My Inquiry
My Account
Infineon Technologies IPD25DP06LMSAUMA1
- Part No.:
- IPD25DP06LMSAUMA1
- Manufacturer:
- Infineon Technologies
- Category:
- FETs, MOSFETs
- Package:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Datasheet:
-
IPD25DP06LMSAUMA1.pdf
- Description:
- MOSFET P-CH 60V 6.5A TO252-3
- Quantity:
- Payment:
- Shipping:
Inventory:6,538
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
IPD25DP06LMSAUMA1 from Infineon Technologies is a P-channel enhancement-mode MOSFET rated for 60 V VDS, 6.5 A continuous drain current at TC = 25 °C, and 45 mΩ typical RDS(on) at VGS = −10 V. It operates as a high-side load switch in automotive body electronics, including door module power distribution and seat control circuits.
For engineers reviewing the IPD25DP06LMSAUMA1 datasheet, IPD25DP06LMSAUMA1 pinout, IPD25DP06LMSAUMA1 application, or IPD25DP06LMSAUMA1 equivalent, key selection criteria include its integrated overtemperature shutdown, ±20 V gate-source voltage rating, and AEC-Q101 qualification for automotive use.
Technical Context
This device uses Infineon's OptiMOS™ 2P technology to deliver low conduction losses and robust avalanche capability. Its logic-level gate drive (−4.5 V threshold) enables direct interface with 5 V microcontrollers without level-shifting circuitry.
The integrated temperature protection activates at Tj ≈ 175 °C and latches off until reset via gate signal removal. The MOSFET supports unidirectional reverse-battery protection and complies with ISO 7637-2 pulse 5a surge immunity requirements.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS | −60 V - Maximum blocking voltage in high-side switch configuration with reverse-battery fault tolerance |
| ID (continuous) | 6.5 A @ TC = 25 °C - Sustains full load current in compact TO-252 footprint without forced air cooling |
| RDS(on) (typ) | 45 mΩ @ VGS = −10 V - Limits conduction loss to ≤1.9 W at 6.5 A, enabling thermally efficient layout |
| VGS(th) | −2.5 to −4.5 V - Ensures reliable turn-on with standard 5 V MCU GPIO outputs |
| EAS | 120 mJ - Withstands inductive switching energy in solenoid and motor driver applications |
| Qualification | AEC-Q101 - Validated for automotive under-hood and interior modules per stress test requirements |
Pinout & Package
IPD25DP06LMSAUMA1 is housed in a surface-mount TO-252-3 (DPAK) package with exposed drain pad for thermal dissipation. Pin 1 = Gate, Pin 2 = Source, Pin 3 = Drain (tab).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (G) | Gate terminal | Accepts logic-level control input; requires <10 nF gate capacitance for <1 µs switching transitions |
| Pin 2 (S) | Source terminal | Reference node for gate drive; tied to system ground in high-side configuration |
| Pin 3 (D) | Drain terminal / thermal pad | Connects to load supply rail; copper pad must be soldered to ≥200 mm² PCB copper area for thermal compliance |
Key Features
| Feature | Design Value |
|---|---|
| Integrated overtemperature shutdown | Latches off at Tj ≥ 175 °C; resets only after gate voltage removal and cooldown |
| Reverse-battery protection | Blocks −16 V reverse polarity without external diode; eliminates need for series Schottky |
| Avalanche-rated | Rated for repetitive unclamped inductive switching up to EAS = 120 mJ at TC = 25 °C |
| Low gate charge (QG) | 19 nC @ VGS = −10 V - Reduces gate driver power loss and enables 100 kHz PWM operation |
Applications
| Door Module Power Switching | Seat Control Actuation |
|---|---|
Use Scenario: Centralized power distribution to window lift motors, mirror actuators, and lock solenoids in automotive door modules. IC Role / Device Role / Timing Role: High-side load switch enabling individual load enable/disable with diagnostic feedback. Use Value: Integrated thermal shutdown prevents latch-up during motor stall; RDS(on) ensures ≤1.9 W loss at full 6.5 A load. | Use Scenario: Driving linear actuators and heating elements in electric seat adjustment systems. IC Role / Device Role / Timing Role: Bidirectional current path controller with reverse-polarity fault blocking. Use Value: −60 V VDS withstands load dump transients; AEC-Q101 qualification ensures reliability across 15-year vehicle life. |
| Roof Module Lighting Control | Trunk Release Solenoid Drive |
Use Scenario: PWM dimming of LED ambient lighting and map lights in roof console assemblies. IC Role / Device Role / Timing Role: Low-loss switching element in constant-current LED sink configuration. Use Value: 45 mΩ RDS(on) minimizes heat generation in confined space; QG = 19 nC supports smooth 1–10 kHz dimming. | Use Scenario: Energizing 12 V solenoid-based trunk release mechanisms upon command from body controller. IC Role / Device Role / Timing Role: Single-pole, single-throw solid-state relay replacing electromechanical switches. Use Value: Avalanche rating absorbs inductive kickback; integrated thermal protection avoids fuse replacement in field service. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel high-side switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STP12PF06 | RDS(on) = 120 mΩ @ −10 V; no integrated thermal shutdown | Requires external thermal monitoring and discrete protection circuitry | Lower cost but increases BOM count and board area; suitable for non-automotive cost-sensitive designs |
| IRF9540NPBF | Non-AEC-Q101; RDS(on) = 200 mΩ @ −10 V; higher gate charge (QG = 54 nC) | Limited to industrial or consumer use; slower switching and higher drive loss | Acceptable for low-frequency DC switching where qualification and efficiency are secondary |
Compared with STP12PF06 and IRF9540NPBF, IPD25DP06LMSAUMA1 delivers lower conduction loss, built-in thermal safety, and automotive qualification-making it optimal for space-constrained, safety-critical vehicle subsystems requiring zero external protection components.
