My Inquiry
My Account
Diodes Incorporated DMTH45M5SPSWQ-13
- Part No.:
- DMTH45M5SPSWQ-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- 8-PowerTDFN
- Datasheet:
-
DMTH45M5SPSWQ-13.pdf
- Description:
- MOSFET BVDSS: 31V~40V POWERDI506
- Quantity:
- Payment:
- Shipping:
Inventory:4,193
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMTH45M5SPSWQ from Diodes Incorporated is an AEC-Q101-qualified N-channel enhancement-mode MOSFET in PowerDI5060-8/SWP package, rated for 40V VDSS, 5.5mΩ RDS(ON) @ 10V VGS, and 86A ID at TC = +25°C. It operates up to +175°C junction temperature and supports high-frequency switching in automotive DC-DC converters.
For engineers reviewing the DMTH45M5SPSWQ datasheet, DMTH45M5SPSWQ pinout, DMTH45M5SPSWQ application, or DMTH45M5SPSWQ equivalent, this part is selected for synchronous rectification, high-ambient-temperature power stages, and PPAP-capable automotive subsystems requiring robust UIS performance and wettable flank inspection capability.
Technical Context
This MOSFET employs a trench-gate silicon process optimized for low RDS(ON) and fast switching with Ciss = 1083pF and Qg = 13.2nC at VDS = 20V. Its body diode exhibits tRR = 61.3ns and QRR = 52.1nC under 25A/100A/μs conditions.
The device integrates an exposed drain pad for thermal conduction (RθJC = 2.0°C/W), supports ±20V gate drive, and delivers stable RDS(ON) across -55°C to +175°C with normalized drift ≤1.8× at max TJ.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | 40V - Maximum blocking voltage before avalanche onset; defines safe operation in 24V automotive systems with transients. |
| RDS(ON) | 5.5mΩ @ 10V - Confirmed on-resistance at standard gate drive; enables <1.4W conduction loss at 25A. |
| ID (TC = 25°C) | 86A - Continuous drain current rating at case temperature 25°C; sets thermal design baseline for heatsink sizing. |
| Qg | 13.2nC - Total gate charge required for full turn-on; determines driver strength requirement and switching loss trade-off. |
| tRR | 61.3ns - Body diode reverse-recovery time; critical for synchronous rectifier efficiency and EMI control in hard-switched topologies. |
| TJ Max | +175°C - Maximum junction temperature rating; allows operation in engine bay or powertrain modules without derating. |
| EAS | 20.6mJ - Single-pulse avalanche energy rating; validates ruggedness against inductive switching stress in motor drives. |
Pinout & Package
Package: PowerDI5060-8/SWP (Type UX), surface-mount, thermally enhanced with exposed drain pad and wettable flanks for automated optical inspection.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Source | Low-side return path; electrically tied to three internal source terminals for reduced parasitic inductance. |
| 2 | Drain | Main power output node; connected to large-area exposed copper pad for thermal dissipation and current handling. |
| 3 | Source | Redundant source connection; improves current sharing and reduces bond wire resistance in parallel configurations. |
| 4 | Source | Third source terminal; enhances layout symmetry and minimizes source inductance in high-di/dt applications. |
| 5 | Gate | Control input; requires <13.2nC charge for full enhancement; sensitive to ESD (±20V rating). |
| 6 | Drain | Second drain connection; shares current with Pin 2 and Pin 7–8 to distribute thermal load across package. |
| 7 | Drain | Third drain terminal; contributes to low RθJC (2.0°C/W) via direct thermal path to PCB copper. |
| 8 | Drain | Fourth drain connection; enables high-current routing while maintaining mechanical stability on FR-4 boards. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualification & PPAP support | Validated for automotive production use with documented change control, IATF 16949 manufacturing, and zero defect sampling plans. |
| 100% UIS tested in production | Every unit undergoes unclamped inductive switching stress test (L = 0.1mH, IAS = 20.3A), ensuring field reliability in motor and solenoid drivers. |
| Wettable flank leads | Matte tin-annealed terminals enable automated AOI detection of solder joint integrity-critical for safety-critical automotive assembly lines. |
| +175°C continuous operation | Guaranteed parametric performance up to maximum junction temperature; eliminates need for external thermal derating in under-hood designs. |
| Low Ciss/Coss ratio | Ciss = 1083pF, Coss = 621pF - Enables efficient ZVS/ZCS implementation and reduces Miller-induced shoot-through risk. |
Applications
| Automotive DC-DC Converter | Synchronous Rectifier |
|---|---|
Use Scenario: 12V-to-48V bidirectional converter in mild hybrid vehicles. IC Role / Device Role / Timing Role: High-side switch in buck-boost topology operating at 200–500kHz. Use Value: 5.5mΩ RDS(ON) reduces conduction loss by >35% vs. legacy 8mΩ devices, improving system efficiency from 92% to 94.5% at 30A. |
Use Scenario: Secondary-side rectification in isolated 48V server PSUs. IC Role / Device Role / Timing Role: Synchronous rectifier replacing Schottky diode in forward converter. Use Value: 61.3ns tRR and low QRR minimize reverse recovery losses, cutting diode conduction loss by 62% at 25A/100kHz. |
| Engine Control Unit Power Stage | Electric Power Steering (EPS) Driver |
Use Scenario: Fuel injector driver with inductive load switching. IC Role / Device Role / Timing Role: Low-side switch controlling 12V solenoid with 10ms on-time pulses. Use Value: 20.6mJ EAS withstands repeated inductive kickback without degradation, extending service life beyond 100k cycles. |
