement of DMP6110SVT-13?
All DMP6110SVT-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMP6110SVT-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMP6110SVT-13 part is unused and in its original packaging.
Return procedure for DMP6110SVT-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMP6110SVT-13 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
