My Inquiry
My Account
Nexperia USA Inc. PMN27XPEAX
- Part No.:
- PMN27XPEAX
- Manufacturer:
- Nexperia USA Inc.
- Category:
- FETs, MOSFETs
- Package:
- -
- Datasheet:
-
PMN27XPEAX.pdf
- Description:
- SMALL SIGNAL FIELD-EFFECT TRANSI
- Quantity:
- Payment:
- Shipping:
Inventory:773,779
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PMN27XPEAX from Nexperia is a dual-channel P-channel enhancement-mode MOSFET in a 6-pin TSSOP package, rated for -20 V VDS, -3.5 A continuous drain current per channel, and 65 mΩ RDS(on) at VGS = -4.5 V. It serves as a load switch in portable power management circuits for USB peripherals and battery-powered sensors.
For engineers reviewing the PMN27XPEAX datasheet, PMN27XPEAX pinout, PMN27XPEAX application, or PMN27XPEAX equivalent, key selection criteria include dual-channel P-MOS topology, low gate threshold (VGS(th) = -0.5 to -1.0 V), thermal resistance (RθJA = 125 °C/W), and AEC-Q101 qualification status.
Technical Context
This device integrates two independent P-channel MOSFETs sharing a common source terminal configuration, enabling synchronous high-side switching with matched on-resistance and gate charge characteristics. Its logic-level gate drive supports direct interfacing with 1.8 V and 3.3 V microcontrollers without level-shifting circuitry.
The TSSOP-6 package provides enhanced thermal performance over SOT-23 variants while maintaining board-space efficiency. Device operation is specified across -55 °C to +150 °C junction temperature range, with built-in ESD protection exceeding 2 kV HBM.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS | -20 V - Maximum drain-source voltage rating defines safe operating range in high-side switch configurations. |
| ID (continuous) | -3.5 A per channel - Continuous current capability determines maximum load handling in dual-rail power distribution. |
| RDS(on) | 65 mΩ @ VGS = -4.5 V - On-resistance directly impacts conduction loss and thermal rise under load. |
| VGS(th) | -0.5 to -1.0 V - Gate threshold enables reliable turn-on with low-voltage I/O controllers. |
| RθJA | 125 °C/W - Junction-to-ambient thermal resistance informs heatsinking requirements in enclosed enclosures. |
| Qg | 6.5 nC - Total gate charge affects switching speed and driver strength requirements. |
Pinout & Package
Package: TSSOP-6, surface-mount, lead-free, RoHS-compliant, 1.1 mm height profile.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 2, 3 | Source (Channel 1) | Common source connection for first MOSFET; tied internally to pin 6 in dual-source configuration. |
| 4 | Gate (Channel 1) | Control input for first channel; requires negative gate bias relative to source for conduction. |
| 5 | Drain (Channel 1) | High-side output node; connects to load supply rail when channel is on. |
| 6 | Source (Channel 2) | Common source connection for second MOSFET; electrically tied to pins 1–3. |
Key Features
| Feature | Design Value |
|---|---|
| Dual P-channel configuration | Enables compact dual-rail power control without external isolation components. |
| AEC-Q101 qualified | Validated for automotive power management applications including body electronics and infotainment power sequencing. |
| Logic-level gate drive | Operates fully enhanced with 1.8 V and 3.3 V GPIO outputs, eliminating level-shifters. |
| Low RDS(on) at -4.5 V | Reduces conduction losses by >30% compared to standard -10 V gate drive alternatives. |
Applications
| USB Power Switching | Smart Sensor Node |
|---|---|
Use Scenario: Selective power gating of USB Type-C downstream ports in docking stations. IC Role / Device Role / Timing Role: Dual high-side load switch controlling VBUS delivery to two independent peripheral rails. Use Value: Enables independent port enable/disable with <100 µA quiescent current and fast turn-off (<100 ns). | Use Scenario: Power sequencing for multi-sensor IoT nodes with separate analog and digital subsystems. IC Role / Device Role / Timing Role: Independent power domain control for MEMS accelerometer and BLE SoC sections. Use Value: Reduces system standby power by isolating unused sensor blocks while preserving MCU wake-up capability. |
| Automotive Body Control | Industrial PLC I/O Module |
Use Scenario: Controlled power delivery to LED lighting clusters and window motor drivers in door modules. IC Role / Device Role / Timing Role: High-side switch for 12 V loads with integrated overtemperature shutdown. Use Value: Eliminates need for discrete thermal foldback circuitry due to built-in junction temperature sensing. | Use Scenario: Isolated 24 V DC field power switching for digital input/output channels. IC Role / Device Role / Timing Role: Dual-channel reverse-polarity protected load switch for DIN-rail mounted controllers. Use Value: Provides inherent reverse-voltage blocking without external diodes, reducing BOM count and footprint. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual P-channel load switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMN2026LSD-13 | Single-channel, higher RDS(on) (90 mΩ), same VDS/ID rating | Requires two devices for dual-rail use; lacks internal source tie | Prefer when board layout allows discrete placement and thermal separation is critical. |
| SI3483DV-T1-GE3 | Dual-channel, but N-channel with charge pump; 20 V rating, 2.8 A rating | Requires gate-boost circuitry; unsuitable for direct low-voltage GPIO drive | Select only if existing design uses charge-pump-based gate drivers and space constraints prohibit redesign. |
Compared with DMN2026LSD-13 and SI3483DV-T1-GE3, PMN27XPEAX delivers true dual-channel integration with logic-level compatibility and AEC-Q101 validation-making it optimal for space-constrained, automotive-grade, and low-voltage-control applications where gate simplicity and qualification matter.
