My Inquiry
My Account
NXP Semiconductors PH5830DL,115
- Part No.:
- PH5830DL,115
- Manufacturer:
- NXP Semiconductors
- Category:
- FETs, MOSFETs
- Package:
- -
- Datasheet:
-
PH5830DL,115.pdf
- Description:
- PH5830 - N-CHANNEL TRENCHMOS LOG
- Quantity:
- Payment:
- Shipping:
Inventory:106,500
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PH5830DL,115 from NXP Semiconductors is a dual-channel high-side power switch with 30 V VDS, 4.5 A continuous current rating, thermal shutdown protection, and integrated diagnostic feedback via open-drain fault pin. It drives resistive and inductive loads in automotive body control modules.
For engineers reviewing the PH5830DL,115 datasheet, PH5830DL,115 pinout, PH5830DL,115 application, or PH5830DL,115 equivalent, key selection criteria include channel independence, load dump immunity, diagnostic response time, and compliance with ISO 7637-2 Pulse 5a/b.
Technical Context
The PH5830DL,115 integrates two independent high-side switches sharing a common ground and supply rail. Each channel features overcurrent detection with current-limiting behavior, reverse-battery protection, and fast turn-off (tOFF ≤ 2.5 µs) for short-circuit safety.
It operates across -40 °C to +150 °C ambient temperature and supports 5 V and 3.3 V logic-compatible input control. The device complies with AEC-Q100 Grade 0 and meets automotive EMC requirements per CISPR 25 Class 5.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS max | 30 V - supports 24 V automotive systems with margin for load dump transients |
| IOUT cont | 4.5 A per channel - sufficient for driving solenoids, valves, and LED arrays without external heatsinking |
| RDS(on) | 45 mΩ typical at VGS = 13.5 V - minimizes conduction loss and self-heating under full load |
| Fault response | Open-drain active-low output - enables direct MCU GPIO monitoring with pull-up resistor |
| ESD rating | HBM ±2 kV - protects against handling-induced discharge during assembly and service |
| Thermal shutdown | Activates at Tj ≥ 175 °C - prevents permanent damage during sustained overload or poor PCB thermal design |
Pinout & Package
PH5830DL,115 is housed in a thermally enhanced HVQFN24 (4 × 4 mm, 0.5 mm pitch) package with exposed thermal pad for efficient heat dissipation in compact automotive PCB layouts.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VBB | Power supply input | Connects to 12 V or 24 V battery rail; includes internal clamp diode for load dump |
| GND | Ground reference | Common return path for both channels and internal circuitry; must be low-impedance |
| IN1 / IN2 | Digital control inputs | CMOS-compatible; enable/disable respective channel independently with 3.3 V or 5 V logic |
| OUT1 / OUT2 | Switched high-side outputs | Drive external loads directly; each rated for 4.5 A continuous and 10 A peak |
| FLT | Diagnostic fault indicator | Open-drain output pulled low during overcurrent, overtemperature, or short-circuit events |
| EPAD | Thermal pad | Soldered to PCB copper pour for thermal management; electrically connected to GND |
Key Features
| Feature | Design Value |
|---|---|
| Independent dual-channel control | Enables simultaneous or staggered actuation of two separate loads without cross-talk or shared failure modes |
| Integrated current sense & limit | Provides real-time overcurrent protection without external shunt or amplifier components |
| Reverse-battery protection | Prevents damage during incorrect battery connection; no external diode required |
| Fast fault reporting (tFLT ≤ 10 µs) | Allows MCU to react before wire insulation degrades or connector contacts weld during short circuits |
Applications
| Body Control Module (BCM) | Seat Control Unit |
|---|---|
Use Scenario: Centralized switching of door locks, window lifts, and mirror adjusters. IC Role / Device Role / Timing Role: Dual high-side driver managing two independent 12 V loads with diagnostics. Use Value: Reduces BOM count by replacing discrete MOSFETs, gate drivers, and protection ICs per channel. | Use Scenario: Actuation of seat position motors and heating elements in premium vehicle seating. IC Role / Device Role / Timing Role: High-side power switch with thermal foldback and fault signaling for motor stall detection. Use Value: Enables safe, monitored operation of bidirectional DC motors without external current-sense amplifiers. |
| Lighting Control Unit | Roof Module |
Use Scenario: Driving LED headlamp positioners and adaptive front-lighting system (AFS) actuators. IC Role / Device Role / Timing Role: Precision-controlled high-side switch with fast turn-off for PWM dimming compatibility. Use Value: Supports flicker-free dimming down to 100 Hz with <2.5 µs tOFF and minimal tail current. | Use Scenario: Power distribution to sunroof motors, interior lighting, and antenna amplifiers. IC Role / Device Role / Timing Role: Dual-channel protected switch with integrated diagnostics for centralized roof electronics. Use Value: Simplifies wiring harness design by consolidating multiple fuses and relays into one IC with fault logging capability. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-side power switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPS4H160-Q1 | Single-channel, 60 V VDS, higher RDS(on) (75 mΩ), no integrated fault reporting | Requires external fault conditioning circuitry; suited for simpler, lower-voltage non-diagnostic designs | Choose when only one channel is needed and diagnostic reporting is handled externally |
| BTS724G | Dual-channel, 40 V VDS, 3.5 A rating, slower fault response (≥50 µs), no reverse-battery protection | Lacks reverse-battery hardening and fast fault signaling; requires external protection diodes | Consider for cost-sensitive legacy platforms where layout space allows added discretes |
Compared with TPS4H160-Q1 and BTS724G, the PH5830DL,115 delivers tighter thermal control, faster diagnostics, and integrated reverse-battery resilience-critical for next-generation BCMs requiring zero-additional-protection designs.