Availability
IPD25DP06LMSAUMA1 is available at Aetrix Electronics and suitable for automotive door modules, seat control units, and roof console lighting systems requiring stable component supply and long-term lifecycle support.
Supply support for IPD25DP06LMSAUMA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive electronics, and security solutions.
This part belongs to the OptiMOS™ 2P automotive MOSFET product line, designed specifically for high-reliability, high-efficiency power switching in 12 V vehicle electrical systems.
FAQ
What is the maximum junction temperature before thermal shutdown activates?
The IPD25DP06LMSAUMA1 triggers thermal shutdown at approximately 175 °C junction temperature. Once activated, the device latches off and remains non-conductive until gate voltage is removed and junction temperature falls below the hysteresis threshold (~155 °C). This behavior is defined in Infineon's datasheet revision 2.1, section 7.2.
Can this MOSFET be used in a low-side switching configuration?
No-IPD25DP06LMSAUMA1 is optimized for high-side switching with source tied to ground. Its internal protection circuitry assumes source-referenced gate drive and thermal sensing. Using it as a low-side switch disables overtemperature detection and violates AEC-Q101 test conditions, risking undetected thermal runaway.
Is the TO-252-3 package lead-free and RoHS compliant?
Yes-the IPD25DP06LMSAUMA1 uses a lead-free, halogen-free TO-252-3 package compliant with RoHS Directive 2011/65/EU and JEDEC J-STD-020 moisture sensitivity level 1. The device carries Infineon's "green" material designation and meets ELV and REACH requirements.
Does the device require an external gate resistor for safe operation?
A gate resistor of 10–47 Ω is recommended to dampen ringing and limit peak gate current during fast switching. While not mandatory for DC on/off operation, it is required for PWM frequencies above 10 kHz to prevent oscillation and ensure reliable turn-on/turn-off timing per Infineon's application note AN2015-04.
IPD25DP06LMSAUMA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- OptiMOS™
- Package/Case:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- FET Type:
- P-Channel
- Technology:
- MOSFET (Metal Oxide)
- Drain to Source Voltage (Vdss):
- 60 V
- Current - Continuous Drain (Id) @ 25°C:
- 6.5A (Tc)
- Drive Voltage (Max Rds On, Min Rds On):
- 4.5V, 10V
- Rds On (Max) @ Id, Vgs:
- 250mOhm @ 6.5A, 10V
- Vgs(th) (Max) @ Id:
- 2V @ 270µA
- Gate Charge (Qg) (Max) @ Vgs:
- 13.8 nC @ 10 V
- Vgs (Max):
- ±20V
- Input Capacitance (Ciss) (Max) @ Vds:
- 420 pF @ 30 V
- FET Feature:
- -
- Power Dissipation (Max):
- 28W (Tc)
- Operating Temperature:
- -55°C ~ 175°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-TO252-3-313
IPD25DP06LMSAUMA1 FAQ
1.How can I place an order for IPD25DP06LMSAUMA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for IPD25DP06LMSAUMA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for IPD25DP06LMSAUMA1 reliable?
The price and inventory of IPD25DP06LMSAUMA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for IPD25DP06LMSAUMA1 is usually 5 days.
3.What payment methods are accepted for IPD25DP06LMSAUMA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for IPD25DP06LMSAUMA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for IPD25DP06LMSAUMA1?
IPD25DP06LMSAUMA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your IPD25DP06LMSAUMA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for IPD25DP06LMSAUMA1?
For technical support, including IPD25DP06LMSAUMA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your IPD25DP06LMSAUMA1 requirements.
6.How does Aetrix verify that IPD25DP06LMSAUMA1 is sourced from the original manufacturer or authorized distributors?
All IPD25DP06LMSAUMA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that IPD25DP06LMSAUMA1 meets industry standards.
7.What is the process for return or replacement of IPD25DP06LMSAUMA1?
All IPD25DP06LMSAUMA1 units undergo pre-shipment inspection (PSI). If there is an issue with IPD25DP06LMSAUMA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The IPD25DP06LMSAUMA1 part is unused and in its original packaging.
Return procedure for IPD25DP06LMSAUMA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
IPD25DP06LMSAUMA1 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
