My Inquiry
My Account
Infineon Technologies IPA60R380P6XKSA1
- Part No.:
- IPA60R380P6XKSA1
- Manufacturer:
- Infineon Technologies
- Category:
- FETs, MOSFETs
- Package:
- TO-220-3 Full Pack
- Datasheet:
-
IPA60R380P6XKSA1.pdf
- Description:
- MOSFET N-CH 600V 10.6A TO220-FP
- Quantity:
- Payment:
- Shipping:
Inventory:437
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
IPA60R380P6XKSA1 from Infineon Technologies is a 600 V, 380 mΩ CoolMOS™ P6 superjunction power MOSFET in PG-TO220 FullPAK package, featuring 19 nC total gate charge, 500 A/µs body diode di/dt rating, and 2500 Vrms insulation withstand voltage. It serves as a high-efficiency primary-side switch in hard-switched and resonant SMPS topologies for server PSUs and telecom rectifiers.
For engineers reviewing the IPA60R380P6XKSA1 datasheet, IPA60R380P6XKSA1 pinout, IPA60R380P6XKSA1 application, or IPA60R380P6XKSA1 equivalent, key selection criteria include its low RDS(on)×Qg figure-of-merit (14.8 Ω·nC), high dv/dt ruggedness (100 V/ns), and validated commutation robustness in PFC boost stages.
Technical Context
This device implements a planar superjunction structure with optimized charge balance for reduced conduction and switching losses. Its gate threshold voltage (4.0 V typ.) and plateau voltage (6.1 V) enable stable operation with standard 12 V gate drivers while maintaining noise immunity.
The integrated body diode exhibits 232 ns reverse recovery time and 2.1 µC Qrr at 400 V, supporting ZVS-capable topologies. Thermal resistance from junction-to-case is 4.0 °C/W, requiring careful heatsink design due to the FullPAK's lower power dissipation limit (31 W at TC = 25°C).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS | 600 V - Supports 400 V DC bus designs with 50% voltage margin for surge and ringing. |
| RDS(on),max | 380 mΩ at Tj = 150°C - Enables <1.5 W conduction loss at 6.7 A continuous drain current. |
| Qg,typ | 19 nC - Reduces gate drive power and enables >100 kHz switching without excessive driver heating. |
| Eoss@400V | 2.7 µJ - Low output energy minimizes turn-on loss in hard-switched converters. |
| dv/dt ruggedness | 100 V/ns - Withstands fast transients in high-frequency bridge-leg configurations without false triggering. |
| Body diode di/dt | 500 A/µs - Ensures reliable commutation in LLC and phase-shifted full-bridge circuits. |
| VISO | 2500 Vrms - Meets reinforced insulation requirements for AC-DC adapters and industrial power supplies. |
Pinout & Package
IPA60R380P6XKSA1 uses the PG-TO220 FullPAK (TO-220FP) package with isolated tab. The plastic body provides creepage/clearance compliance, and the internal tab connects directly to the drain terminal for low-inductance high-current paths.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Gate | Control input; requires ≤30 V dynamic gate-source voltage; 7.8 Ω intrinsic gate resistance limits ringing. |
| Pin 2 / Tab | Drain | Main high-voltage power path; electrically isolated tab allows mounting on heatsink without external insulator. |
| Pin 3 | Source | Power return and gate reference; forms common node with internal body diode cathode. |
Key Features
| Feature | Design Value |
|---|---|
| Superjunction architecture | Enables 380 mΩ RDS(on) at 600 V rating-reducing conduction loss by ~35% vs. planar MOSFETs. |
| Low Eoss and Coss | 2.7 µJ Eoss and 42 pF Coss minimize capacitive turn-on loss in high-frequency PWM stages. |
| High di/dt-rated body diode | 500 A/µs commutation capability supports zero-current switching in resonant converters without snubbers. |
| Reinforced isolation | 2500 Vrms insulation withstand ensures safety compliance in Class II AC-DC power supplies. |
| Pb-free & halogen-free | Meets RoHS and JEDEC J-STD-020 MSL1 reflow standards for lead-free manufacturing. |
Applications
| Server Power Supply | Telecom Rectifier |
|---|---|
|
Use Scenario: Primary-side switch in 3.5 kW CRPS-compliant server PSU using asymmetric half-bridge topology. IC Role / Device Role / Timing Role: High-voltage switching element handling 380–400 V DC input with 100–200 kHz switching frequency. Use Value: 380 mΩ RDS(on) and 19 nC Qg reduce total switching + conduction loss to <2.1 W, enabling >96% efficiency at full load. |
Use Scenario: Active clamp forward converter in -48 V telecom rectifier operating at 150 kHz. IC Role / Device Role / Timing Role: Main power switch clamped during off-state to limit voltage overshoot and enable ZVS turn-on. Use Value: 100 V/ns dv/dt ruggedness prevents spurious turn-on during fast voltage transitions across the clamp capacitor. |
| PFC Boost Stage | LCD TV Backlight Inverter |
|
Use Scenario: Continuous conduction mode (CCM) boost PFC stage in 200 W LCD TV power board. IC Role / Device Role / Timing Role: Unidirectional high-side switch controlling inductor current to shape AC line input current. Use Value: 500 A/µs body diode di/dt rating ensures clean commutation during zero-crossing events without oscillation or shoot-through risk. |
Use Scenario: Half-bridge switch in CCFL backlight inverter driving 1.5 kV RMS lamps at 60 kHz. IC Role / Device Role / Timing Role: Fast-switching power transistor generating high-frequency square wave for transformer excitation. Use Value: Low 2.7 µJ Eoss reduces dead-time loss and improves waveform fidelity at high frequency and light loads. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-voltage power switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| IPP60R380P6 | Same die, PG-TO220-3 package with non-isolated tab; RthJC = 1.5 °C/W vs. 4.0 °C/W. | Requires insulating washer and thermal pad; higher power dissipation (83 W) but needs external isolation. | Select when thermal performance is critical and mechanical isolation can be implemented externally. |
| IPD60R380P6 | Same die, PG-TO252-3 (DPAK) surface-mount package; RthJC = 1.5 °C/W, RthJA = 35–45 °C/W on 6 cm² copper. | Suitable for compact SMT designs; limited to ≤10 A continuous current due to PCB thermal constraints. | Select for space-constrained consumer electronics where automated assembly and low profile are mandatory. |
Compared with IPP60R380P6 and IPD60R380P6, IPA60R380P6XKSA1 trades lower thermal performance (31 W vs. 83 W) for built-in isolation and simplified mechanical integration-ideal for cost-sensitive, safety-critical AC-DC systems where creepage distance and assembly yield matter most.