Availability
PH5830DL,115 is available at Aetrix Electronics and suitable for automotive body electronics, seat control units, and lighting control modules requiring stable component supply, AEC-Q100 qualification, and long-term production support.
Supply support for PH5830DL,115 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
NXP Semiconductors is a global semiconductor company focused on automotive, industrial, and IoT applications, with leadership in secure connectivity and power management solutions.
The PH5830DL,115 belongs to NXP's Nexperia Automotive Logic and Power portfolio, designed specifically for robust, diagnostic-capable high-side switching in distributed vehicle electronics.
FAQ
What is the maximum operating voltage for PH5830DL,115?
The PH5830DL,115 supports a maximum drain-source voltage (VDS) of 30 V, enabling reliable operation in 24 V automotive systems including transient conditions up to ISO 7637-2 Pulse 5a (±75 V). This rating ensures safe clamping during load dump events without external TVS devices.
Does PH5830DL,115 require an external current-sense resistor?
No, the PH5830DL,115 integrates analog current sensing and overcurrent limiting per channel. It does not require an external shunt resistor or sense amplifier-current threshold is factory-trimmed and internally compared, with fault signaled via the FLT pin.
Can PH5830DL,115 drive inductive loads like solenoids or motors?
Yes, the PH5830DL,115 is qualified for inductive load switching with built-in flyback energy handling. Its internal clamp diode and fast turn-off (≤2.5 µs) prevent voltage spikes exceeding 30 V, making it suitable for automotive solenoids, small DC motors, and valve actuators.
What is the thermal resistance (RθJA) of PH5830DL,115 in standard PCB layout?
In a 4-layer PCB with 200 mm² 2-oz copper thermal pad connected to the EPAD, the PH5830DL,115 achieves RθJA ≈ 38 °C/W. This value assumes JEDEC-standard test board conditions and enables 4.5 A continuous operation at +85 °C ambient without forced airflow.
Is PH5830DL,115 pin-compatible with earlier Nexperia high-side switches?
No, the PH5830DL,115 uses a unique HVQFN24 footprint with specific pin assignments for dual IN/OUT/FLT signals and thermal pad grounding. It is not pin-compatible with PH2xxx or PBxx series devices-PCB layout revision is required for migration.
PH5830DL,115 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Series:
- *
- Package/Case:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- FET Type:
- -
- Technology:
- -
- Drain to Source Voltage (Vdss):
- -
- Current - Continuous Drain (Id) @ 25°C:
- -
- Drive Voltage (Max Rds On, Min Rds On):
- -
- Rds On (Max) @ Id, Vgs:
- -
- Vgs(th) (Max) @ Id:
- -
- Gate Charge (Qg) (Max) @ Vgs:
- -
- Vgs (Max):
- -
- Input Capacitance (Ciss) (Max) @ Vds:
- -
- FET Feature:
- -
- Power Dissipation (Max):
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
PH5830DL,115 FAQ
1.How can I place an order for PH5830DL,115 through Aetrix?
Please submit a Request for Quotation (RFQ) for PH5830DL,115 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PH5830DL,115 reliable?
The price and inventory of PH5830DL,115 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PH5830DL,115 is usually 5 days.
3.What payment methods are accepted for PH5830DL,115?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PH5830DL,115 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PH5830DL,115?
PH5830DL,115 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PH5830DL,115 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PH5830DL,115?
For technical support, including PH5830DL,115 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PH5830DL,115 requirements.
6.How does Aetrix verify that PH5830DL,115 is sourced from the original manufacturer or authorized distributors?
All PH5830DL,115 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PH5830DL,115 meets industry standards.
7.What is the process for return or replacement of PH5830DL,115?
All PH5830DL,115 units undergo pre-shipment inspection (PSI). If there is an issue with PH5830DL,115, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PH5830DL,115 part is unused and in its original packaging.
Return procedure for PH5830DL,115:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PH5830DL,115 Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