Use Scenario: H-bridge motor driver for 3-phase EPS assist motor. IC Role / Device Role / Timing Role: Half-bridge leg switch operating at 10–20kHz PWM frequency. Use Value: +175°C TJ rating ensures uninterrupted torque delivery during sustained hill-climb operation at ambient 125°C. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar N-channel automotive MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STL220N4F7AG | RDS(ON) = 3.7mΩ @ 10V, but VDSS = 40V same; Qg = 19.5nC (48% higher); no wettable flank. | Higher gate drive demand increases controller complexity; unsuitable for AOI-dependent automotive lines. | Select only if lowest possible conduction loss is prioritized over manufacturability and switching loss. |
| IXTP44N10P | TO-220 package; RDS(ON) = 22mΩ @ 10V; TJ max = +175°C; no AEC-Q101 qualification. | Requires manual soldering and thermal interface material; not PPAP-ready for Tier 1 OEMs. | Acceptable for non-safety-critical industrial prototypes, but not for production automotive ECUs. |
Compared with STL220N4F7AG and IXTP44N10P, DMTH45M5SPSWQ uniquely balances ultra-low RDS(ON), AEC-Q101 compliance, wettable flank inspection, and integrated thermal performance-making it the only choice for volume automotive power stages where manufacturability, reliability, and efficiency are jointly constrained.
Availability
DMTH45M5SPSWQ is available at Aetrix Electronics and suitable for automotive DC-DC converters, engine control units, and electric power steering systems requiring stable component supply and full PPAP documentation support.
Supply support for DMTH45M5SPSWQ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with ISO/TS 16949-certified wafer fabs and assembly facilities.
This MOSFET belongs to Diodes' Automotive Power Solutions product line, engineered specifically for high-reliability, high-temperature automotive power conversion and motor control applications.
FAQ
What is the maximum gate-source voltage rating for DMTH45M5SPSWQ?
The absolute maximum gate-source voltage is ±20V, per the datasheet's "Maximum Ratings" table. Exceeding this value risks permanent gate oxide damage. Recommended gate drive is 10V for full enhancement, with 4.5V minimum for guaranteed turn-on at elevated temperatures.
Does DMTH45M5SPSWQ require a gate resistor for safe operation?
Yes-a series gate resistor (typically 3.5Ω, as used in the datasheet's switching time test conditions) is required to control dV/dt, limit peak gate current, and prevent oscillation. Without it, ringing and unintended turn-on due to Miller effect may occur, especially at high di/dt.
Can DMTH45M5SPSWQ be used in parallel configurations?
Yes-the device features multiple source and drain terminals (Pins 1,3,4 and 2,6,7,8) and positive RDS(ON) temperature coefficient, enabling stable current sharing. Layout symmetry and matched gate drive paths are essential to avoid imbalance.
Is the PowerDI5060-8/SWP package lead-free and RoHS compliant?
Yes-DMTH45M5SPSWQ uses matte tin annealed over copper leadframe and green molding compound, meeting EU RoHS 2015/863/EU (RoHS 3) with exemptions applied, and is halogen- and antimony-free per Diodes' definition (<900ppm Br, <900ppm Cl, <1000ppm Sb).
DMTH45M5SPSWQ-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-PowerTDFN
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- N-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 40 V
- Current - Continuous Drain (Id) @ 25°C:
- 86A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 10V
- Rds On (Max) @ Id, Vgs:
- 5.5mOhm @ 25A, 10V
- Vgs(th) (Max) @ Id:
- 3.5V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 13.2 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 1083 pF @ 20 V
- FET Feature:
- -
- Power Dissipation (Max):
- 3.5W (Ta), 72W (Tc)
- Operating Temperature:
- -55°C ~ 175°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount, Wettable Flank
- Supplier Device Package:
- PowerDI5060-8 (Type UX)
DMTH45M5SPSWQ-13 FAQ
1.How can I place an order for DMTH45M5SPSWQ-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMTH45M5SPSWQ-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMTH45M5SPSWQ-13 reliable?
The price and inventory of DMTH45M5SPSWQ-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMTH45M5SPSWQ-13 is usually 5 days.
3.What payment methods are accepted for DMTH45M5SPSWQ-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMTH45M5SPSWQ-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMTH45M5SPSWQ-13?
DMTH45M5SPSWQ-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMTH45M5SPSWQ-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMTH45M5SPSWQ-13?
For technical support, including DMTH45M5SPSWQ-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMTH45M5SPSWQ-13 requirements.
6.How does Aetrix verify that DMTH45M5SPSWQ-13 is sourced from the original manufacturer or authorized distributors?
All DMTH45M5SPSWQ-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMTH45M5SPSWQ-13 meets industry standards.
7.What is the process for return or replacement of DMTH45M5SPSWQ-13?
All DMTH45M5SPSWQ-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMTH45M5SPSWQ-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMTH45M5SPSWQ-13 part is unused and in its original packaging.
Return procedure for DMTH45M5SPSWQ-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMTH45M5SPSWQ-13 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
