My Inquiry
My Account
Diodes Incorporated DMTH6010LPSW-13
- Part No.:
- DMTH6010LPSW-13
- Manufacturer:
- Diodes Incorporated
- Category:
- FETs, MOSFETs
- Package:
- 8-PowerTDFN
- Datasheet:
-
DMTH6010LPSW-13.pdf
- Description:
- MOSFET N-CH 60V 15.5A/80A PWRDI
- Quantity:
- Payment:
- Shipping:
Inventory:2,200
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DMTH6010LPSW from Diodes Incorporated is a 60V, 8 mΩ (at VGS = 10 V), 80 A N-channel enhancement-mode MOSFET in PowerDI5060-8 package, rated for +175°C operation and qualified to AEC-Q standards. It delivers low conduction loss and fast switching for high-efficiency power conversion in automotive body electronics and engine management systems.
For engineers reviewing the DMTH6010LPSW datasheet, DMTH6010LPSW pinout, DMTH6010LPSW application, or DMTH6010LPSW equivalent, key selection criteria include RDS(ON) at 4.5 V (12 mΩ), 100% production-tested UIS robustness, wettable flank terminals for automated optical inspection, and thermal resistance RθJC of 2.0°C/W.
Technical Context
This MOSFET employs trench-gate silicon technology optimized for low RDS(ON) while maintaining controlled gate charge (Qg = 41.3 nC at VGS = 10 V) and fast switching (tF = 9.7 ns). Its internal structure integrates an optimized body diode with tRR = 35.4 ns and QRR = 38.2 nC, supporting synchronous rectification and hard-switched topologies.
The device features a thermally enhanced PowerDI5060-8 package with exposed drain pad for low RθJC, JEDEC-compliant wettable flanks, and a gate threshold voltage (VGS(TH)) of 1–3 V - enabling direct drive from 3.3 V and 5 V controllers without level-shifting.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | 60 V - Supports 48 V nominal automotive bus with 20 % margin for load dump transients. |
| RDS(ON) | 8 mΩ @ VGS = 10 V - Enables <1.3 W conduction loss at 40 A continuous drain current. |
| ID (TC = 25°C) | 80 A - Rated for high-current DC-DC output stages with external heatsinking. |
| Qg | 41.3 nC @ VGS = 10 V - Determines gate driver power requirement and switching transition time. |
| RθJC | 2.0°C/W - Enables efficient heat transfer from junction to PCB copper pad or heatsink interface. |
| tRR | 35.4 ns - Limits reverse recovery loss and EMI in high-frequency synchronous buck converters. |
| TJ max | +175°C - Certified for under-hood automotive environments per AEC-Q101 requirements. |
Pinout & Package
Package: PowerDI5060-8 (SWP), surface-mount, thermally enhanced with exposed drain pad and wettable flank leads.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (S) | Source | Main current return path; tied to ground or low-side reference in half-bridge configurations. |
| 2,3,6,7 (D) | Drain | High-current input/output node; electrically and thermally connected to exposed metal pad on bottom side. |
| 4 (G) | Gate | Control terminal requiring <41.3 nC charge for full enhancement; sensitive to ESD and ringing. |
| 5,8 (S) | Source | Additional source connections reduce package inductance and improve current sharing in parallel layouts. |
Key Features
| Feature | Design Value |
|---|---|
| 100% UIS tested | Guarantees avalanche energy handling up to 20 mJ (IAS = 20 A, L = 0.1 mH) in production - eliminates field failure risk from inductive turn-off stress. |
| Wettable flank leads | Enables automated optical inspection (AOI) of solder joint integrity on all eight terminals - critical for automotive zero-defect manufacturing. |
| Low Qgd/Qg ratio | Qgd = 8.8 nC / Qg = 41.3 nC ≈ 21 % - improves Miller immunity and enables stable operation with moderate gate resistors in high-dV/dt environments. |
| AEC-Q101 qualified | Validated for automotive applications including engine control modules and body domain controllers per stress test requirements (HTOL, TC, HTRB, etc.). |
| Green, RoHS-compliant | Halogen- and antimony-free (<900 ppm Br/Cl, <1000 ppm Sb); matte tin annealed finish ensures reliable solderability per MIL-STD-202. |
Applications
| Engine Control Unit (ECU) Power Stage | Automotive Body Control Module (BCM) |
|---|---|
Use Scenario: High-side switch for fuel injector drivers and ignition coil pre-drivers in gasoline/diesel ECUs. IC Role / Device Role / Timing Role: N-channel high-side switch with bootstrap gate drive; handles repetitive 80 A pulsed loads at ≤1 kHz. Use Value: Low RDS(ON) minimizes I²R heating during extended cranking; +175°C rating ensures reliability near hot engine blocks. |
Use Scenario: Load switch for HVAC blower motors, seat heaters, and lighting zones in BCMs. IC Role / Device Role / Timing Role: Low-side power switch controlled by MCU GPIO or dedicated driver IC; supports PWM dimming and soft-start. Use Value: Fast tF = 9.7 ns reduces switching loss at 20 kHz PWM; wettable flanks ensure AOI pass rate >99.99% in Tier-1 assembly lines. |
| 48 V–12 V DC-DC Converter Primary Switch | Start-Stop System Energy Recovery Circuit |
Use Scenario: Primary-side synchronous rectifier in bidirectional 48 V–12 V buck-boost converters for mild hybrid vehicles. IC Role / Device Role / Timing Role: High-current, high-frequency switching element operating at 200–500 kHz with 50 % duty cycle. Use Value: Coss = 746 pF and low Qrr = 38.2 nC reduce capacitive and recovery losses - improving efficiency by ≥1.2 % at 10 kW output. |
