International Rectifier IRFZ46ZSTRLPBF

Overview

IRFZ46ZSTRLPBF from International Rectifier is a HEXFET power MOSFET supplied in the TO-263-3, D2PAK (2 Leads + Tab), TO-263AB package. The device is used as a n-channel. switching element where drain-source voltage rating, conduction loss, gate charge, avalanche behavior, and package thermal resistance must be matched to the circuit.

For engineers reviewing the IRFZ46ZSTRLPBF datasheet, IRFZ46ZSTRLPBF pinout, IRFZ46ZSTRLPBF application, or IRFZ46ZSTRLPBF equivalent, this device is commonly used in power load switching, dc-dc converter stages, motor and inductive load control, and repair and bom continuity designs. For engineers comparing IRFZ46ZSTRLPBF against other MOSFETs, the useful checks are polarity, package, gate-drive requirement, thermal path, and switching-loss behavior. The bulk supply entry and package style should be confirmed before using it as a direct BOM replacement.

Technical Context

In a switching circuit, IRFZ46ZSTRLPBF may serve as a low-side switch, high-side device, synchronous rectifier, motor-control transistor, battery-path switch, or converter power device depending on polarity and topology. The package tab or exposed pad normally carries the drain connection and dominates the thermal path.

D²Pak / TO-263 power package with drain-tab heat spreading through PCB copper or heatsink-assisted layout. Gate-drive selection should account for total gate charge, Miller plateau behavior, switching frequency, and allowable VGS range; using only RDS(on) to compare MOSFETs can lead to excessive switching loss or poor transient behavior.

Thermal validation is required at the final load current because rated current values assume defined case or board conditions. For inductive loads, the avalanche rating, body-diode recovery, clamp network, and safe operating area should be checked with the actual load profile.

Key Specifications

Pinout & Package

The IRFZ46ZSTRLPBF pinout must be reviewed from the exact package drawing because terminal function, thermal path, and mechanical footprint are linked in this product family. TO-263-3, D2PAK (2 Leads + Tab), TO-263AB package information and Bulk packaging for this line.

For PCB design, use the package drawing and confirm copper area, soldering method, creepage or clearance where applicable, and the final orderable suffix before layout or replacement approval. D²Pak / TO-263 power package with drain-tab heat spreading through PCB copper or heatsink-assisted layout.

Key Features

• N-channel. power MOSFET for switching and power-control circuits.
• Drain-source voltage rating must be checked against bus and transient conditions.
• RDS(on) and package thermal path determine conduction-loss and temperature rise.
• Gate charge and Miller behavior should be checked for switching-frequency and driver selection.
• Body-diode, avalanche, and SOA behavior should be reviewed for inductive or reverse-current paths.
• TO-263-3, D2PAK (2 Leads + Tab), TO-263AB package controls PCB footprint, soldering method, and heat spreading.

Applications

Equivalent & Alternatives

When evaluating IRFZ46ZSTRLPBF equivalent devices, engineers should compare only specific orderable alternatives and should verify package footprint, pinout, electrical ratings, thermal data, qualification status, and suffix or packing requirements before substitution.

Compared with related alternatives, IRFZ46ZSTRLPBF should remain the preferred sourcing reference when the existing BOM, PCB footprint, and qualification documentation require the exact International Rectifier orderable device.

Quality

IRFZ46ZSTRLPBF should be sourced as original International Rectifier / Infineon inventory through traceable and controlled supply channels. Quality verification may include package inspection, top-mark validation, label and lot review, solderability inspection, moisture-sensitivity handling review, and electrical screening according to the target production requirement.

Because IRFZ46ZSTRLPBF is used in power switching and converter circuits, final validation should include the actual PCB footprint, thermal path, electrical stress, operating temperature, and fault-condition behavior. Traceable sourcing helps reduce counterfeit risk and supports repeatable performance in production, repair, and maintenance programs.

Availability

IRFZ46ZSTRLPBF available at Aetrix Electronics and suitable for power switching and converter circuits requiring stable component supply, package matching, and controlled replacement planning.

Supply support may include scheduled delivery planning, volume procurement support, BOM continuity assistance, traceable sourcing management, and long-term availability support for OEM manufacturers, repair programs, and electronics production teams.

For production or repair deployment, confirming package type, orderable suffix, lifecycle status, environmental requirement, electrical rating, thermal condition, and sourcing continuity helps reduce procurement risk and improve manufacturing stability.

Manufacturer

International Rectifier was a semiconductor manufacturer known for power MOSFETs, IGBTs, gate drivers, power-management ICs, intelligent power switches, photovoltaic relays, and power modules. International Rectifier products became part of Infineon Technologies' power semiconductor portfolio after the acquisition of International Rectifier.

The IRFZ46ZSTRLPBF ordering line should be reviewed with the relevant International Rectifier legacy technical documentation and Infineon supply-chain references where available. This is especially important for legacy MOSFETs, IRAM modules, PV relay products, and automotive AUIR power devices.

FAQ

What is IRFZ46ZSTRLPBF used for?

IRFZ46ZSTRLPBF is used in power switching and converter circuits. The exact application depends on the technical documentation electrical ratings, package, pinout, and thermal capability.

Where can I find the IRFZ46ZSTRLPBF technical documentation?

The IRFZ46ZSTRLPBF technical documentation should be obtained from International Rectifier / Infineon documentation or an authorized technical documentation source. It should be used to confirm ratings, package information, pinout, thermal data, and test conditions.

What should be considered in IRFZ46ZSTRLPBF pinout design?

Pinout design should confirm the package drawing, terminal functions, thermal path, high-current routing or isolation spacing, and whether the orderable suffix changes package or packing details.

Can IRFZ46ZSTRLPBF be used as a direct replacement?

IRFZ46ZSTRLPBF can be used as a direct replacement only when the package footprint, pinout, electrical ratings, thermal behavior, and qualification status match the original design.

What are common IRFZ46ZSTRLPBF equivalent solutions?

Equivalent solutions should be limited to specific orderable devices with verified technical documents. Suffix variants may differ in package, reel orientation, lead finish, qualification, or manufacturing status.