Availability
PMN27XPEAX is available at Aetrix Electronics and suitable for USB power management, smart sensor nodes, and automotive body control modules requiring stable component supply and long-term lifecycle support.
Supply support for PMN27XPEAX includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in MOSFETs, diodes, and ESD protection solutions.
PMN27XPEAX belongs to Nexperia's TrenchMOS™ dual-channel load switch product line, engineered for efficient, compact power domain control in portable and automotive electronics.
FAQ
What is the maximum allowable junction temperature for PMN27XPEAX?
The absolute maximum junction temperature is +150 °C, validated per JEDEC JESD22-A108. Operation above this limit risks permanent parametric shift and gate oxide degradation. Derating curves in the datasheet specify power dissipation limits versus ambient temperature and PCB copper area.
Does PMN27XPEAX require external gate resistors for EMI suppression?
No external gate resistor is required for basic switching, but a 10 Ω series resistor is recommended when driving at >1 MHz to dampen ringing and reduce radiated emissions. Layout-dependent parasitics may necessitate adjustment between 5–22 Ω based on oscilloscope-measured gate waveform overshoot.
Can PMN27XPEAX be used in reverse-voltage protection circuits?
Yes - its intrinsic body diode orientation enables reverse-polarity protection when placed in the high-side path. With VGS = 0 V, the device remains off during reverse input conditions, blocking up to -20 V. No external diode is needed, reducing forward voltage drop and heat generation.
Is the TSSOP-6 package compatible with standard reflow profiles?
Yes - PMN27XPEAX complies with IPC/JEDEC J-STD-020D moisture sensitivity level 1 (MSL-1) and supports standard lead-free reflow profiles (peak 260 °C, 60-second duration). The package withstands three reflow cycles without delamination or solder joint integrity loss.
PMN27XPEAX Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- *
- Package/Case:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- FET Type:
- -
- Technology:
- -
- Drain to Source Voltage (Vdss):
- -
- Current - Continuous Drain (Id) @ 25°C:
- -
- Drive Voltage (Max Rds On, Min Rds On):
- -
- Rds On (Max) @ Id, Vgs:
- -
- Vgs(th) (Max) @ Id:
- -
- Gate Charge (Qg) (Max) @ Vgs:
- -
- Vgs (Max):
- -
- Input Capacitance (Ciss) (Max) @ Vds:
- -
- FET Feature:
- -
- Power Dissipation (Max):
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
PMN27XPEAX FAQ
1.How can I place an order for PMN27XPEAX through Aetrix?
Please submit a Request for Quotation (RFQ) for PMN27XPEAX on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PMN27XPEAX reliable?
The price and inventory of PMN27XPEAX are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PMN27XPEAX is usually 5 days.
3.What payment methods are accepted for PMN27XPEAX?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PMN27XPEAX transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PMN27XPEAX?
PMN27XPEAX orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PMN27XPEAX order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PMN27XPEAX?
For technical support, including PMN27XPEAX datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PMN27XPEAX requirements.
6.How does Aetrix verify that PMN27XPEAX is sourced from the original manufacturer or authorized distributors?
All PMN27XPEAX products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PMN27XPEAX meets industry standards.
7.What is the process for return or replacement of PMN27XPEAX?
All PMN27XPEAX units undergo pre-shipment inspection (PSI). If there is an issue with PMN27XPEAX, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PMN27XPEAX part is unused and in its original packaging.
Return procedure for PMN27XPEAX:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PMN27XPEAX Tags
-
BSZ180P03NS3EGATMA1
Infineon Technologies
-
SIRA14DP-T1-GE3
Vishay Siliconix
-
AO4419
Alpha & Omega Semiconductor Inc.
-
SISA14BDN-T1-GE3
Vishay Siliconix
-
PSMN9R5-30YLC,115
Nexperia USA Inc.
-
BUK9Y21-40E,115
Nexperia USA Inc.
-
RTQ035N03HZGTR
Rohm Semiconductor
-
FDMS7680
onsemi
-
RQ3E180BNTB
Rohm Semiconductor
-
STL6N2VH5
STMicroelectronics
-
DMPH4029LFGQ-7
Diodes Incorporated
-
DMT6015LSS-13
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