Use Scenario: Regenerative braking energy capture switch in 48 V start-stop systems with supercapacitor buffer. IC Role / Device Role / Timing Role: Unidirectional energy transfer switch activated during deceleration; conducts up to 64.5 A at VGS = 4.5 V. Use Value: RDS(ON) = 12 mΩ @ 4.5 V enables direct MCU drive without gate driver - reducing BOM count and layout area. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar N-channel power MOSFET applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMTH6010LPSWQ | Identical electrical specs; AEC-Q101 certified with additional automotive qualification testing (e.g., AEC-Q200 passive component stress). | Required for safety-critical automotive functions where full PPAP documentation and lot traceability are mandated. | Select DMTH6010LPSWQ when automotive OEM requires full AEC-Q101 compliance documentation and extended reliability reporting. |
| IPB070N10N5ATMA1 (Infineon) | 100 V VDSS, 7.0 mΩ @ 10 V, TO-263-7 package; higher voltage rating but larger footprint and no wettable flanks. | Suitable for industrial 48 V systems where space constraints are less stringent and AOI is not required. | Choose IPB070N10N5ATMA1 only if system requires 100 V blocking or existing TO-263 layout reuse - not drop-in compatible. |
Compared with DMTH6010LPSW, the DMTH6010LPSWQ offers identical performance with full automotive qualification documentation, while the Infineon IPB070N10N5ATMA1 trades wettable flanks and compact PowerDI5060-8 for higher voltage headroom and legacy package compatibility - making DMTH6010LPSW optimal for space-constrained, AOI-driven automotive production.
Availability
DMTH6010LPSW is available at Aetrix Electronics and suitable for engine management systems, body control electronics, and DC-DC converters requiring stable component supply, automotive-grade reliability, and lead-free manufacturing compliance.
Supply support for DMTH6010LPSW includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-reliability power management, signal integrity, and protection solutions for automotive, industrial, and computing markets.
This MOSFET belongs to Diodes' Automotive Power Solutions product line, engineered specifically for under-hood and chassis-mounted applications demanding AEC-Q101 qualification, high-temperature operation, and robust transient immunity.
FAQ
What is the maximum continuous drain current at TC = 100°C?
The DMTH6010LPSW supports 56 A continuous drain current at case temperature of 100°C, as specified in the Absolute Maximum Ratings table. This derating reflects thermal limits of the PowerDI5060-8 package and must be validated against actual board-level thermal design using RθJC = 2.0°C/W and ambient conditions.
Does this MOSFET require a gate driver for 3.3 V MCU control?
No - the gate threshold voltage (VGS(TH)) ranges from 1 V to 3 V, and RDS(ON) is fully characterized down to VGS = 4.5 V (12 mΩ). A 3.3 V logic output can partially enhance the device, but full 80 A capability requires ≥4.5 V; for robust 20+ A switching, a level-shifting gate driver is recommended.
How does the wettable flank feature impact PCB assembly yield?
The wettable flank geometry on all eight leads enables reliable side-view optical inspection of solder fillets, directly increasing first-pass yield in automated SMT lines. Diodes specifies compliant solder paste volume and reflow profiles that achieve >99.99% AOI pass rates in automotive-tier production, eliminating manual visual inspection.
Is the body diode suitable for synchronous rectification in a 400 kHz buck converter?
Yes - with tRR = 35.4 ns and QRR = 38.2 nC, the integrated body diode supports synchronous rectification up to 500 kHz. However, for lowest loss, pairing with an external Schottky diode or using complementary FETs is advised above 300 kHz due to diode conduction loss during dead-time.
DMTH6010LPSW-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-PowerTDFN
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- N-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 60 V
- Current - Continuous Drain (Id) @ 25°C:
- 15.5A (Ta), 80A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 4.5V, 10V
- Rds On (Max) @ Id, Vgs:
- 8mOhm @ 20A, 10V
- Vgs(th) (Max) @ Id:
- 3V @ 250µA
- Gate Charge (Qg) (Max) @ Vgs:
- 41.3 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 2090 pF @ 30 V
- FET Feature:
- -
- Power Dissipation (Max):
- 2.9W (Ta), 75W (Tc)
- Operating Temperature:
- -55°C ~ 175°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PowerDI5060-8 (Type Q)
DMTH6010LPSW-13 FAQ
1.How can I place an order for DMTH6010LPSW-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for DMTH6010LPSW-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DMTH6010LPSW-13 reliable?
The price and inventory of DMTH6010LPSW-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DMTH6010LPSW-13 is usually 5 days.
3.What payment methods are accepted for DMTH6010LPSW-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DMTH6010LPSW-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DMTH6010LPSW-13?
DMTH6010LPSW-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DMTH6010LPSW-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DMTH6010LPSW-13?
For technical support, including DMTH6010LPSW-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DMTH6010LPSW-13 requirements.
6.How does Aetrix verify that DMTH6010LPSW-13 is sourced from the original manufacturer or authorized distributors?
All DMTH6010LPSW-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DMTH6010LPSW-13 meets industry standards.
7.What is the process for return or replacement of DMTH6010LPSW-13?
All DMTH6010LPSW-13 units undergo pre-shipment inspection (PSI). If there is an issue with DMTH6010LPSW-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DMTH6010LPSW-13 part is unused and in its original packaging.
Return procedure for DMTH6010LPSW-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DMTH6010LPSW-13 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