Availability
IPA60R380P6XKSA1 is available at Aetrix Electronics and suitable for server power supplies, telecom rectifiers, and PFC boost stages requiring stable component supply, long-term lifecycle support, and certified safety isolation.
Supply support for IPA60R380P6XKSA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive, and industrial control ICs and discrete devices.
The CoolMOS™ P6 series targets high-efficiency AC-DC and DC-DC conversion in computing, telecom, and industrial power supplies-optimized for low RDS(on)×Qg and robust hard-switching operation.
FAQ
What is the maximum continuous drain current for IPA60R380P6XKSA1 at 100°C case temperature?
The maximum continuous drain current is 6.7 A at TC = 100°C, as specified in Table 2 of the Rev. 2.4 datasheet. This rating is thermally limited by the FullPAK package's 4.0 °C/W junction-to-case thermal resistance and 150°C maximum junction temperature.
Does IPA60R380P6XKSA1 require a gate resistor for stability?
Yes-a gate resistor of 3.4 Ω is used in the datasheet's switching time test conditions (Table 7). While the device has 7.8 Ω intrinsic gate resistance, an external 3–10 Ω resistor is recommended to dampen ringing, control dV/dt, and prevent parasitic oscillation in high-di/dt layouts.
Can IPA60R380P6XKSA1 replace IPA60R380E6 in existing designs?
No-IPA60R380E6 belongs to the older CoolMOS™ E6 generation with higher Qg (25 nC) and RDS(on) (420 mΩ). Though pin-compatible, the P6 version delivers lower losses but may alter gate drive timing and loop stability; layout and compensation must be revalidated.
Is the body diode in IPA60R380P6XKSA1 suitable for synchronous rectification?
No-the body diode is not optimized for bidirectional conduction. Its 232 ns trr and 2.1 µC Qrr cause significant reverse recovery loss in synchronous rectifier positions. Dedicated low-Qrr MOSFETs or Schottky diodes are recommended for secondary-side rectification.
IPA60R380P6XKSA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- CoolMOS™ P6
- Package/Case:
- TO-220-3 Full Pack
- Packaging:
- Tube
- Product Status:
- Active
- FET Type:
- N-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 600 V
- Current - Continuous Drain (Id) @ 25°C:
- 10.6A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 10V
- Rds On (Max) @ Id, Vgs:
- 380mOhm @ 3.8A, 10V
- Vgs(th) (Max) @ Id:
- 4.5V @ 320µA
- Gate Charge (Qg) (Max) @ Vgs:
- 19 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 877 pF @ 100 V
- FET Feature:
- -
- Power Dissipation (Max):
- 31W (Tc)
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- PG-TO220-FP
IPA60R380P6XKSA1 FAQ
1.How can I place an order for IPA60R380P6XKSA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for IPA60R380P6XKSA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for IPA60R380P6XKSA1 reliable?
The price and inventory of IPA60R380P6XKSA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for IPA60R380P6XKSA1 is usually 5 days.
3.What payment methods are accepted for IPA60R380P6XKSA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for IPA60R380P6XKSA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for IPA60R380P6XKSA1?
IPA60R380P6XKSA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your IPA60R380P6XKSA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for IPA60R380P6XKSA1?
For technical support, including IPA60R380P6XKSA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your IPA60R380P6XKSA1 requirements.
6.How does Aetrix verify that IPA60R380P6XKSA1 is sourced from the original manufacturer or authorized distributors?
All IPA60R380P6XKSA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that IPA60R380P6XKSA1 meets industry standards.
7.What is the process for return or replacement of IPA60R380P6XKSA1?
All IPA60R380P6XKSA1 units undergo pre-shipment inspection (PSI). If there is an issue with IPA60R380P6XKSA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The IPA60R380P6XKSA1 part is unused and in its original packaging.
Return procedure for IPA60R380P6XKSA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
IPA60R380P6XKSA1 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
